How to Hang a Mirror with Wire

PDF download Download Article
PDF download Download Article

You have a beautiful mirror you want to hang up on the wall, but there's one problem: it's heavy. Like really heavy. Fortunately, it's totally possible to hang a heavy mirror with wire so it's secure and safe. Check out the steps below to learn what kind of hardware you should use, how to find a secure spot on your wall, and how to hang your mirror so it's safe and sound.

Part 1
Part 1 of 4:

Attaching Wire to Your Mirror

PDF download Download Article
  1. Flip your mirror over so the backside is facing up. Then put felt pads on the bottom corners. These pads will prevent the frame from scraping against your wall, and will help air circulate between it and the wall. [1]
    • You can find these felt pads at most large retailers that sell home supply goods.
  2. D-rings are a better option than eye screws because they will lie flat against the back of your mirror’s frame. This will allow your mirror to hang up right against the surface of the wall.
    • D-rings come in different sizes, so you’ll want to make sure that you choose D-rings that can bear the weight of your mirror.
    • You can buy D-rings at any home improvement store.
    Advertisement
  3. First, use a tape measure to measure the length of the mirror. Then measure a third of this distance from the top of the mirror. Mark this point in the middle of each side. This will be where you will attach the D-rings. [2]
  4. Screw 1 D-ring into each side where you made a mark in the previous step. You should screw them in so that the eye of the D-ring is on top.
  5. Hanging wire designed to hang picture frames and mirrors to a wall is the best type of wire to hang your mirror. Floral wire, electrical wire, string, and other type of wire are not as secure and can fail.
    • Your wire should be around 10 centimetres (3.9 in) longer than the width of your mirror’s frame.
  6. Once you’ve screwed in D-rings to the back of your mirror’s frame, run the hanging wire through the two rings. Then tightly secure the ends of the wire to the D-rings.
    • Make sure the wire is taut when you pull on it.
    • When you pull on it, the wire should also not rise above the top of the frame.
    7. Advertisement
Part 2
Part 2 of 4:

Positioning Your Mirror

PDF download Download Article
  1. If you live in a house that was built in the 1940s or before, your walls are probably made of plaster and lath. If your house was built more recently, however, your walls are likely made of drywall. It is important to find out what your wall is made of before you hang your mirror because using a drywall hanger on plaster can damage a plaster and lath wall’s surface.
    • Plaster and lath is harder, thicker, and more brittle than drywall.
    • If you’re unsure what type of wall you have, try to push a pushpin into the wall. A pushpin will go right into drywall but not plaster. [3]
  2. All fasteners have a maximum weight rating. Some fasteners are designed to hold heavy mirrors and picture frames and some are not. You can use a bathroom scale to weigh your mirror.
    • If you’re using a bathroom scale, weigh yourself first and then weigh yourself as you’re holding the mirror. The difference will be the weight of your mirror.
  3. If you’re hanging a heavier mirror, you’ll want to find a stud in your wall to support it. If you have a wall made of drywall, you can use a stud finder to locate a stud in your wall. A stud finder, however, won’t work for a plaster and lath wall. To find a stud behind a plaster and lath wall, tie some string around a strong magnet. Then, holding the top end of the string, slowly move the magnet horizontally across the wall. The magnet should stick to the wall when it moves across a stud. [4]
    • The magnet you use will have to be strong, so simple magnets from your refrigerator probably won’t work.
    • If you can't hang the mirror from a stud, drill pilot holes and install anchors in the wall. [5]
  4. Lift your mirror up on your wall where you want it to hang. Then, use a pencil to make a short line where the center of the top edge of the mirror is on the wall. [6]
    • If you’re hanging a heavier mirror, have someone help you get the mirror into position.
  5. Many different fasteners exist, and they all have different maximum weight ratings, or the maximum weight they can hold up. These include screw-in drywall anchors, expanding plastic sleeves, picture frame hangers and nails, tap-in expanding anchors, toggle bolts, and anchor wire (monkey hooks). [7]
    • Hardware weight limits should be listed on the packages they come in. [8]
  6. When hanging a mirror with wire, it is a good idea to use two fasteners instead of just one. Using two will prevent your mirror from moving in place and becoming lopsided.
    • Using two fasteners will also reduce the likelihood that your mirror will fall.
  7. 7
    Measure down from the top of the frame before installing the fasteners. Hold the mirror up by the center of the wire. Then, measure down from the top of the mirror to the highest point of the wire. Use your tape measure to measure down that exact same length from the mark you made on the wall. This will be the height your fasteners need to go—make another mark here. [9]
    • Measure out horizontally from the second mark to make sure your fasteners are evenly spaced.
  8. Take a small piece of wood approximately 12 inches (30 cm) long and mark its center. Center it under the top of the mirror and hold it up tight under the wire until the wire is taut. Use a tape measure to measure the distance from the top of the mirror to the top of the piece of wood. Then measure that same distance down from the mark you made on the wall and make a mark.
    • This second mark indicates the future position of your hanging wire.
  9. Now, take the piece of wood and align its center with the second mark you made on the wall. Use a torpedo level to make sure the piece of wood is level. Then, use a pencil and mark on the wall the location of the upper right- and left-hand corners of the piece of wood.
    • These marks will be where you put in your hooks.
    10. Advertisement
Part 3
Part 3 of 4:

Hanging a Mirror on Drywall

PDF download Download Article
  1. If you’re hanging your mirror on drywall, using picture hanger hooks and small nails is probably the best option. Picture hangers will hold up most light to medium mirrors, and they are also easy to install and remove.
    • Picture hangers come in a variety of sizes and have different weight limits, so make sure the weight limit listed on the hardware packaging is higher than the weight of your mirror.
  2. Once you’ve marked where you want your hooks to hold up the wire, simply use a hammer and nail to tap in a picture hanger on each corner mark. Tap the nail gently so that you don’t accidentally damage your wall.
    • Once you’ve tapped in your two picture hangers, step back and make sure they look level from a distance.
  3. These specialty types of hardware can bear a lot more weight than a standard picture hanger. There are a lot of different models and brands, so take care in choosing one that is appropriate for your mirror and wall.
    • If you’re working with a very heavy mirror, you must screw it directly into a wall stud.
    4. Advertisement
Part 4
Part 4 of 4:

Working with a Plaster Wall

PDF download Download Article
  1. A toggle bolt has a spring-loaded nut that squeezes through a hole in the front of your wall and then springs open on the other side of the wall when you push it through the hole. It will allow you to hang a mirror or picture frame on your plaster wall without damaging the wall’s surface.
  2. Use an electric drill to drill holes through the plaster. These holes will need to be wide enough for the toggle bolt to fit through.
  3. Once you’ve drilled holes into your wall, screw your toggle bolt nut onto a machine screw.
  4. Once the bolt’s through, pull it back to make sure the spring has opened. Then, tighten it against the wall with a screwdriver.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you hang a heavy mirror?
    David Julien
    DIY Specialist
    David Julien is a DIY Specialist and the Principal Owner at Nice DIY based in Quebec, Canada. David specializes in creating plans to make unique, affordable, and modern home furnishings. He holds a BA in Graphic Design from the University of Quebec Outaouais. Nice DIY uses sustainable and high-quality materials to create products that are simple to make for everyone.
    David Julien
    DIY Specialist
    Expert Answer
    If you're hanging a heavy mirror, be sure to nail it into a wall stud or use gypsum anchors.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Get Suction Cups to Stick
      How to
      Hang Sawtooth Picture Hangers
      14 Ways to Hang or Stick Things on Walls Without Damage
      How to
      Hang Decorations from a Ceiling
      How to
      Hang the American Flag on a Wall
      How to
      Hang a Whiteboard
      How to
      Hang an American Flag Vertically
      How to
      Hang Things on Plaster Walls
      The Best Way to Hang a Dartboard
      How to
      Hang a Heavy Mirror
      The Best Way to Hang a Frameless Mirror With a Flat Back
      How to
      Hang Heavy Objects from the Ceiling
      How to
      Hang a Poster Without a Frame
      How to
      Hang a Radiator
      Advertisement

      References

      1. ↑ https://www.theguardian.com/lifeandstyle/2014/oct/12/how-to-hang-a-picture
      2. ↑ https://www.theguardian.com/lifeandstyle/2014/oct/12/how-to-hang-a-picture
      3. ↑ https://www.popularmechanics.com/home/interior-projects/g15857034/how-to-hang-things-on-the-wall/
      4. ↑ https://thecraftsmanblog.com/how-to-find-studs-in-a-plaster-wall/
      5. ↑ David Julien. DIY Specialist. Expert Interview. 20 January 2021.
      6. ↑ David Julien. DIY Specialist. Expert Interview. 20 January 2021.
      7. ↑ https://www.rent.com/blog/wall-hanging-without-stud/
      8. ↑ https://www.lowes.com/n/how-to/how-to-hang-heavy-mirrors
      9. ↑ David Julien. DIY Specialist. Expert Interview. 20 January 2021.

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 127,797 times.

      Reader Success Stories

      • Arlene Shearer

        Sep 17, 2019

        "My dad did all my DIY for me, but he's not here now, so I try to do things myself rather than ask anyone. Your ..." more
      Share your story

      Did this article help you?

      Advertisement