PDF download Download Article
Your guide to electric brake problems in Hondas and more
PDF download Download Article

If you’re getting warning signs on your dashboard or computer screen about issues with your electric parking brake, you may wonder what your car is even referring to. Your brakes are working just fine, so what’s this electric brake business, and how serious is the problem? In this article, we’ll cover the common causes of electric parking brake failure, their solutions, and how to reset the system.

Things You Should Know

  • Clean the parking brake button so there’s no debris interfering with the switch. This is the most common cause of electronic parking brake problems.
  • Alternatively, check the fuse for the electric parking brake in the fuse box to see if it needs to be replaced.
  • If that doesn’t work, see a mechanic if you have wiring issues or the servo motor isn’t working correctly.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Section 1 of 5:

Causes of Electric Brake Issues

PDF download Download Article
  1. If the button doesn’t light up and your emergency brake doesn’t engage when you press it, the button itself is likely the problem. It could be that dust or crumbs are stuck in the area behind the button or the switch itself is somehow damaged.
    • This is the most common reason for an electric parking brake to not work correctly. Most people don’t use the electric brake all that often, so it’s rare that something fails.
  2. Since your electric parking brake isn’t mechanical (only the servo motor and brake pads physically move), the odds are high the issue is primarily electronic. You may have a blown fuse, a loose connection between two wires, or a wire that was chewed through by an ambitious squirrel. [1]
    • This is especially likely to be the case if the error ever goes away and then comes back on. This is a sign that a connection is coming loose then occasionally reconnecting.
    Advertisement
  3. A servo motor refers to any an independent motor that rotates to engage. On vehicles with electric parking brakes, there is a dedicated servo motor specifically to turn the parking brakes on. If that motor has failed or it isn’t working properly, your emergency brake won’t engage when you press the button. [2]
  4. Advertisement
Section 2 of 5:

Potential Solutions

PDF download Download Article
  1. Grab an antibacterial wipe and scrub down the button and the areas surrounding it. Use a toothpick to pry out any crumbs or junk in between the button and its housing. Once the button is sufficiently clean, try using the button like normal. If the brake works, you’re good to go! [3]
    • It’s unlikely you’ll actually need to replace the switch, but you can purchase a replacement switch for your make and model and pry the old one off to swap it out if you’d like.
  2. Turn the vehicle off and disconnect the battery terminals. Refer to your vehicle’s manual to locate the individual fuse dedicated to the servo motor and electric parking brake system. Pop the hood and remove the fuse. If the metal wire inside the fuse looks broken or fried, replace the fuse with an identical fuse designed for your make and model.
    • The fuse box is almost always under the hood near the steering wheel. There will be a plastic cover on top that you either need to unscrew or pry off.
  3. The servo motor and electrical wiring need to be inspected and repaired by a professional. Go to a dealership service center—they’ll have the replacement parts you need. The odds are high the repair will be free too, since these brakes often require software updates and adjustments due to recalls. [4]
    • The electric parking brakes are notorious for failing or running into bugs. If this is a systemic problem with your make and model, you won’t have to pay for anything at a dealer.
    • You can see a regular mechanic if you prefer, but the odds are very high the dealership will cover your costs if you bought the car through them.
  4. Advertisement
Section 3 of 5:

Resetting the Parking Brake

PDF download Download Article
  1. In rare cases, your vehicle’s computer may just need to be reset. Turn the vehicle off and pop the hood. Then, locate the negative terminal on your battery and disconnect it . Wait a few minutes then reconnect the terminal and turn your vehicle back on. If the error code went away and the parking brake now works, you’re good to go! [5]
    • This is a common solution for resetting check engine lights. It works because it forces the engine module to run a complete scan to confirm everything is working correctly. If you have a vehicle where the electric parking brake’s electrical is connected to the engine module, this may get rid of the warning.
Section 4 of 5:

What is the electric parking brake?

PDF download Download Article
  1. Electric parking brakes are common these days—especially in Hondas. They function the exact same way as a traditional emergency brake with one major difference: they aren’t mechanical. When you press the electric parking brake button, your vehicle’s computer sends a signal to a servo motor in your undercarriage which locks the wheels. [6]
    • In older vehicles, the emergency brake is a lever you physically pull which engages hydraulics and lock your vehicle’s wheels in place.
  2. Advertisement
Section 5 of 5:

How do I know if my electric brakes need service?

PDF download Download Article
  1. If you have a digital screen in the center console of your vehicle, you’ll probably get a notification there that the electric parking brake isn’t working correctly. On some Honda vehicles, you’ll get a code (like D5 or C100C01, for example) that indicate there’s a problem. [7]
    • Check your manual to find a list of your vehicle’s specific error codes or messages.
  2. If you don’t have a dashboard screen, you’ll still get a warning. Usually, a chime will come on and a little light will appear on your dash with the words “brake,” “electric brakes,” or something of the sort to let you know the electric parking brake isn’t working properly. [8]
    • Pro tip: Try engaging the brake when you get an error on the screen. Take your foot off of the normal brake and let your vehicle idle. If the vehicle moves, your electric brake isn’t working, which is important to know if you need to park on an incline or hold your vehicle in place.
  3. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • You can’t release an engaged electric brake if the battery dies, so if your vehicle is disabled, jump the battery first before you try putting it in neutral for a tow truck. [9]
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 78,916 times.

      Did this article help you?

      Advertisement