How to Flush a British Toilet

Co-authored by wikiHow Staff

Last Updated: January 27, 2024 References

British toilets come in a variety of shapes and sizes. Many of the older ones, especially those found in turn-of-the-century homes and Bed and Breakfasts, require a little know-how in order to flush them. In contrast, the newer dual flush models can be a bit tricky.

Method 1

Method 1 of 3:

Flushing a Toilet with a Lever

Download Article

Though many countries have “squat style” toilets, British toilets are almost always designed for sitting. In this aspect, they are usually similar to other Western style toilets. ^{[1]
X
Research source}
Be sure that you push the lever as far down as it will go, but don’t hold it there for more than a second. Release it quickly after you feel it stop.

Advertisement
If a single flush didn’t work, wait until the toilet refills itself, and try again. This time, try holding the lever at the bottom for a couple of seconds. Some older toilets require a bit longer for the tank to drain or fill.

Method 2

Method 2 of 3:

Flushing a Chain-Pull Toilet

Download Article

Sit on the toilet, drop your waste, and then dispose of your paper.
Older British toilets often do not come with a lever. Instead, they have a chain, which is typically attached to the wall. ^{[2]
X
Research source}
Don't pull too hard or you may snap the chain or lever at the top. If the water does not flow, or flows very slowly, you may need to try a quicker movement. Don’t pull hard; just increase your speed a bit. ^{[3]
X
Research source}
4
Release the chain as soon as you hear or see water. The toilet will continue flushing. There is no need to hold the chain down, and doing so may cause the toilet to malfunction. ^{[4]
X
Research source}
- Should the toilet keep on running for more than a few minutes, flush again, and this time release the tension on the chain gently. (On a properly functioning toilet, you should be able to just let go, but older toilets may be in disrepair.) ^{[5]
  X
  Research source}

Method 3

Method 3 of 3:

Flushing a Dual Flush Toilet

Download Article

Sit and relieve your bowels. Dispose of your toilet paper. Dual flush toilets are usually of a more modern variety.
2
Locate the buttons on the top of the toilet. Look for signs that show you which button is which. Some dual flush toilets have decals that tell you how much water each button offers. Others will have larger buttons for the larger flush and smaller buttons for the smaller flush. ^{[6]
X
Research source}
- In some cases, dual flush toilets will have up-and-down levers instead of buttons. If this is the case, look for signs that tell you whether to pull the lever up or push it down (based on whether you have deposited liquids or solids). ^{[7]
  X
  Research source}
3
Push the appropriate button. You’ll need the smaller flush for liquids and the larger flush for solids. Be sure to push the button firmly, as far as it will go, but don’t hold it down for more than a second. ^{[8]
X
Research source}
- Dual flush toilets usually offer a .8 gallon flush and a 1.6 gallon flush. ^{[9]
  X
  Research source}
4

Ensure the toilet bowl is empty before leaving. If the toilet bowl is not fully clean, simply flush the toilet again.

Community Q&A

Search

Add New Question

Question

Do I need to shut the lid while flushing?

Community Answer

It does not matter if you shut it or not. You can if you please, but you do not have to shut the lid before flushing it. Closing the lid, however, does prevent germs spreading, so is recommended.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 12 Helpful 11
Question

How do I fix a dual-flush toilet from continuously flushing?

Community Answer

If possible, lift the top of the cistern up. Sometimes this stops continuous flushing. However, you will not be able to do this in some public toilets where the toilet mechanics are hidden behind a panel.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 6
Question

I'm British, what is the point of this tutorial? Flushing the toilet is easy!

Community Answer

This tutorial is most likely for immigrants or tourists who are coming to Britain and perhaps have never even encountered a flush toilet.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 9 Helpful 28

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Before using an unfamiliar toilet, it’s a good idea to locate a plunger, just in case.

Thanks
Helpful 1 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

Log in

How to Flush a British Toilet

Steps

Flushing a Toilet with a Lever

Flushing a Chain-Pull Toilet

Flushing a Dual Flush Toilet

Community Q&A

Tips

You Might Also Like

References

About This Article

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories