PDF download Download Article PDF download Download Article

Hanging a canvas painting is easy with a few simple tools! Whether you want to hang a large statement piece in an entranceway or a small, child's painting in a family room, the process is still straightforward and simple. First, calculate the correct height for the center of your canvas to be from the ground. Then install either a wire hanging or a sawtooth hanger so that you can hang the canvas securely. If you want a quick, simple method, you can also just hang the canvas on a broad-headed nail.

Method 1
Method 1 of 4:

Calculating the Right Height

PDF download Download Article
  1. Rest the canvas on a flat surface and get a tape measure or a ruler. Measure from a top corner of the canvas to the bottom corner and write the measurement down. Then take the height of the canvas and divide it by 2 to find the height of the center. [1]
  2. Art galleries and museums tend to position the center of artworks at approximately 57 in (140 cm) from the ground, as this is at eye level for the average person. Take the height of the canvas center and add 57 in (140 cm) to determine how high the top of the canvas needs to be from the ground. [2]
    Advertisement
  3. Use the measuring tape to measure the height on the wall where the painting will hang. Draw either a small dot or a cross shape that you can see clearly. This is how high off the ground the top of the canvas needs to be. [3]
    • Alternatively, you can use chalk instead of a pencil.
    • Try not to press too firmly, as you may damage the wall.
  4. Advertisement
Method 2
Method 2 of 4:

Attaching a Wire Hanging

PDF download Download Article
  1. Turn the canvas over and rest it on a flat surface like a table. Measure the height of the canvas and divide it into thirds. Then use a pencil to mark a 1/3 measurement down each vertical wooden stretcher bar. This is where the steel eye screws will go. [4]
    • Double check that both sides are even before you proceed.
  2. Take a steel eye screw and find the marking that you just made. Push the steel eye screw into the wooden stretcher bar where the marking is and twist it firmly until it feels straight. Repeat the process with the second steel eye screw on the other wooden stretcher bar. [5]
    • Ensure that you twist the steel eye screws in straight so that they don't damage the wooden stretcher bars or the canvas.
  3. Use a measuring tape to measure out the piece of steel wire and then wire cutters to cut it to size. The extra length of wire is so that it can loop easily through the steel eye screws to make the wire hanging secure. [6]
  4. Thread each end of the steel wire through the steel eye screws and make a loop at each end. Each loop should look like a “6”. Then pull the steel wire gently to tighten each knot. Keep the steel wire relatively loose between the steel eye screws, but tight at the knots. [7]
    • Aim for the stretched steel wire to be loose enough so that when it's stretched upward, the middle point is 2–3 in (5.1–7.6 cm) below the top of the canvas.
  5. It's important to get the loose steel wire ends out of the way so that they don't damage the canvas. Weave each end tightly around the steel wire itself so that the wire hanging looks neat and tidy. [8]
    • The wire hanging is now complete and ready to use.
  6. Insert either a nail or an adhesive picture hook on the wall. Carefully place the center of the wire hanging over the nail or hook to hang the canvas. Keep supporting the canvas until you are sure that the wall and wire hanging are bearing the weight securely. [9]
  7. Advertisement
Method 3
Method 3 of 4:

Attaching a Sawtooth Hanger

PDF download Download Article
  1. Check the labels of the sawtooth hangers and make sure that you choose one that can safely support the weight of the canvas. Generally, the larger the canvas, the larger the sawtooth hanger you'll need. [10]
    • You can find a sawtooth hanger online or at your local hardware store.
  2. Turn the canvas over to expose the wooden stretcher bars and make sure it's oriented the right way, with the top wooden stretcher bar at the top. Use a measuring tape or a ruler to find the center point and mark this with a pencil. [11]
    • This is where the sawtooth hanger will go.
    EXPERT TIP

    Peter Salerno

    Installation Expert
    Peter Salerno is the owner of Hook it Up Installation, a professional installation company, which has been hanging art and other objects around Chicago, Illinois for over 10 years. Peter also has over 20 years of experience installing art and other mountable objects in residential, commercial, healthcare and hospitality contexts.
    Peter Salerno
    Installation Expert

    Try using 2 sawtooth hangers for even more stability. Peter Salerno, the owner of Hook It Up Installation, says: "If you just use one sawtooth hanger in the center, it can be difficult to keep your picture straight, unless you secure the bottom as well. I recommend putting a hanger about 3 in (7.6 cm) in on either side, which will give you a more stable hanging."

  3. Take the sawtooth hanger out of the packet and align it over the center mark that you drew on the wooden stretcher bar. It's usually easy to tell the middle point of the sawtooth hanger, as most of them have a small notch. [12]
    • Use a measuring tape or ruler to find the middle point of the sawtooth hanger if it doesn't have a notch.
  4. Hold the sawtooth hanger in place carefully and gently hammer a nail into each of the allocated spaces so that it attaches to the wooden stretcher bar. Make sure that you position the sawtooth hanger straight so that the canvas hangs correctly. [13]
    • Avoid using too much force as you hammer in the nails in, as you could damage the canvas.
  5. Place a nail into the wall or apply an adhesive picture hook. Rest the raised section of the sawtooth hanger over the nail and adjust it until it feels secure. Take a few steps back, check if the canvas that straight, and tilt it slightly if you need to. [14]
  6. Advertisement
Method 4
Method 4 of 4:

Using a Nail

PDF download Download Article
  1. A single nail is all you need to hang a canvas quickly and easily! Although this method is fast and simple, it is the least secure option as it doesn't provide as much support for the canvas as a wire hanging or a sawtooth bracket. This is only recommended for small and inexpensive artworks. [15]
    • Try to pick a nail that has a relatively broad head, compared to one with a very fine head. This is more secure for the canvas to rest on.
  2. Position the nail on the wall using your non-dominant hand to hold it in place. Then use a hammer to gently insert the nail into the wall. Try to insert it at a slight upward angle so that the canvas is more likely to stay secure. [16]
    • Remember not to hammer the whole nail into the wall, as the head and approximately 1/3 of the nail need to remain out so that the canvas can have support.
  3. Position the top wooden stretcher bar over the top of the nail in the wall. Aim for the nail to be in the middle point of the top wooden stretcher bar so that the canvas hangs straight. Don't let the canvas go until you are confident that the nail is supporting the full weight of the canvas. [17]
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • Use a spirit level to check if the canvas hangs straight. Place the spirit level on top of the canvas in the center and take a step back and look at where the bubble in the spirit level is positioned. If the canvas is hanging straight, the bubble will be in the center between the marked lines on the spirit level. If the canvas is slanted, the bubble will be off to one side. [18]
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Calculating the Right Height

      • Measuring tape or ruler
      • Pencil

      Attaching a Wire Hanging

      • Measuring tape or ruler
      • Pencil
      • Steel eye screws
      • Steel wire
      • Wire cutters
      • Nail or adhesive picture hook

      Attaching a Sawtooth Hanger

      • Measuring tape or ruler
      • Pencil
      • Sawtooth hanger
      • Nails
      • Hammer
      • Nail or adhesive picture hook

      Using a Nail

      • Broad-headed nail
      • Hammer

      About This Article

      Thanks to all authors for creating a page that has been read 148,672 times.

      Did this article help you?

      Advertisement