How to Inflate a Car Tire with a Bike Pump

Keeping your tires properly inflated can improve the fuel economy and performance of your vehicle while reducing uneven wear in your tires. [1] But if you don't have an air compressor, you may be scratching your head as to how to inflate your tires at home. It's a good thing this can be done easily with a Schrader valve equipped bike pump. As long as the tire hasn't broken loose from the bead, a bike pump will do the trick! [2]

Part 1
Part 1 of 3:

Prepping to Pump

PDF download Download Article
  1. A clear parking area will allow you to freely move around your car to fill up tires without anything getting in the way. Parking on a level surface will make it easier for you to balance and operate your pump.
    • If you don't have a suitable clear, flat surface at home, you might park in the street or a neighbor's driveway.
    • Driving on tires that are flat can damage your tire or deform the rims of your wheels, causing expensive damage. Drive as little as possible on flat tires. [3]
  2. The valve cap for each tire will be on the sidewall of the tire, positioned closely to the metal of the wheel's rim. Generally, these caps are screw-on. Unscrew the valve caps for all tires. [4]
    • Valve caps are small and easy to lose. To prevent yours from getting lost, keep them in a sealable container, like a plastic baggie or a lidded plastic container.
    Advertisement
  3. This value will be in PSI (pounds per square inches). The recommended tire pressure for your vehicle is generally written on a sticker inside of the driver's door. Open this door and inspect it for a tag indicating the ideal air pressure. [5]
    • If you can't find the tire pressure information on your door, or if the information is unreadable, tire pressure information can be found in your car's manual.
    • In the rare case that you lack both the tire pressure door sticker and your car's manual, you can look up the optimal air pressure for your car and tire online.
    • For some vehicles, the recommended tire pressure for front and back tires may be different. [6]
  4. Wait for three hours after driving for the most accurate reading. [7] Inspect the tire pressure gauge and tire valve to make sure these are free of dirt or grit. This can sometimes get caught in a valve, making it leak, difficult to pump, or difficult to take a pressure reading. Take your gauge and:
    • Position it on top of the stem the tire valve. Press the gauge into the valve firmly until the sound of escaping air ceases, then release.
    • Look at the reading on your gauge. Many common gauges have a slide reader that pops out of the base of your gauge after taking the reading.
    • Compare this reading to the recommended PSI to determine whether your tire needs air. Repeat this for all tires on your vehicle. [8]
    5. Advertisement
Part 2
Part 2 of 3:

Inflating Car Tires with a Bike Pump

PDF download Download Article
  1. Take your bike pump and position its valve end over the valve of the tire you are pumping. [9] The lever on the back of the valve should be touching the hose in the unlocked position. Press the pump valve firmly onto the tire valve, then raise the lever to lock the pump onto the tire valve.
    • When attaching your pump to the tire, you'll likely hear air escaping. This is completely natural when locking your bike pump valve in place.
    • A Schrader valve generally has a stem, at the end of which is threading for a screw on cap. Inside the end of the stem, you should see a small metal pin.
    • Presta valves, the second most common valve used for bike pumps, will have a thin, threaded cylinder of metal extending from the stem.
    • Many bike pumps come equipped with a Schrader valve, which is also called an American valve. This part is necessary for pumping up your car tires.
  2. Raise and lower the pump bar of your bike pump steadily. This will take some time and elbow grease. [10] At regular intervals, check your tire pressure. Overfilling your tires can cause strain on the tire and compromise its integrity. [11]
    • Always follow the manufacturer recommendations for best results, but generally, avoid filling your tires with five PSI more or less than the recommended amount.
    • A bike pump will move less air at a slower rate than a compressor, which means that this can take quite some time before your tire is filled. [12]
  3. In the event you overfilled your tire with air, use your tire pressure gauge or some other tool to press the pin in the center of the tire valve to the side of the valve. This will release air in the tire and decrease pressure.
    • Check your tire pressure regularly while adjusting. If you release too much pressure, you'll have to pump again. [13]
    • Be precise when filling your tires with air. Filling tires with unequal amounts of air will cause them to wear out more quickly, negatively impact fuel economy, and more. [14]
  4. In the fashion described, move from tire to tire, checking tire pressure, inflating, and adjusting each until all tires are the same pressure. When all tires are complete, take your valve caps from their container and reattach them. [15]
    5. Advertisement
Part 3
Part 3 of 3:

Troubleshooting Problems

PDF download Download Article
  1. In a pinch, these kinds of gauges can give you a rough idea of the air pressure of your tires. However, these are often inaccurate and wear out easily, so a separate tire pressure gauge is best.
    • Tire pressure gauges are relatively inexpensive and small. Put one in the glove box of your car so you always have one on hand. [16]
  2. Sometimes, the pump valve and the tire valve will seat poorly, creating gaps where air can escape. This can decrease the amount of air you pump into the tire with each pump.
    • In especially bad cases, a poor seal between valves can cause the tire to deflate faster than you are inflating it.
    • Most poorly seated valves can be corrected by removing the pump valve and reattaching it again.
  3. Bike pumps have a fairly long shelf life, but the hose of older pumps can break down over time. Cracks in it can result in more air being pumped outside the tire than what makes it inside.
    • Frequently, corroded or cracked hosing can be identified by sight or with a touch check. If you feel cracks, holes, or disintegrating hose, your hose may have a leak.
    4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • For the best performance and fuel efficiency, check your tires monthly and after significant changes in temperature.
        Thanks
        Helpful 1 Not Helpful 0
      • If it’s a hot day take a break every 1-2 minutes when using a bike pump because they can easily overheat and crack due to the prolonged time it takes to pump the car tire.
        Thanks
        Helpful 4 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warning

      • Over or under inflating the tires of your vehicle can result in expensive damage to your tire, wheel, and car.
      • Avoid driving on flat tires, as this can permanently deform your rim, requiring you to replace it.

      Things You'll Need

      • Tire pressure gauge (for cars)
      • Bike pump (with Schrader valve attachment)

      You Might Also Like

      How to
      Install Snow Chains on Tires
      How to
      Put a Spare Tire on Your Vehicle: 11 Simple Steps
      How to
      Loosen Lug Nuts
      How to
      Let Air Out of a Tire
      How to
      Change Wheel Bearings
      How to
      Remove a Stuck Wheel & Prevent It From Happening Again
      How to
      Check Tire Tread with a Penny
      How to
      Put Tires on Rims
      How to
      Cut a Tire
      How to
      Replace Tie Rod Ends
      How Old Are Your Tires? Reading the DOT Code & Replacing Old Tires
      How to
      Measure Rims
      Air Pressure Draining from Your Tires? Here’s What It Means and How to Fix It
      How to
      Identify Run Flat Tires
      Advertisement

      References

      1. ↑ http://www.bridgestonetire.com/tread-and-trend/drivers-ed/how-to-check-tire-pressure
      2. ↑ Howard Fleischmann. Automotive Tire & Repair Specialist. Expert Interview. 4 June 2021.
      3. ↑ http://www.dmv.org/how-to-guides/check-tire-pressure.php
      4. ↑ http://www.maxxis.com/media/420089/layered_tire.pdf
      5. ↑ http://www.dmv.org/how-to-guides/check-tire-pressure.php
      6. ↑ http://www.bridgestonetire.com/tread-and-trend/drivers-ed/how-to-check-tire-pressure
      7. ↑ http://www.dmv.org/how-to-guides/check-tire-pressure.php
      8. ↑ http://www.bridgestonetire.com/tread-and-trend/drivers-ed/how-to-check-tire-pressure
      9. ↑ Howard Fleischmann. Automotive Tire & Repair Specialist. Expert Interview. 4 June 2021.
      1. ↑ Howard Fleischmann. Automotive Tire & Repair Specialist. Expert Interview. 4 June 2021.
      2. ↑ https://www.youtube.com/watch?v=bF9Y8OcxM4M
      3. ↑ http://www.dmv.org/how-to-guides/check-tire-pressure.php
      4. ↑ https://www.youtube.com/watch?v=bF9Y8OcxM4M
      5. ↑ http://www.dmv.org/how-to-guides/check-tire-pressure.php
      6. ↑ https://www.youtube.com/watch?v=bF9Y8OcxM4M
      7. ↑ http://www.dmv.org/how-to-guides/check-tire-pressure.php

      About This Article

      Article Summary X

      Although it will take a little elbow grease, you can easily inflate your car tires with a bike pump. Start by unscrewing your wheels' valve caps, which are located on the inner part of the tire. Then, attach your pump securely so no air leaks out and pump your tires. Use a pressure gauge to make sure your tires have the right amount of air in them. Attach your gauge every 10 pumps or so to check the tire pressure. You can find your tires’ recommended pressure in your owner’s manual or on a sticker inside the driver’s door. For more tips, including how to check your pump for leaks, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 185,055 times.

      Reader Success Stories

      • T. Mehta

        May 1, 2018

        "I had a flat tire and the lug nuts were too tight to remove without a torque wrench. After reading how to use my ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement