How to Hang a Hook from a Ceiling

PDF download Download Article
PDF download Download Article

Inserting a hook into your ceiling is necessary for hanging plant baskets, paper lanterns, plug-in pendant lamps, and other suspended décor. Hanging the hook incorrectly can lead to damage to your ceiling and the suspended item. Consult the steps below to learn how to hang a hook from a ceiling safely and securely.

Method 1
Method 1 of 2:

Hanging a Hook From a Joist

PDF download Download Article
  1. Estimating the weight of the item you want to hang from the ceiling will determine what size fastener you need. Hanging a paper lantern will require a different fastener than hanging a large, heavy pendant lamp.
    • If the item you are using is less than five pounds, opt for an adhesive hook. Adhesive hooks also come in various sizes and are easy to remove without damaging the paint on your ceiling. (Note that adhesive hooks only stick on to flat ceilings, not textured ceilings.) [1]
    • If the item is especially heavy, balance out its weight using two hook screws. Install the two screws at an angle from each other, not directly vertical. [1]
  2. Hook screws are small fasteners consisting of a pointed, threaded end and a curved hook end. They can be purchased from most hardware stores and will come in different sizes based on the amount of weight they can support.
    • There are various sizes of hook screws. If your item is small, use cup hooks or, even smaller, screw eye hooks.
    • If you're looking to hang something heavier, opt for large utility storage hooks, which are strong enough to hold things like bicycles.
    Advertisement
  3. A joist is one of the beams that supports a ceiling, and it's the securest place to fasten a hook. The easiest way to locate your ceiling joists is by using a stud finder [2] .
    • You can also use earth magnets to find the location of the screws in the studs. [3]
    • If you don't have a stud finder or earth magnets, knock on the ceiling with your knuckles. The areas between joists will produce a hollow, resonant sound, while the joists will produce a shorter, firmer sound.
    • Ceiling joists are usually spaced either 16 or 24 inches (40.6 or 61.0 cm) apart from each other. Once you've located a joist, quickly find the next one by using a tape measure and measuring out either 16 or 24 inches (40.6 or 61.0 cm). [4]
    • If you have a crawl space or an attic with exposed joists, look to see which direction the joists are laid and also how far apart they're spaced.
    • Use a pencil to mark the desired location of your hook screw once you've found a suitable joist.
  4. The pilot hole will allow you to screw the hook screw into the ceiling by hand without it binding up or breaking [5] .
    • Select a drill bit that is about the same diameter as your hook screw's threaded shaft, but smaller than the outer threads themselves.
    • If the hole is too wide, the thread of the screw won't have anything to grab onto.
    • The pilot hole should be slightly deeper than the length of the hook screw's threaded shaft.
  5. Gently twist it clockwise; as it gets deeper, you will have to apply firmer pressure.
    • If you have trouble twisting it through the last few rotations, grasp the hook gently with pliers and use the pliers to gain added torque.
    • Stop twisting once the base of the hook is flush with the ceiling. If you twist past this point, you could break the hook.
    6. Advertisement
Method 2
Method 2 of 2:

Hanging a Hook From Drywall

PDF download Download Article
  1. If you must hang your ceiling hook in a location where there is no joist, use a toggle bolt, also known as a toggle "anchor," with a hook. [6] A toggle anchor with a hook consists of a bolt threaded through the center of two spring-loaded wings; a hook is attached to the end of the bolt instead of a standard bolt head.
    • Never use a plastic anchor to hang something from a ceiling. Plastic anchors are meant to be used for lighter loads against a vertical wall. [7]
    • Measure the thickness of the drywall and the weight of the item you want to hang; then consult a chart of load capacities to determine what size toggle bolt you should be using.
    • A toggle bolt cannot be screwed into a wooden joist, so make sure you're drilling into a hollow area.
    • If you're hanging a lamp, make sure your hole is close to a power outlet that you easily can plug it into.
  3. The packaging on your toggle bolt should specify how big the hole should be - usually around half an inch.
    • If the packaging doesn't indicate the size, measure the base of the toggle when it's closed to determine how big of a hole to drill.
    • If you're using an especially large toggle bolt, use a paddle bit to drill the hole. A paddle bit is designed to drill larger holes.
  4. When they reach the hollow space, the wings will open. Tightening the bolt will screw the wings down until they are secure against the inner surface of the ceiling.
    5. Advertisement


Expert Q&A

Search
Add New Question
  • Question
    How do you attach a hook to a ceiling?
    Gino Colucci
    Home Improvement Specialist
    Gino Colucci is a Home Improvement Specialist and the Owner of Crackerjacks Handyman Services (not a licensed contractor) in Chandler, Arizona. Crackerjacks Handyman Services offers an effective cost-saving solution for commercial and residential repair and maintenance needs, specializing in smaller projects. Crackerjacks Handyman Services carries liability insurance and all technicians go through a background check.
    Gino Colucci
    Home Improvement Specialist
    Expert Answer
    Ideally, you want to anchor into a stud, truss, or joist. Use a stud finder or earth magnets (to find screw locations) to locate a joist or truss. Also, make sure to pre-drill first. If you can't pre-drill, use a toggle bolt. Do not use standard plastic anchors.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 3
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You'll Need

      • Ladder
      • Hook screws (for joists)
      • Toggle bolt with hook (for drywall)
      • Stud finder
      • Pencil
      • Electric drill
      • Pliers

      Tips

      • Wear safety goggles to avoid ceiling particles getting into your eyes.
        Thanks
        Helpful 35 Not Helpful 15
      • Lay down plastic, tarp, or a sheet underneath the area where you'll be drilling to keep your floor clean of debris.
        Thanks
        Helpful 3 Not Helpful 0
      • If you don't have a stud finder, you could use a magnet to find nails in the ceiling joists.
        Thanks
        Helpful 3 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Install a Drop Ceiling
      How to
      Install Ceiling Drywall
      How to
      Fix Holes in a Ceiling
      How to
      Hang Lights from a Ceiling
      How to
      Fix Ceiling Cracks
      How to
      Soundproof a Wall or Ceiling
      How to
      Cut and Fit Coving Molding
      How to
      Hang Heavy Objects from the Ceiling
      How to
      Fix a Leaking Ceiling
      How to
      Raise a Ceiling
      How to
      Texture a Ceiling
      How to
      Popcorn Your Ceiling
      How to
      Insulate a Drop Ceiling
      How to
      Wrap Beams
      Advertisement

      References

      1. ↑ 1.0 1.1 https://homeguides.sfgate.com/hang-decorative-object-ceiling-38876.html
      2. ↑ Gino Colucci. Home Improvement Specialist. Expert Interview. 7 January 2021.
      3. ↑ Gino Colucci. Home Improvement Specialist. Expert Interview. 7 January 2021.
      4. ↑ https://www.weekand.com/home-garden/article/ceiling-joist-18056989.php
      5. ↑ Gino Colucci. Home Improvement Specialist. Expert Interview. 7 January 2021.
      6. ↑ Gino Colucci. Home Improvement Specialist. Expert Interview. 7 January 2021.
      7. ↑ Gino Colucci. Home Improvement Specialist. Expert Interview. 7 January 2021.

      About This Article

      Article Summary X

      If you want to hang a hook from a ceiling, buy the right size of hook depending on the weight of the item you want to hang from it. When you get home, locate a joist by knocking on the ceiling until you hear a short, firm sound rather than a hollow sound. Then, bore a hole with a drill bit that is the same size as the screw on your hook, but smaller than its outer threads. Finally, place the tip of the hook into the hole and turn it clockwise until it’s firmly in place. For tips on how to hang a hook from a drywall ceiling, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 780,842 times.

      Reader Success Stories

      • Autumn Montgomery

        May 23, 2017

        "I like how straightforward the directions are, and the included images work with those directions to give concise ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement