How to Hide Cables on the Wall

PDF download Download Article
PDF download Download Article

Cables on the wall can be an eyesore, especially if you prefer a streamlined look for your home. If you own your own home, you can install cable plates by cutting a hole in the drywall and feeding cords through that hole. However, if you're renting, there are less dramatic solutions. Decorating tricks can conceal the blinds and you can also hide them in drawers or under tables and chairs. With a little creativity, you should be able to conceal cords in your home.

Method 1
Method 1 of 3:

Installing Cable Covers

PDF download Download Article
  1. Start measuring where the cords are visible on the wall. They usually fall off the edge of the device they're attached to. Measure from the edge of the device to the outlet. [1]
  2. You can buy cable covers at most hardware stores. Remove your cover from the packaging and, if necessary, use a handheld saw to cut it down to the proper size. [2]
    • If the cover is too small rather than too big, you may have to use multiple covers.
    Advertisement
  3. Use a level and a pencil to draw a line on your wall. The line should run from the edge of the device, where the cords are visible, to the outlet. [3]
  4. The cable cover has two parts: a base and a cover. The base should be marked and will also have small holes running along either side where you apply screws. Use one hand to hold the base of the cable cover against the wall, following in the direction of the line you drew. Use a screwdriver to attach the screws to each hole in the cover. [4]
    • The screws you need should come with your cable cover kit.
  5. Place all the cords inside the base. Then, place the cable cover over the base. Push down lightly with your hands to snap the cover in place. [5]
  6. [6] If the cable cover clashes with your wall color, you can paint it to match. You can also paint it in a similar color to your wallpaper to make it look more aesthetically suited for your home. [7]
    7. Advertisement
Method 2
Method 2 of 3:

Concealing the Cables with Decorating Tricks

PDF download Download Article
  1. Place a decorative box on a shelf just under the cables. Gather the cables together and close the box to hide them. You can also cut a small hole in either side of the box and feed the cables through this hole to the wall outlet to conceal them. [8]
  2. If you don't have room for a buffet or table near the cables, use some pictures or paintings. Take some pictures or paintings and hang them over the cords to hide them. [9]
    • If cords get very hot, this could be a fire hazard. Avoid using pictures for cords attached to powerful devices, such as air conditioners.
  3. Cables often stem from a television set. You can buy frames meant to be fitted around a TV at a local craft or department store. If you place the frame around the TV and then feed the cables behind the TV stand, this can help hide some of the cables. [10]
  4. Place an end table or buffet underneath the cables on the wall. Place things like books, vases, figurines, plants, and other decorative devices in front of the cables. This helps hide the cables with some cute decorations. [11]
  5. If you can't easily hide your cables, use the cables themselves for decorating. Work the cables into an interesting shape or design and then secure them in place with tape. For example, you can make the shape of a building with your cables and then tape the shape in place. [12]
    • A strong type of tape, like packaging tape, works best.
    6. Advertisement
Method 3
Method 3 of 3:

Using Cable Plates

PDF download Download Article
  1. Cables on the wall are often attached to a device like a television or stereo. Check behind this device to see where the cables stem out from the back. Mark a spot on the wall level to the cables. [13]
    • Once you've marked the spot, you need access to the wall. Push back the device, like the television or stereo, that's attached to your cords so you can easily work on the wall.
    • If you're renting, make sure to check with the landlord to make sure it's okay to cut into the wall.
  2. Run a stud finder along the wall on the spot you marked. You want to make sure there are no studs before cutting into the drywall. If you find studs on the space you marked, it's okay to install the cable plate a little to the left or right as long as the cords can stretch this far. [14]
  3. Remove the cable plate from its packaging and press it against the wall where you want to install it. Use a pencil to trace the outline of the cable plate. [15]
  4. Trace the outline you made gently with the knife. Then, once you've traced the outline, gently press into the drywall until you detach the rectangle shape from the wall. [16]
    • Make sure to push the blade away from your hands to avoid getting cut.
    • If the dry wall doesn't pop out when pressed, trace the outline with an x-acto knife again.
  5. Make sure the opening of the cable plate is facing downwards, as you'll be feeding the wires down through the wall. There should be two small flaps on the side of the cable plate that can be manually pushed up and down. Push the flaps inward so they're tucked into the side of the plate. Then, fit the plate into the rectangle hole you cut in the wall. Push the plate into the hole with your hands until only the edges of the plate stick out. [17]
  6. Once the cable plate is in the wall, take a screwdriver. Use the screwdriver to screw in the screws on either side of the plate. This causes the flaps on either side of the plate to extend outward, pressing against the inside of the drywall to hold the plate in place. [18]
  7. Repeat the exact same process to cut a second hole in the wall, near the electric outlet where you normally plug in the cords. Trace the outline of the cable plate, check for studs, and then cut out a hole in the drywall. [19]
  8. Take all cords attached to your device. Feed them through the top cable plate until they reach the second hole. Pull the cords out from the hole. [20]
    • If your cords detach from the device, detach them for this part of the process. If they don't detach, move the device close enough to the wall that you can feed the cords through.
  9. Move your second cable plate near the wall. Feed all the cords through the opening in this plate. [21]
  10. Once the cords are fed through the opening, insert the second cable plate. Do this exactly as you did before. Push the cable plate into the wall and then screw it in place. You can now plug in your device and push it back against the walls. As the cables are running through the drywall, they should be completely concealed. [22]
    11. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How can I hide my TV cords without cutting the wall?
    Christopher Lanier
    Handyman
    Christopher Lanier is a Handyman and the former Owner and operator of Watson & Company Handiworks, a handyman business in Austin, Texas. For nearly 5 years Christopher specialized in outdoor light installation, furniture assembly, TV mounting, and window treatment installation. Before closing in 2021 Watson & Company Handiworks was rated as a Top Pro by Thumbtack. Christopher holds a Bachelor’s degree in Business Administration from the University of Texas at Austin. He currently works as an inventory manager at Grocery TV, the largest digital advertising network in the U.S. grocery industry.
    Christopher Lanier
    Handyman
    Expert Answer
    I recommend using a wire track and painting it match the wall or surrounding area.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Wrap Cables
      How to
      Terminate Coaxial Cable
      How to
      Run a Cable Under Carpet
      How to
      Organize Desk Cables
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=FIDpH9UfA64&feature=youtu.be&t=30
      2. ↑ https://www.youtube.com/watch?v=FIDpH9UfA64&feature=youtu.be&t=33
      3. ↑ https://www.youtube.com/watch?v=FIDpH9UfA64&feature=youtu.be&t=43
      4. ↑ https://www.youtube.com/watch?v=FIDpH9UfA64&feature=youtu.be&t=63
      5. ↑ https://www.youtube.com/watch?v=FIDpH9UfA64&feature=youtu.be&t=63
      6. ↑ Christopher Lanier. Handyman. Expert Interview. 25 August 2020.
      7. ↑ https://www.youtube.com/watch?v=FIDpH9UfA64&feature=youtu.be&t=73
      8. ↑ http://www.homedit.com/ingenious-ways-hide-things-plain-sight/
      9. ↑ https://www.remodelaholic.com/ways-to-hide-decorate-around-tv-electronics-cords/4/
      1. ↑ https://www.remodelaholic.com/ways-to-hide-decorate-around-tv-electronics-cords/4/
      2. ↑ https://www.remodelaholic.com/ways-to-hide-decorate-around-tv-electronics-cords/4/
      3. ↑ http://www.homedit.com/ingenious-ways-hide-things-plain-sight/cords-wall-art-design/
      4. ↑ http://www.popularmechanics.com/home/how-to-plans/how-to/a18787/how-to-hide-tv-wires/
      5. ↑ http://www.popularmechanics.com/home/how-to-plans/how-to/a18787/how-to-hide-tv-wires/
      6. ↑ http://www.popularmechanics.com/home/how-to-plans/how-to/a18787/how-to-hide-tv-wires/
      7. ↑ http://www.popularmechanics.com/home/how-to-plans/how-to/a18787/how-to-hide-tv-wires/
      8. ↑ http://www.popularmechanics.com/home/how-to-plans/how-to/a18787/how-to-hide-tv-wires/
      9. ↑ http://www.popularmechanics.com/home/how-to-plans/how-to/a18787/how-to-hide-tv-wires/
      10. ↑ http://www.popularmechanics.com/home/how-to-plans/how-to/a18787/how-to-hide-tv-wires/
      11. ↑ http://www.popularmechanics.com/home/how-to-plans/how-to/a18787/how-to-hide-tv-wires/
      12. ↑ http://www.popularmechanics.com/home/how-to-plans/how-to/a18787/how-to-hide-tv-wires/
      13. ↑ http://www.popularmechanics.com/home/how-to-plans/how-to/a18787/how-to-hide-tv-wires/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 62,373 times.

      Is this article up to date?

      Advertisement