How to Fix a Treadmill

PDF download Download Article
PDF download Download Article

Treadmills are large pieces of exercise equipment that can take a lot of abuse over the years. They're designed to withstand repeated impact, but, like many complicated machines, they can malfunction in a variety of ways. Instead of buying a replacement when your treadmill acts up, consider trying to fix the problem yourself. Try one of these troubleshooting methods if your treadmill is malfunctioning.

Method 1
Method 1 of 3:

Troubleshooting a Treadmill That Won't Turn On

PDF download Download Article
  1. The easiest problem to fix, and probably the most common, is a that your treadmill is just not plugged in. Make sure your treadmill is plugged into an electrified electrical outlet and that the prongs on the treadmill's power plug are not bent or distorted in any way.
  2. Plug the treadmill into a different outlet to eliminate the first outlet as the issue. If you do not have another outlet nearby, plug another device, such as an easily movable lamp, into the treadmill's outlet to see if it works.
    • If you know which outlets are on separate circuits, try using an outlet that is powered by another circuit.
    • If you don't have any power at the outlet, reset the circuit breaker or replace the fuse and try to turn your treadmill on again.
    Advertisement
  3. Some treadmill models need the power supply to be adjusted before it gets to the motor. Make sure that this adaptor is in place and plugged in properly.
    • Some models may need to be opened to complete this step. If this is the case, be sure to unplug your treadmill before opening any electrical boxes.
  4. In order to check for other problems, you will need to unplug the treadmill for safety.
  5. If the fuses are blown, your treadmill will not start. Luckily a blown fuse is usually a quick and easy fix. You can check your fuses with a multi-meter or take them to a local electronics store for testing. [1]
    • If your fuses are blown, be sure to replace them with fuses that are that have the same amperage rating. [2]
  6. If your machine won't turn on, it may just be that the screen of your treadmill is not working. Make sure that all of the wires between the treadmill and the display are secure.
    • Also check that you are getting power to the display. You can check this by using your multi-meter at the connection points between the power coming in and the display. [3]
  7. If you are unable to find the problem with the previous steps, you may need to consult a professional.
    • If available, contact the manufacturer for information on further diagnostics to perform and for a list of qualified repair shops in your area.
    8. Advertisement
Method 2
Method 2 of 3:

Fixing a Malfunctioning Treadmill Belt

PDF download Download Article
  1. Determine whether the problem is with the belt itself or a mechanical issue with the belt drivers.
    • Making this determination will help you make your next step. If the problem is with the belt itself, you may be able to make repairs relatively easily yourself. Motor or mechanical issues may be more difficult to fix at home.
  2. When making repairs on your treadmill, it is very important to make sure it is unplugged so that it does not accidentally get turned on and injure you.
  3. Spray a towel with a cleaning solution and wipe down the belt. Dirt and debris can collect on the belt, which can slow it down. Debris can also drop from the belt into the interior of the treadmill, causing operating problems.
    • Begin cleaning at the top of the belt and tug the belt firmly to move it downward until you have cleaned the entire surface.
    • Be sure to let the surface get really dry before you use the machine. A wet belt could cause you to slip and injure yourself.
  4. Adjust the belt so that it is centered in the machine. Belts can stretch and begin to lean to one side after frequent use. You can try repositioning the belt from the outside of the treadmill by pulling gently away from the slanted side.
    • If the problem is severe, a technician should look at the issue.
  5. If the belt on your treadmill hesitates when you step on it, you may need to lubricate it. This reduces belt friction and can lengthen the life of the belt.
    • Buy treadmill belt lubricant or any silicone lubricant. Spray lubricant in a thin layer between the belt and the treadmill deck. [4] For more information on how to lubricate your treadmill's belt see: How to Lubricate the Deck of a Treadmill.
  6. The speed sensor helps to move the belt. If the belt is jerking or not increasing in speed, the sensor might be dirty or have become detached.
    • The sensor is usually in the interior of the treadmill's bulk, near the belt. Consult your owner's manual for the exact location on your machine.
  7. If previous steps do not eliminate the problems you are having with your treadmill belt, you may want to replace it. Order a replacement from the manufacturer if you want to do the repair yourself. Make sure it is the correct model for your treadmill.
    • You may want to take your treadmill to a professional repair person to replace your treadmill belt.
    8. Advertisement


Method 3
Method 3 of 3:

Fixing a Treadmill Motor

PDF download Download Article
  1. Failure of the motor can be one of the most expensive problems with a treadmill, so make sure to eliminate all other problems before diving into motor repairs. [5]
  2. This should tell you what kind of problems are occurring with your treadmill motor.
    • The manual may also tell you whether or not the problem can be fixed by you or needs to be fixed by a professional.
  3. Inspect the motor's connections. For non-experts, inspecting a motor might be fruitless. If nothing strikes you as being obviously wrong, you might need to consult a professional.
    • Be warned, opening up your treadmill's motor is likely to void any warranties you may have on the treadmill. If your treadmill is still under warranty, it may be best to forgo any home repairs and go directly to a professional repair person.
  4. This step should only be undertaken if you have a lot of knowledge about motors and can easily read an electronics schematic.
    • Treadmill motors can be purchased at exercise equipment outlets both online and in physical stores.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What is wrong if the motor on my treadmill is fine, and everything on the panel works, but the walking belt will not move?
    Community Answer
    Mine did the same, but blew the main fuse. I traced the fault to a damaged component on the motor main board. You might have a damaged motor control board which can be repaired if you look online.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 68
  • Question
    Why won't my treadmill turn on?
    Bat 🦇
    Top Answerer
    See if the power cord is damaged.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 14 Helpful 43
  • Question
    Where are the fuses located on a treadmill?
    Community Answer
    In the fuse box, but some treadmills put them in the plug if you live in the UK. Anywhere with a two-pin plug tends to not have a fuse, so you need to manually discharge the treadmill.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 18 Helpful 39
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • If your treadmill begins smoking or emits a burning smell, stop using it immediately and unplug it from its power source.
        Thanks
        Helpful 22 Not Helpful 5
      • Do not work on a treadmill while it is connected to a power source. You could be electrocuted, or the treadmill belt could begin to move unexpectedly.
        Thanks
        Helpful 3 Not Helpful 0
      • Never use a treadmill that is not working properly.
        Thanks
        Helpful 4 Not Helpful 2
      • Do not open the motor if you want to retain your manufacturer's warranty.
        Thanks
        Helpful 4 Not Helpful 2
      Advertisement

      Things You'll Need

      • Multi-meter
      • Cleaning solution
      • Towel
      • Screwdriver
      • Silicone lubricant

      You Might Also Like

      How to
      Maintain Your Treadmill
      How to
      Use a Treadmill
      The Easiest Ways to Cancel a Crunch Gym Membership
      Cancelling an EOS Fitness Membership
      How to
      Cancel an LA Fitness Membership by Mail & More
      Minimum Ages for Children to Go to the Gym (And Where They Can Work Out)
      How to
      Burn 1000 Calories at the Gym
      How to
      Cancel Your Planet Fitness Membership by Phone or Mail
      How to
      Use Gym Equipment
      How to
      Hang a Pull‐Up Bar
      The Complete Guide to Cable Curls, Plus Variations and Mistakes to Avoid
      How to
      End Your Gym Membership Without Paying Cancellation Fees
      What to Wear to the Gym
      What Is the Suicide Grip? (And Why You Shouldn't Use It)
      Advertisement

      References

      1. ↑ http://www.treadmilldoctor.com/how-to-test-a-fuse
      2. ↑ https://www.electricalsafetyfirst.org.uk/guidance/safety-around-the-home/plugs-and-fuses/
      3. ↑ https://learn.sparkfun.com/tutorials/how-to-use-a-multimeter/all
      4. ↑ https://www.lifespanfitness.com/fitness/resources/articles/how-to-lubricate-your-treadmill-belt
      5. ↑ http://www.treadmillreviews.net/how-to-fix-common-treadmill-problems/
      6. Videos provided by RJ The Bike Guy

      About This Article

      Article Summary X

      To fix a broken treadmill belt, first unplug the machine to avoid any injuries if the treadmill accidentally gets turned on. Then, clean the surface of the treadmill belt with cleaning solution to remove any debris, which can cause the belt to slow down. If the belt is off-center, try repositioning it from the outside to straighten it out. You may also need to spray treadmill belt lubricant between the belt and the deck if you feel friction when you step on the belt. If the belt is jerking or isn’t increasing in speed, check to see if the speed sensor has become dirty or detached. To learn how to fix the motor in your treadmill, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 511,350 times.

      Reader Success Stories

      • Margaux DeJoli

        Jan 4, 2018

        "Two different treadmill repair guys said I needed to replace the motor but for $1000 to replace. I thought I'd ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement