3 Easy Ways to Hang a Mirror on the Wall

PDF download Download Article
Put up a mirror and brighten your space with these DIY tips
PDF download Download Article

Do you want to hang up a mirror but are a little worried about it falling down and breaking? Mounting a mirror is a great way to make your space look larger, and they’re easy to hang up no matter their size or location. The hardware you use for your mirror varies on what your wall is made of and if your mirror has a frame, but we’ll walk you through every step. Keep reading to learn how to use clips, wires, cleats, and adhesives to support your mirror and keep it hung up for years to come.

Method 1
Method 1 of 4:

Prepping Your Wall and Mirror

PDF download Download Article
  1. Most walls are made from either drywall, plaster, or masonry. If you have concrete, brick, or tile walls, then they’re made of masonry. If you’re trying to tell the difference between plaster and drywall, stick a push pin into your wall. The pin will easily push into a drywall surface but it’ll take a lot of force to push the pin through plaster. [1]
    • Different wall surfaces require specific hardware or anchors to ensure your mirror doesn’t fall or break. If you use hangers designed for a different material, then they could also damage your walls.
  2. Hold your mirror up to the wall to see how much space it will take up. Try to find a place that’s about 60–65 inches (150–170 cm) above the floor so your mirror is at eye level. Once you find a good place, ask a friend to mark the edges or corners of your mirror on the wall using a pencil or some painters tape. [2]
    • Check your marks with a level to ensure your mirror hangs straight. If they’re out of line, then adjust the level against your wall until the bubble is in the center of the tube and redraw your marks.
    • If your mirror is too large to hold up easily and mark at the same time, measure it with some measuring tape or a yardstick, and see how those dimensions fit on your wall.
    EXPERT TIP

    Peter Salerno

    Installation Expert
    Peter Salerno is the owner of Hook it Up Installation, a professional installation company, which has been hanging art and other objects around Chicago, Illinois for over 10 years. Peter also has over 20 years of experience installing art and other mountable objects in residential, commercial, healthcare and hospitality contexts.
    Peter Salerno
    Installation Expert

    Expert Trick: If you're hanging a full-length mirror vertically, the best place to put it is 8–12 inches (20–30 cm) off the floor. At this height, you'll be able to see your reflection from head to feet.

    Advertisement
  3. Check drywall and plaster walls for studs using a stud finder . Turn on your stud finder and run it against the wall where you want to install your mirror. When you locate a stud and the finder beeps, use a pencil to mark the location on your wall. If possible, mount your mirror on a stud so it’s the most secure on your wall. [3]
    • If there isn’t a stud right where you want to hang the mirror, that’s okay. You’ll still be able to hang your mirror there, and you’ll just need some extra wall anchors for added support.
  4. Add angle brackets to the mirror's frame if it doesn’t have hardware. Check the back of your mirror to see if it has any pre-installed mounting hardware. If it does, then your mirror is already made to be hung up and has a sturdy frame. If you’re putting an old mirror on the wall and it doesn’t have hardware, then the frame might not support its weight. Place L-shaped angle brackets in each corner of the frame and screw them into the back of your mirror to hold it together. [4]
    • Check your mirror’s warranty if you still have it. Some mirrors are specifically designed to be leaned up against a wall, so if it breaks when you try to hang it, the manufacturer's warranty will not cover the damage. [5]
    • If you’re hanging a frameless mirror , don’t worry about adding any angle brackets.
  5. Ask a friend to help you lift the mirror and set the edge down on top of your scale. Let go of the mirror and let it lean against you as you read the weight on the scale.
    • Hangers and wall fasteners have specific weight limits, so knowing how heavy your mirror is helps you choose the correct hardware.
    6. Advertisement
Method 2
Method 2 of 4:

Hanging Mirrors with D-Rings or Wire

PDF download Download Article
  1. Your mirror will already have D-rings, which are small metal D-shaped hangers, or it will have picture wire. To hang a mirror with picture wire , pull the center of the wire up until it’s taut. Then, measure the distance from the top of the wire to the frame. [6] If you have D-rings, measure how far apart your fasteners are from one another, and how far they are from the top of the mirror. Transfer the measurements to your markings on the wall so you know where to put the hanger. [7]
    • If you want to be able to make slight adjustments to your mirror’s position after you hang it with picture wire, pull the wire up in 2 places about 12 inches (30 cm) apart. Measure how far the points are from the top and sides of the frame.
  2. If you’re mounting your mirror directly to a stud, attach the wall hooks 2 1 ⁄ 2  in (6.4 cm) wood screws for drywall and 3 in (7.6 cm) screws for plaster walls. If there isn’t a stud or if you have masonry walls, pre-drill holes in your wall and insert wall anchors that are specifically made for the material. Then, just screw the hook directly into the anchor. [8]
    • Use wall hooks that have a weight limit that’s higher than the weight of your mirror.
    • Toggle bolts are a great alternative to wall anchors if you have drywall or plaster. Make a hole large enough for the end of the bolt to fit through. Push the end of the bolt through the hole so the wings open up. Then, just tighten the bolt against the wall to secure it.
    • If you have masonry walls, be sure to use a masonry bit on your drill since wood bits will get dull or damaged.
  3. Put rubber bumpers on the back corners of your mirror. Peel a rubber bumper off of the adhesive backing and press it down firmly in the corner of your mirror. These little pieces will help prevent your mirror from tilting or leaving marks on the wall. [9]
  4. Line up your rings or wire with the hooks on your wall, and hang the mirror. If your mirror is too heavy or large for you to lift easily, ask a friend or family member to help out. Once you have the mirror hung up, take a step back to check that the mirror is straight. If you need to make any adjustments, carefully reposition the mirror before checking how it looks again. [10]
  5. Clean off your mirror with glass cleaner. Now that your mirror is in place, polish or wipe down the surface with a soft microfiber cloth and some glass cleaner so it’s streak-free and reflective.. [11]
    6. Advertisement
Method 3
Method 3 of 4:

Using French Cleats

PDF download Download Article
  1. Screw your cleats onto the mirror frame if they’re not already attached. French cleats have a bottom half that attaches to the wall and a top half that attaches to your mirror. If your mirror doesn’t already have the cleats pre-installed, position the mirror-side of the cleats with the downward-facing hooks along the top edge of the mirror. Use screws that are shorter than the frame’s thickness to attach the cleats. [12]
    • Use French cleats that have a weight limit higher than the weight of your mirror. You may only need one cleat for smaller mirrors, or 2–3 if you’re hanging a heavy mirror .
  2. Measure the distance from the sides of the frame to your cleats, and transfer the measurement onto your wall. Use a level to ensure your marks line up. Once you have them level, position the wall-side of the cleats with upward-facing hooks on your wall to mark the screw holes. Pre-drill holes that are a size smaller than your screws to avoid wall damage. Then, hold your cleats against the wall and screw them in. [13]
    • If you’re screwing into a stud, then use 2 1 ⁄ 2  in (6.4 cm) wood screws for drywall and 3 in (7.6 cm) screws for plaster.
    • If you’re attaching the cleat through drywall or plaster without a stud, put a wall anchor or toggle bolt into the hole first. Then attach your cleat with the provided screws.
    • If you are hanging the mirror on a brick or concrete wall, install a masonry wall anchor in the hole before putting screws in.
  3. Have a helper assist you when you lift your mirror so it’s easier to maneuver. Line up the cleats on the back of the mirror with the ones on the wall, and slowly lower your mirror down onto them. [14]
    • Push the mirror slightly to the left or right to slightly adjust its position. Just be sure not to slide the mirror off of the cleats.
    • After you hang your mirror, wipe it off with glass cleaner to get rid of any fingerprints or streaks. [15]
    4. Advertisement
Method 4
Method 4 of 4:

Hanging Frameless Mirrors with Adhesive

PDF download Download Article
  1. Wet a clean cloth with warm water and run it over your wall where you plan on hanging the mirror. Keep wiping the surface until you don’t see anymore dirt or dust lift up. [16]
    • If you don’t wipe your wall off, then the adhesive you used won’t make a good connection.
  2. Get a 2 in × 4 in (5.1 cm × 10.2 cm) board that’s the same length or slightly longer than your mirror. Screw the support into your wall every 8–12 inches (200–300 mm) so it doesn’t move around or shift once you set the mirror on top of it. [17]
    • Because the adhesive needs time to cure, the temporary support holds your mirror in place so it doesn’t fall down.
    • If the bottom of the mirror is against the top of a vanity, then you don’t need to use a support board.
  3. Apply adhesive or mirror tape on the back of your mirror. Use an adhesive glue or tape that’s specifically made for mirrors to ensure it doesn’t fall down. Place the adhesive in vertical strips every 2–3 inches (5.1–7.6 cm) along the length of the mirror. [18] If you’re using adhesive tape, apply about 12 inches (30 cm) for every 4 1 ⁄ 2 pounds (2.0 kg) that your mirror weighs. [19]
    • Use adhesive or tape that matches the weight of your mirror. Since adhesives are the weakest hanging product, only use them with lightweight mirrors instead of large, heavy ones.
    • Avoid placing adhesive horizontally since condensation could get trapped behind your mirror and cause water damage to your walls.
  4. Ask a friend to help you lift your mirror, especially if it’s large or heavy. Line up the mirror with the marks you made on your wall and slowly press the mirror against it. Hold the mirror in place according to the instructions on the adhesive, which should take about a minute or two. After that, let go of the mirror so the bottom is resting on the support board. [20]
    • Make sure the mirror is exactly where you want it since it will be very difficult to remove and replace after the adhesive dries.
  5. Even if the adhesive looks dry within a few minutes, it needs time to fully harden and cure. While it usually takes 1–2 days, leave the support board attached to your wall for the cure time listed on the adhesive’s packaging. After that, use a screwdriver to remove the board. [21]
    • Clean off your mirror with glass cleaner and a soft microfiber cloth after it’s fully installed. [22]
    • After you take off the support board, repair the holes in your wall using some spackle .
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I hang a heavy mirror on sheet rock?
    Community Answer
    Use a long threaded wood or drywall screw, something with grip. Avoid mollies, as they seem to wear out rather quickly and one can be left with a 1/4" or larger hole in the wall.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 6
  • Question
    What height from the floor should I hang a picture?
    Community Answer
    Hanging a picture is different from hanging a mirror. You don't have to be concerned with the viewing area. Just hang it at eye level or wherever you feel that it adds to your room.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 1
  • Question
    Can I hang a mirror weighing 10 lbs on a sheetrock wall using a regular picture hanger shaped like a "j" if the nail is on an angle?
    Community Answer
    Yes, that should have no problem holding the mirror. There are also very similar hangers that have 2 nails on top, in case you've underestimated the weight or notice the single nail hanger straightening the nail angle or bending the nail down.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 4
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Experiment with different styles and sizes of wall mirrors throughout your home to freshen up your décor.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Avoid hanging a heavy mirror on a small nail or hook. Over time, the weight can put tension on the wall. This can lead to your mirror falling and breaking, and part of the wall being destroyed as well. [23]
        Thanks
        Helpful 0 Not Helpful 0
      • Try to avoid mounting a mirror over your bed, couch, or chairs so it doesn’t fall on you if it ever falls down. [24]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Hang a Heavy Mirror
      How to
      Get Suction Cups to Stick
      How to
      Hang Sawtooth Picture Hangers
      14 Ways to Hang or Stick Things on Walls Without Damage
      How to
      Hang Decorations from a Ceiling
      How to
      Hang the American Flag on a Wall
      How to
      Hang a Whiteboard
      How to
      Hang an American Flag Vertically
      How to
      Hang Things on Plaster Walls
      How to
      Hang a Mirror with Wire
      The Best Way to Hang a Dartboard
      The Best Way to Hang a Frameless Mirror With a Flat Back
      How to
      Hang Heavy Objects from the Ceiling
      How to
      Hang a Poster Without a Frame
      Advertisement

      References

      1. ↑ https://youtu.be/LnZm1cMklMM?t=16
      2. ↑ https://images.thdstatic.com/catalog/pdfImages/3a/3a7c93a3-4059-45f1-9231-bccb45b74129.pdf
      3. ↑ https://assets.weimgs.com/weimgs/rk/images/i/202306/0041/images/pdf/assembly-instructions/english/frameless_asymmetrical_wall_mirror.pdf
      4. ↑ https://youtu.be/l4mN-hfvUHA?t=326
      5. ↑ http://www.elledecor.com/home-remodeling-renovating/home-renovation/advice/a6730/how-to-hang-a-mirror/
      6. ↑ https://youtu.be/LnZm1cMklMM?t=139
      7. ↑ https://youtu.be/PAZsaj3aIqo?t=120
      8. ↑ https://www.bobvila.com/articles/how-to-hang-a-heavy-mirror/
      9. ↑ https://www.glassdecorer.com/how-to-hang-a-heavy-mirror-on-wall/
      1. ↑ https://images.thdstatic.com/catalog/pdfImages/3a/3a7c93a3-4059-45f1-9231-bccb45b74129.pdf
      2. ↑ https://www.goodhousekeeping.com/uk/house-and-home/household-advice/a35244651/how-to-clean-a-mirror/
      3. ↑ https://youtu.be/qpLCIT0GeIw?t=348
      4. ↑ https://assets.weimgs.com/weimgs/rk/images/i/202306/0041/images/pdf/assembly-instructions/english/frameless_asymmetrical_wall_mirror.pdf
      5. ↑ https://youtu.be/qpLCIT0GeIw?t=480
      6. ↑ https://www.bobvila.com/articles/how-to-clean-a-mirror/
      7. ↑ https://youtu.be/GjYAd0-Tz44?t=32
      8. ↑ https://youtu.be/CuGK10GWweI?t=29
      9. ↑ https://pimpointstorageprod.blob.core.windows.net/pimpointprod/manuals-and-documents/710443_.pdf
      10. ↑ https://multimedia.3m.com/mws/media/1160619O/mirror-mounting-tape-product-info-sheet-europe-april-2013.pdf
      11. ↑ https://youtu.be/GjYAd0-Tz44?t=67
      12. ↑ https://glasspartsie.ecom-store.com/image//Product_Files/product_documents/data_sheets/SOUDAL%20DATS%20SHEETS/N.SOU.MIR.pdf
      13. ↑ https://www.bobvila.com/articles/how-to-clean-a-mirror/
      14. ↑ https://www.fema.gov/sites/default/files/2020-07/how2015_pictures_mirrors.pdf
      15. ↑ https://www.fema.gov/sites/default/files/2020-07/how2015_pictures_mirrors.pdf

      About This Article

      Article Summary X

      To hang a wall mirror, start by weighing the mirror using a bathroom scale. Then, buy some hanging hooks that are strong enough to support that weight. Once you have hanging hooks, mark where you want to hang the mirror on the wall and drill a hole for the hook. If you're not hanging the mirror on a stud, you may want to insert a wall anchor with the hook for extra support. Finally, hang the mirror on the hook and adjust it so it's straight. To learn how to hang a wall mirror with cleats or adhesive, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 406,327 times.

      Reader Success Stories

      • Anonymous

        Jul 23, 2017

        "Was interesting to read ALL the methods for hanging a mirror. I now feel confident enough to hang my mirror myself ..." more
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement