How to Fix a Punching Bag

PDF download Download Article
PDF download Download Article

Punching bags can withstand a lot, but even the best ones don’t last forever. Tears form, straps break, and even the filling inside your bag will wear out if you hit it enough. Instead of spending a lot of money on a new bag, you can find some clever ways to fix your old one. Most rips are pretty easy to fix even if you don’t know how to sew. You can also soften up a bag by refilling it with fresh stuffing. Take care of your punching bag to get right back into your workout routine.

Method 1
Method 1 of 3:

Repairing Tears with Tape

PDF download Download Article
  1. Pull the torn flaps back gently, then inspect them for any loose threads. Trim them so they look as neat as they possibly can. When you’re done, flatten them against the bag again unless you have some stuffing to put back in first. [1]
    • You won’t have to take the punching bag down to repair it, but you can if the tears are difficult to reach.
  2. Pull back the torn portion, then push the stuffing back inside. Make sure the bag’s outer surface is level and consistent before making any repairs. If it doesn’t seem right now, then it most likely won’t be too fun to hit later.
    • If you lost some of the stuffing, you can always replace it. They are usually filled with rags, so fill them with something similar, like old clothing.
    • When your punching bag loses stuffing, it won’t be as soft on your hands. The extra stress on your fingers and wrist increases the chance of injury.
    Advertisement
  3. Mix together about 1 cup (240 mL) of hot water and 1 tablespoon (15 mL) of dish soap. Give the torn part a good scrubbing with a sponge dampened in the soapy water. If you haven’t cleaned it in a while, you can also wipe down the rest of the bag. [2]
    • Vinegar is also an effective cleaner. Substitute 1 tablespoon (15 mL) of it in place of the dish soap, for instance.
    • If you have a leather bag, you could use a leather cleaner instead to protect it from moisture damage.
  4. Dampen a cloth or sponge lightly in warm water, then squeeze out the excess moisture before using it on the bag. Make sure you get all of the soap and any remaining debris around the flap. When you’re done, wipe it dry before starting the repair. [3]
    • The tape won’t stick very well if the bag is dirty or damp, so take plenty of time getting it clean.
  5. Cut the first length of duct tape so it overlaps the hole by 2 in (5.1 cm) on both ends. Fit it along the left or right edges of the tear. Then, place the next strip, overlapping the first one halfway. Keep placing new strips this way until the hole is covered. [4]
    • Overlapping the strips makes the repair stronger. The tape should create a strong webbing without any gaps in it. That way, it won’t fall right back apart the next time you hit it.
  6. Cut the strips so they are long enough to stretch across the web of tape you made earlier. Fit them along the top and bottom edges of the tear. Position them so they overlap the existing straps halfway. They are meant to lock the repair in place, keeping the vertical webbing stuck to the bag. [5]
  7. Cut strips of tape that are long enough to cover the duct tape. Fit the first strip over one of the pieces of duct tape you laid horizontally earlier. Then, lay another strip next to it, overlapping it halfway. Keep placing more strips this way until all of the duct tape is covered. [6]
    • To hide the repair as much as possible, choose a color of athletic tape that most closely matches the color of your punching bag.
    • Athletic tape is available online and at most sporting goods stores.
    • Once the torn part is sealed off with tape, you can safely hit it again. The seal will usually hold for a long time. If the tape comes undone, replace it to reseal the tear.
    8. Advertisement
Method 2
Method 2 of 3:

Replacing Hardened Stuffing

PDF download Download Article
  1. Believe it or not, the simplest way to soften up a worn-out punching bag is to punch it some more. You can leave it hanging and then hit or kick it until it reaches the softness you desire. However, try taking it down, sitting on it, stomping on it, and finding other ways to use it. It distributes the filler much more evenly so your bag stays in prime condition for longer. [7]
    • Punching bags harden when all the filler material sinks to the bottom. If the bag feels hard on the bottom but empty at the top, then the filler is the problem.
    • Whenever your bag needs adjustment, hit it to redistribute the filler. The fix doesn’t last forever, but you can keep doing it indefinitely to avoid having to refill the bag.
  2. Even if you soften the old filling, it will start to harden again. The only way to fix the bag is to swap out the old stuffing for a new batch. It’s a little messy, but it isn’t very difficult to do. You can make your own stuffing at home instead of buying replacement material from a punching bag manufacturer. [8]
    • The new stuffing eventually wears out too, but it lasts at least as long as the original stuffing used in the bag. Make sure you pack it well to ensure it lasts as long as possible.
    • If the stuffing starts to solidify, you can always take it down and hit it to soften it up again.
  3. Take the bag down from where it’s hanging, then find the zipper along its top edge. Unzip it to expose the filling. Have some empty trash bags nearby to collect all of the loose filling. Try to put the punching bag inside the trash bag and then tip it over to spill the filling out. [9]
    • Punching bags are filled with loose material like sand and shredded fabric. Changing out the filling can get messy, so be prepared for some of it to spill out as soon as you undo the zipper.
    • Some bags have sacks inside of them. They might be filled with water, air, sand, or something else. If they are still in good shape, you could reuse them.
  4. Collect a bunch of used clothing you don’t mind shredding up. Use a sharp pair of scissors to cut off zippers, buttons, and any other metal parts that could puncture your bag. Don’t worry about cutting the clothing, since you won’t ever see it once it’s inside the bag. [10]
    • Cut clothing scraps are perfectly fine to use, but make sure you stuff them down around the bag. Using uncut clothing is easier since it fills the space faster with less mess.
  5. Get a few resealable plastic bags that can hold up to 1 US qt (950 mL) of sand. Buy some play sand and use it to fill the bags up as much as possible. Then, close the bags and make sure they stay sealed. As long as the sand stays inside the plastic bag, it won’t damage your punching bag. [11]
    • You can stuff your bag with only clothing. It will be gentler on your body, but you won’t develop as much strength from hitting it.
    • If you don’t have sand available, you could use sawdust, grains, or something similar. Pick something that adds weight to the bag but won’t hurt your hands if you hit it.
  6. At the very least, wrap a piece of tape across the resealable end of each bag to prevent it from bursting open when you hit it. For additional protection, cover the entire bag with tape. Keep wrapping the tape around the bag until you are no longer able to see the plastic underneath it, then cut it from the roll. If you see any exposed spots, cover them with another piece of tape. [12]
    • You can’t really use too much tape, so add more if the bag doesn’t look too protected. More cushioning is better, since a burst bag creates a big mess that could wear down the inner part of your punching bag.
  7. Open up the bag, then place a sealed sandbag in the center. Surround it with clothing to protect it from damage. Pack in as much clothing as you can so the punching bag is thick and well-cushioned.
    • Keep the filling centered in the bag so it receives as little impact from your punches and kicks as possible. The clothing is meant to soften the blows, and it won’t work if the sandbags are on the outside or shift around while you’re training.
  8. If you don’t have a bat available, find something solid, like the pole end of a rake or broom. Press down on the clothing, taking care not to break the sandbag in the center. Afterward, check how cushioned the sandbag is. You will probably see some space around it. Put some more clothing in to protect it. [13]
    • Get the stuffing nice and tight. You will end up with room to stuff in more clothing to pad the sandbags and hold them in place.
  9. Keep adding more clothing to the bag, pressing it down with the bat. After filling it with 1 ft (0.30 m) of material, place another sandbag in the center. Add another layer of clothing, compressing it with a bat. Continue alternating sandbags and clothing until the entire bag is full. [14]
    • Once the bag is full, zip it up and hang it to test it out. Make sure it feels full but comfortable to use.
    • With regular use, punching bags tend to last about a year. You can then replace the stuffing or readjust it to make the bag soft enough to comfortably hit again.
  10. Make sure the bag is fully packed with the stuffing underneath the zipper at the top. Pull the zipper closed, then lift it up, using a small stepladder if you need it. Clip the bag to the hanging hook on its stand or ceiling mount, then give it a test run. [15]
    • Before hanging the bag, test it out. Try hitting it a few times. Make sure you’re happy with the consistency so you don’t have to take it back down again.
    11. Advertisement
Method 3
Method 3 of 3:

Reattaching Broken Straps

PDF download Download Article
  1. Set up a small stepladder if you need it to reach the bag. The straps will be tied around at least one ring clipped to the mount. Pull back the latch on the ring to open it, then lower the bag to the floor. [16]
    • Have a friend help you catch the bag. You can do it on your own, but it’s easier to have someone else support its weight while you climb down the ladder.
  2. Unscrew the metal cap on top of the awl and take out anything inside of it. Place a bobbin of heavy sewing twine in the awl instead. Slide the end of the twine through the hole in the side, making sure it doesn’t get tangled at all. Then, place the metal cover back on top of the awl. [17]
    • A sewing awl is a handheld tool that punches through thick straps so you can thread string through them. You could use a sewing machine, but awls are a beginner-friendly way to do it by hand.
  3. Generally, select a strap about 40 in (100 cm) long and 20 in (51 cm) wide. If you’re unsure about what size to get, measure the old strap. Make sure the new one is long enough to fold in half. Try to get the kind used camping bags and other accessories, since they are very strong and more than capable of bearing a punching bag’s weight. [18]
    • You can find straps available online and at many outdoor supply stores. Another option is to repurpose an old seatbelt.
    • If the strap is completely broken, purchase a new length of nylon webbing. It’s available online and at most camping supply stores. You could also repurpose an old seatbelt.
    • If the old strap is fixable, you could put a length of material behind it, like nylon webbing, and then sew them together for reinforcement.
  4. Look for a small, metal thread holder near the hole you passed the twine through earlier. Loop the thread around the metal, keeping the tail end underneath it. Then, slip the thread through the groove above it until it comes out of the top end of the awl. Thread it through the cap, screw the cap clockwise onto the awl, then insert the needle into the cap to move the thread through it. [19]
    • Your awl may come with a straight and curved needle. Use the straight needle to repair broken straps.
  5. Hanging punching bags usually have 4 straps that each connect to a metal ring at the top. Loop the end through the ring, tucking it underneath the rest of the strap. Make sure you pull the strap as tightly as you can. [20]
    • The tail end has to be folded over the rest of the strap by at least 2 in (5.1 cm) in order to effectively sew it together. If the damaged strap is too short for this, consider replacing it.
    • If you’re trying to connect a new strap directly to a punching bag, unzip it so you’re able to reach the awl when it passes through the fabric. It’s easier to do when the stuffing is out of the bag.
  6. Measure about 1 in (2.5 cm) from the hanging ring. Sketch a line across the width of the strap. Then, measure another 1 in (2.5 cm) back from that and make another line. These lines will help you keep the stitches straight so the new strap not only holds up but looks great. [21]
    • Use these lines to keep your stitches nice and straight. If you’re going to add additional lines to strengthen the strap, mark them 1 in (2.5 cm) above one another.
  7. Hold onto the end of the strap to keep it taught. Position the needle about 1 ⁄ 2  in (1.3 cm) from the strap’s edge. Then, push the awl through the pencil line you marked. Punching through the material can be tough, so be prepared to use some force. [22]
    • Leave the loose thread hanging from the hole while you continue to work. You can use it to knot the thread and finish each stitch.
  8. Move the hole to the second line, which will be closer to the hanging ring. Move the needle so it’s about 1 ⁄ 2  in (1.3 cm) ahead of the initial hole. Then, press down until the awl punches through the strap again. Don’t pull the needle back out just yet. [23]
    • The exact spacing isn’t as important as keeping it consistent for each stitch. Leave yourself enough space to place more holes when you stitch in the opposite direction later.
  9. Check near the needle for a small loop of twine. If you don’t see it, pull the awl back out slightly so the thread separates from it. Take the tail end of twine hanging from the first hole and slip it through the loop. Pull the awl back out, then pull both ends of the string tightly to create a lock stitch. [24]
    • Pull the twine tightly so it stays knotted against the strap. Remember to leave the twine long enough so you can keep adding more stitches as you move across the strap.
  10. Move the awl back up to the first line, spacing the needle at least 1 in (2.5 cm) ahead of the initial hole. After the awl breaks through the strap, pull it back to create the loop, pass the twine through it again to knot it, and then pull it tight. Then, poke a hole through the second line again. Keep switching back and forth until you reach the end of the strap. [25]
    • Space the holes out consistently so the stitching is strong and even. If you’re unsure how it should look, take a look at the other straps on your bag.
  11. Start at the far end of the strap, placing the needle on the line opposite from the last hole you made. Poke it through, then knot the stitch like usual. This time, each hole you make will be opposite from one you made originally. You will end up creating a zigzag pattern that keeps the strap strong so it can’t break apart when you hang the punching bag. [26]
    • To strengthen the stitching, move up about 1 in (2.5 cm) along the strap and continue stitching. If you’re able to do it 3 to 5 times, the stitching will be really strong.
    • When you reach the last stitch, pull the thread tight, knot the loose ends, and then cut off the excess length.
    12. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If you’re unable to fix a bag yourself, contact a shoe repair shop. Professional cobblers are often able to sew punching bags back together at a low price.
        Thanks
        Helpful 2 Not Helpful 0
      • Caring for your punching bag is important, so, if you keep it outside, expect it to wear out at a faster rate.
        Thanks
        Helpful 1 Not Helpful 0
      • A damaged punching bag is an inevitability no matter how good you are at taking care of it. Be prepared for yours to eventually be replaced, although you can preserve how long it lasts by cleaning, storing, and mending it.
        Thanks
        Helpful 1 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      Repairing Tears with Tape

      • Duct tape
      • Athletic tape
      • Scissors

      Replacing Hardened Stuffing

      • Scissors
      • Sand
      • Old clothing
      • 1 US qt (950 mL) sandwich bags
      • Stepladder (optional)

      Reattaching Broken Straps

      • Nylon webbing
      • Sewing awl
      • Thick sewing twine
      • Straight sewing needle
      • Scissors
      • Stepladder (optional)

      You Might Also Like

      How to
      Wrap Your Hands for Boxing
      How to
      Box
      How to
      Make a Punching Bag
      How to
      Train for Boxing
      How to
      Hang a Heavy Bag
      How to
      Become a Professional Boxer
      How to
      Wear Hand Wraps
      How to
      Punch Harder
      How to
      Make a Fist
      How to
      Do Boxing Footwork
      How to
      Slip Punches in Boxing
      How to
      Adjust Punching Bag Height
      How to
      Do a Dempsey Roll
      How to
      Keep a Punching Bag Stand from Moving
      Advertisement

      References

      1. ↑ https://www.bobvila.com/slideshow/12-things-you-didn-t-know-duct-tape-can-do-49778#how-to-fix-a-hole-in-a-window-screen
      2. ↑ https://www.athleticbusiness.com/fitness-training/how-to-clean-your-high-end-fitness-equipment.html
      3. ↑ https://www.athleticbusiness.com/fitness-training/how-to-clean-your-high-end-fitness-equipment.html
      4. ↑ https://www.sportsrec.com/1001998-fix-ripped-punching-bag.html
      5. ↑ https://www.bobvila.com/slideshow/12-things-you-didn-t-know-duct-tape-can-do-49778#how-to-fix-a-hole-in-a-window-screen
      6. ↑ https://www.sportsrec.com/1001998-fix-ripped-punching-bag.html
      7. ↑ https://www.youtube.com/watch?v=kXlYKV_mfgg&feature=youtu.be&t=55
      8. ↑ https://smartmma.com/how-to-fill-a-heavy-punching-bag/
      9. ↑ https://www.youtube.com/watch?v=jUp84OvW8qg&feature=youtu.be&t=12
      1. ↑ https://www.youtube.com/watch?v=jUp84OvW8qg&feature=youtu.be&t=13
      2. ↑ https://smartmma.com/how-to-fill-a-heavy-punching-bag/
      3. ↑ https://www.youtube.com/watch?v=xbtU1J0cTJY&feature=youtu.be&t=311
      4. ↑ https://www.youtube.com/watch?v=xbtU1J0cTJY&feature=youtu.be&t=584
      5. ↑ https://www.youtube.com/watch?v=jUp84OvW8qg&feature=youtu.be&t=49
      6. ↑ https://smartmma.com/how-to-fill-a-heavy-punching-bag/
      7. ↑ https://www.youtube.com/watch?v=lmwXhmX9_nY&feature=youtu.be&t=81
      8. ↑ https://www.youtube.com/watch?v=c6OatKzjeD0&feature=youtu.be&t=35
      9. ↑ https://www.youtube.com/watch?v=wf6buu7PqT4&feature=youtu.be&t=49
      10. ↑ https://www.youtube.com/watch?v=c6OatKzjeD0&feature=youtu.be&t=63
      11. ↑ https://sacotin.com/en/adjustable-strap-tutorial/
      12. ↑ https://www.youtube.com/watch?v=5Ie5HjU6_9M&feature=youtu.be&t=246
      13. ↑ https://www.youtube.com/watch?v=SFx-NZP49d8&feature=youtu.be&t=130
      14. ↑ https://www.youtube.com/watch?v=SFx-NZP49d8&feature=youtu.be&t=148
      15. ↑ https://sewguide.com/invisible-stitches/
      16. ↑ https://www.youtube.com/watch?v=5Ie5HjU6_9M&feature=youtu.be&t=327
      17. ↑ https://www.youtube.com/watch?v=5Ie5HjU6_9M&feature=youtu.be&t=398

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 84,882 times.

      Did this article help you?

      Advertisement