How to Identify a Ford Motor

PDF download Download Article
PDF download Download Article

The Ford Motor Company has put identification number tags on some of its motors since the mid-1950s and on all of its motors since January 1964. These tags tell you the month and year of production, the model year, the change level number, and the CID (cubic inch displacement). In the event that you cannot find the tags, you can also use a casting number to obtain certain information.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Method 1
Method 1 of 2:

Using the Identification Tag

PDF download Download Article
  1. Valve cover bolts are the big bolts on the top of the engine, holding down the plate (usually marked "Ford") on top of the valves. The number of bolts corresponds to your engine type, which will help you locate the more useful ID tag.
    • 2 bolts: 239/256/272/292/312
    • 5 bolts: 332/352/360/361/390/391/406/410/427/428
    • 6 bolts: 221/260/289/302/351W
    • 7 bolts: 429/460
    • 8 bolts: 351C/351M/400
  2. The tag is a series of numbers and letters etched in and used to decipher the year, make, and model of you engine. It is found underneath the bolts on the left or right side of the engine, near the front of the car. You can find the tag here on all six-cylinder engines made after 1964, and on some V8 engines. [1]
    • The tag is roughly three inches long, half an inch wide, and made of aluminum.
    • If you are unsure what kind of engine you have, think back to the valve cover bolts as you work through the following steps. This will help you narrow down your options.
    Advertisement
  3. Check under the dipstick, which is the small, plastic-handled piece that lets you check your oil.
  4. These are the last few places the tag might be. If it is not there, it may have been removed, fallen off, or only be visible when the engine is not in the car. Depending on where you find the tag, you can learn something about the engine: [2]
    • Indicator Bulb: 360, 330, 391 engines.
    • Dipstick Tube: 352 engines.
    • Carburetor Stud: 401, 477 534 engines. [3]
  5. Once you've found the identification tag, you need to know how to read it to get the right information. Luckily, the tags are simple to breakdown. From upper left to bottom right: [4]
    • Cubic Inch Displacement (CID): The first three numbers, found in the upper left corner, tell you the size of the engine.
    • Manufacturing Plant: The single letter to the right of the CID is where the engine was built. "C" is for Cleveland, "E" is for Ensite, Canada, and "W" is for Windsor, Canada.
    • Year: The next two numbers are for the year the engine was built. 70, for example, would mean it was made in 1970.
    • Month Built: This hyphenated number and letter correspond to the month. The months are in alphabetical order, so A = January and M = December. There is no "i" so people don't confuse it the number 1. 0-A would mean January 1970, 5-C March 1975, etc. (assuming the year code is for the 70's).
    • Engine Code Number: This final 3-digit number is the ID of your particular engine. You can look up this code online to see the specs of your current engine. [5]
    6. Advertisement
Method 2
Method 2 of 2:

Decoding Casting Tags

PDF download Download Article
  1. The casting tag is etched into your motor when it is created, and is used to help find the right parts if you need a replacement. This code also packs a large amount of information in it that will help you get to know your engine better.
    • You may need to clean the engine with a rag and some degreaser if it is too dirty to see the letters.
    • This code is usually on the side of the engine, but you might not be able to see it when the engine is in a car with older models. Use a light to scan both sides of the engine to find it.
    • Ex.C5AE-9425-B [6]
  2. This will be a letter. If the letter is a "B," it means that the engine was built in the 1950s. Each decade after that has its own succeeding letter; "C" designates the 1960s, "D" designates the 1970s, and so on. The digit after the letter is the actual year. So C9 would be 1969, E4 would be 1984, etc. [7]
  3. This will be a letter, and it signifies the basic design of the vehicle as shown below. Of course, this code should match up with the car that it is in (i.e. a Mercury could be coded E5M), but you may be dealing with standalone engines or redesigned cars.
    • "A" - Generic and full-size engine
    • "D" - Falcon
    • "E" - Truck
    • "F" - Foreign Trans-Am racing
    • "G" - 1961 to 1967 Comet/1968 to 1976 Montenegro
    • "H" - 1966 to 1982 Heavy truck
    • "J" - Industrial Ford
    • "L" - Lincoln
    • "M" - Mercury
    • "O" - 1967 to 1976 Ford Torino/all Ford Fairlane
    • "S" - Thunderbird
    • "T" - Truck
    • "W" - Cougar
    • "Y" - Meteor
    • "Z" - Mustang
    • "6" - Pantera
  4. " This digit stands for the type of part. E stands for "Engine," so this should always be the fourth digit you see when identifying Ford motors.
  5. These four numbers will always be between 6000 and 6898, which describes the part numbering of the generic engine assembly. Different parts of the motor will correspond to different four-digit numbers.
  6. 6
    Check the last digit, usually a letter, to determine the version of your part. If your engine is modeled after the original design, this letter will be A. If it is the third manufactured version of the engine, it will be a C, and so on. This digit can be up to three digits long. For example, AB would be the 28th version — 26 for A-Z, then two for A-B. [8]
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What does the number atop the motor mean?
    Community Answer
    That is a part number, not the motor number which is stamped on the block. You may get a clue by googling the part number. The letters indicate a part from the cooling system. The easy way to identify the motor, if it's the original, is by the VIN (vehicle identification number). Using that, you can get all the information (including manuals) from Ford.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 13 Helpful 21
  • Question
    Does Ford make a V8 with a rear distributor?
    Community Answer
    Yes, they do, but they are pretty hard to find.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 12 Helpful 29
  • Question
    I have a Ford 460 engine. The only number I can find on it is D3TE-AE. What year is this?
    Community Answer
    It's a 1973 engine. D = '70s; 3 = year; E = engine. It's probably a Galaxy.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 18 Helpful 22
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • You may need to clean sections of the motor to find the tag, so take a bottle of degreaser, a wire brush and a rag with you on your search.
        Thanks
        Helpful 0 Not Helpful 5
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Degreaser
      • Wire brush
      • Rags

      You Might Also Like

      How to
      Find the Paint Color Code on Ford Vehicles
      How to
      Find the Chassis and Engine Number
      How to
      Reset Your Vehicle's MAF Sensor
      How to
      Reset a Check Engine Light and Clear Error Codes
      Your Guide to Cleaning a Dirty Mass Air Flow Sensor
      Identifying Positive and Negative Car Battery Terminals
      The Best Way to Restore Gasoline and Make it Usable Again
      How to
      Find Your Engine's Top Dead Center (TDC)
      How to
      Tell What Kind of Engine Your Car Has
      How to
      Check an Idle Air Control Valve
      How to
      Diagnose a Check Engine Light That Flashes Then Stops
      How to
      Detect and Fix a Misfire: Common Problems, Solutions, & More
      How to
      Test a Fuel Pump Relay with a Multimeter
      Why Your Check Engine Light Comes On and Off
      Advertisement

      References

      1. ↑ http://www.fordification.com/tech/engineIDtags.htm
      2. ↑ http://www.wrljet.com/fordv8/idtag.html
      3. ↑ http://www.fordification.com/tech/engineIDtags.htm
      4. ↑ http://www.fordification.com/tech/engineIDtags.htm
      5. ↑ http://www.wrljet.com/fordv8/idtag.html
      6. ↑ http://www.mustangtek.com/FordDecode.html
      7. ↑ http://www.mustangtek.com/FordDecode.html
      8. ↑ http://www.mustangtek.com/FordDecode.html

      About This Article

      Article Summary X

      To identify a Ford motor, start by checking valve cover bolts on the top of the engine for Ford markings. If the bolts are unmarked, look for an ID tag for manufacturer information. Tags can be found under coil attaching bolts for 6-cylinder engines and some 8-cylinder engines, or under the dipstick attaching bolts on other 8-cylinders. If you can’t find the tag there, look under the heat indicator bulb, carburetor attaching stud, or the ignition coil bolt, and check the ID tag for information like engine code number. To learn how to identify a Ford motor using casting tags, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 585,408 times.

      Reader Success Stories

      • John Groshong

        Feb 13, 2017

        "I was looking to buy an engine in boxes except for the block. I wasn't sure if it was what I was wanting. I ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement