Download Article
Download Article
There are all kinds of reasons a car door lock can get jammed. For example, the tumblers inside the lock might be clogged up by dirt or rust. On the other hand, the mechanism could be jammed up inside the door. Either way, you can try a couple different methods to fix the lock yourself. If you aren’t able to solve the problem, call a locksmith or take your car to an auto repair shop to get the lock looked at and fixed by a professional.
Tips to Repair a Stuck Car Door Lock
Warm up the lock with a hair dryer or pour a cup of warm water over it to unjam the lock. Lubricate the car lock keyhole with WD-40 to break up any corrosion and dirt, then slide the car key into the keyhole and move it around to loosen the lock. Spray 4-5 more squirts of lubricant and repeat until the lock is loose.
Steps
Get Car Support Solve Any Problem
Try Asking:
We’re sorry we don’t support the car you are looking for. Please enter its make, model, and year below so that we can add support for it.
Thank you! We’ll review your request and add support for this product as soon as possible. In the meantime, you can ask more questions about the products we currently support.
-
Use a penetrating catalyst or WD-40 to try lubricating jammed car locks. A penetrating catalyst is a type of lubricant that will also break up rust and grime that may be jamming the lock. WD-40 is an all-purpose lubricant that will also clean off the parts inside the lock and protect them against future corrosion and grime. [1] X Research source- You can buy a penetrating catalyst or WD-40 at a home improvement center, auto supply shop, or online.
- You can try this method on either a manual or an electronic car lock, as long as there is a keyhole.
Tip : If you can’t insert your key all the way into the keyhole, or if it is difficult to do so, this is a good indication that the lock may be jammed by rust or dirt. In this case, lubricating the lock through the keyhole can fix the problem and help prevent it from happening again in the future.
-
Poke the tip of a flathead screwdriver into the keyhole to open it up. Place the tip of the screwdriver against the moveable metal piece that covers up the keyhole when there’s no key in it. Push the screwdriver in until this metal piece moves all the way out of the way so you can get lubricant into the keyhole. [2] X Research source- If you don’t have a flathead screwdriver, you can use any other thin metal object to open up the keyhole. Just make sure not to use anything breakable that could snap and get stuck in the lock.
Advertisement -
Spray your lubricant directly into the keyhole. Hold the can with the nozzle as close to the keyhole as possible. Press the cap down 4-5 times to spray a generous amount of lubricant into the keyhole. [3] X Research source- If you’re using WD-40, the can usually comes with a long skinny red straw that you can attach to the nozzle. You can stick this straw right into the keyhole to get the lubricant all the way inside.
-
Stick the car key in the keyhole and wiggle it around to loosen the lock. Remove the tip of your flathead screwdriver from the keyhole and stick your car key in. Wiggle the key back and forth to loosen up the tumblers inside the lock, then try turning the key to unlock it. [4] X Research source- If the lock is still jammed, don’t try to force it open with your key. You might end up breaking the key off inside the lock and making the issue worse.
-
Repeat the process if the lock is still jammed. Remove your key from the lock and poke the tip of your flathead screwdriver in it. Spray 4-5 more squirts of lubricant into the lock, then try unlocking it with your key again. [5] X Research source- You can also try covering the key in lubricant and sliding it in and out of the lock a few times to loosen up the tumblers inside.
- If you still can’t unjam the lock after trying this process a few times, you might have a bigger issue. You will either need to access the locking mechanism from the inside to try and unjam it or get a locksmith to fix the problem.
Advertisement
-
Remove the interior door handle or the entire door panel to access the lock. Use a Phillips-head screwdriver to remove the screw that holds the door handle plate in place and pry the plate off the door, if your car door has a removable interior handle. Take out all the screws and plastic clips that hold the door panel in place and pull the panel off the door, if you cannot remove just the door handle. [6] X Research source- The exact procedure for removing the interior door handle or door panel varies from car to car. However, the general concept is the same. Just locate all the hardware that holds the door handle plate or door panel in place and take it out, then pull the door handle or door panel off the door.
- If you have to remove the door panel, keep in mind that some doors have a sheet of sticky insulation that you also have to remove to make repairs. It will have to be replaced afterwards. Consider getting your lock professionally repaired if you aren’t comfortable doing this yourself.
- This method may work for either an electronic or a manual car lock.
-
Locate the door lock mechanism directly underneath the door lock. Look for some type of metal plate attached to a rod right underneath the exposed door lock that moves up and down. This is the mechanism you will attempt to move to unjam your car lock. [7] X Research source- If you’re having difficulty seeing the mechanism, use a flashlight or the light on your phone to get a better look.
-
Grip the door mechanism’s rod with a pair of needle-nose pliers. Open up a pair of needle-nose pliers and grab the metal rod that attaches to the metal plate of the locking mechanism. This is the lever that moves the lock up and down. [8] X Research source -
Move the rod up and down using the pliers to unjam the lock. Hold your pliers tightly and try to wiggle the locking mechanism’s rod up and down. Push it up to unlock the door and down to lock the door. Keep moving the rod up and down until the lock goes smoothly between locked and unlocked. [9] X Research source- If it’s hard to move the rod up and down and you can’t get the lock unjammed, try spraying the whole mechanism with some WD-40 to lubricate it.
-
Test the lock out with your key and any electronic buttons. Stick your car key into the lock’s keyhole and try locking and unlocking the door a few times. Try using your car’s or key fob’s unlock and lock buttons, if you have an electronic locking mechanism in your car. [10] X Research source- If your lock doesn’t seem totally unjammed, but it feels like you're making progress, keep wiggling the mechanism back and forth using your needle-nose pliers until the locking and unlocking actions feel smooth.
- You can also try spraying some WD-40 on your key or into the keyhole to clean out, lubricate, and protect the lock against corrosion.
Tip : If your physical key works fine, but you can’t unlock the lock using your electronic key fob or a button inside the car, you probably have an electronics problem. Take your car to a mechanic to get this checked out and fixed.
-
Replace the interior door handle or door panel. Snap the panel or handle back into place. Put all the screws back in and tighten them using your Phillips-head screwdriver. [11] X Research source
Advertisement
How Do You Fix a Jammed Car Lock?
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If you don’t normally have problems with your door lock, and you find it’s jammed on a cold day, it might just be due to the temperature. You can try warming up the lock with a hair dryer or pouring a cup of warm water on it to unjam the lock. [12] X Research sourceThanks
- Lubricate your car lock keyholes with WD-40 4-5 times a year to keep the locks loose and protect the insides against corrosion and dirt. This will also disperse any water that gets in your locks to prevent them from freezing and jamming in cold weather. [13] X Research sourceThanks
- If you can’t unjam your car lock, you can always call a professional locksmith to come fix the problem for you.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Don’t ever try to force a jammed car lock with your key. You can break the key off in the lock, which will be even more of a headache for you to deal with.Thanks
Advertisement
Things You’ll Need
Lubricating a Jammed Lock
- Penetrating catalyst or WD-40
- Flathead screwdriver
- Car key
Unjamming the Locking Mechanism
- Phillips-head screwdriver
- Needle-nose pliers
- WD-40 (optional)
References
- ↑ https://www.youtube.com/watch?v=WqZ3zANad5Y&feature=youtu.be&t=23
- ↑ https://www.youtube.com/watch?v=WqZ3zANad5Y&feature=youtu.be&t=39
- ↑ https://www.youtube.com/watch?v=WqZ3zANad5Y&feature=youtu.be&t=41
- ↑ https://www.autobutler.co.uk/blog/car-door-gets-jammed
- ↑ https://www.autobutler.co.uk/blog/car-door-gets-jammed
- ↑ https://www.youtube.com/watch?v=3vuirtC-87c&feature=youtu.be&t=73
- ↑ https://www.youtube.com/watch?v=3vuirtC-87c&feature=youtu.be&t=120
- ↑ https://www.youtube.com/watch?v=3vuirtC-87c&feature=youtu.be&t=140
- ↑ https://www.youtube.com/watch?v=3vuirtC-87c&feature=youtu.be&t=170
About This Article
Thanks to all authors for creating a page that has been read 137,012 times.
Advertisement
