PDF download Download Article PDF download Download Article

If you’re new to archery, you may be under the impression that this sport is all about sending arrows all over the place. But as you progress as an archer, you’ll learn that adjusting your equipment and fine-tuning your gear to suit you best can gain you major advantages! In this article, we’ll break down everything you need to know about fletching arrows so that you can hit your mark and master your bow.

1

Prep the arrow.

PDF download Download Article
  1. [1]
  2. Advertisement
2

Choose your fletching.

PDF download Download Article
    • Straight fletchings are those which sit on a straight line along the arrow shaft. Off-set or helical fletchings grasp the shaft at an angle or twist along the shaft, introducing torque in the arrow's flight for increased range.
3

Set the arrow in a jig.

PDF download Download Article
  1. Adjust its position depending on the type of fletching you've decided to use. [2]
  2. Advertisement
4

Measure your cut.

PDF download Download Article
  1. Use a grease pencil or marker to mark the spot.
5

Line the fletching up.

PDF download Download Article
  1. Use the jig's measurement feature to line up the fletching with how far it will be from the end of the arrow shaft. [3]
  2. Advertisement
6

Lock the shaft in place.

PDF download Download Article
  1. Take particular care to line it up evenly and at the appropriate measurements so that the fletching will adhere evenly and in the right spot.
7

Apply glue.

PDF download Download Article
  1. The glue should be in a line equal to the length of your type of fletching. Adjust the direction of your glue line for off-set or helical fletchings. [4]
  2. Advertisement
8

Fill in the edge of the fletching.

PDF download Download Article
  1. Do not use too much glue, as this will spill out and affect the flight of your arrow. [5]
9

Tighten the clamp.

PDF download Download Article
  1. A magnet built into the jig should keep the clamp tight without you having to hold it.
  2. Advertisement
10

Let the clamp sit.

PDF download Download Article
  1. It shouldn’t take too long for the glue to harden.
11

Remove the arrow.

PDF download Download Article
  1. Gently push on the fletching to ensure that it doesn’t move.
  2. Advertisement
12

Add glue to the feathers.

PDF download Download Article
  1. Do this at the end of each arrow.
    • Pro-tip: You can also put a dot of glue on the tip of each arrow, too. This will keep any leaves or branches from sticking to your arrow when you fire it.
13

Wait 2-3 hours.

PDF download Download Article
  1. It doesn’t take super long for the arrow to become usable.
  2. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I determine if you should shoot right or left helical?
    Jerzy „Xinef” Redlarski
    Community Answer
    You can choose either, there's no right or wrong choice here, since all it affects is whether the arrow will turn clockwise or counterclockwise in flight. Your handedness and shooting style doesn't matter, you can choose either left or right helical just fine. That said, there are a few things to keep in mind: Use only left-wing feathers for left helical and right-wing for right helical. Vanes are neutral and can go both ways. For screw-in arrowheads, some people recommend right helical because when the arrow is spinning fast when it hits the target, left-helical arrows may loosen the screw, while right-helical will tighten it. Other people just add glue/wax to secure the screws.
  • Question
    For a right handed shooter, should the helical be on the left or right?
    Community Answer
    It shouldn't matter, as the helical is a curved fletching, just so long as you have the one fletching pointing away from the bow.
Ask a Question
      Advertisement

      Video

      Tips

      • It is possible to fletch by hand without a fletching jig, but this is not recommended to anyone without extensive experience, as proper fletching is essential to having accurate arrows.
      • Straight fletchings are most often spaced around the arrow shaft at angles of 120 degrees.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • After rubbing the shaft down with alcohol, refrain from touching the area of the shaft where you will be applying the fletching. Skin oils can cause your fletching to adhere unevenly.
      • Only attempt to fletch an arrow with off-set or helical fletchings if you have been instructed beforehand in how to operate your specific jig for that purpose. An inaccurately measured or positioned off-set or helical fletching can impede your arrow's progress rather than improve it.
      Advertisement

      Things You'll Need

      • Arrow shaft
      • Fletchings
      • Fletching jig
      • Powerful glue
      • Denatured alcohol
      • Clean rag

      About This Article

      Thanks to all authors for creating a page that has been read 157,344 times.

      Reader Success Stories

      • Buddy Clarkson

        Oct 23, 2016

        "Honestly, I'm a rookie to archery, not quite familiar with arrow fletching. But after viewing this ..." more
      Share your story

      Did this article help you?

      Advertisement