How to Install Cabinet Hinges

PDF download Download Article
PDF download Download Article

Installing cabinet hinges correctly is critical when you’re attaching cabinet doors so they’re properly aligned and open smoothly. But with the right tools and accurate measurements, you can easily install your own cabinet hinges. Start by choosing what type of hinge you want to install. A concealed hinge will be hidden from view but will require you to bore a hole in the cabinet door. A traditional hinge will be visible, but is easier to install and can add a decorative accent to your cabinet. Once you’ve selected your hinges, you can start measuring and installing them!

Method 1
Method 1 of 2:

Installing Concealed Hinges

PDF download Download Article
  1. Concealed hinges, also known as a European hinge or a cup hinge, get their name from the fact that they’re hidden from view when the cabinets are closed. If you don’t want to see your hinges, opt for the concealed variety.
    • You can purchase concealed hinges at home improvement stores, hardware stores, and online.
    • Concealed hinges may have less range of motion than other traditional hinges.
  2. Use a clear, flat space to work on. Place the cabinet door face down on the surface so that the side you plan to attach the hinges to is facing toward you. [1]
    • Make sure the work area is clean so you don’t get markings on your cabinet doors.
    Advertisement
  3. Use a ruler, tape measure, or combination square to measure the distance from the top edge of the cabinet door and mark a horizontal line with a pencil. Then, measure from the bottom edge of the door and mark a line. [2]
    • Make sure both markings are perfectly even so the cabinet door will open and close evenly.
  4. Put the hinge on the hinge-side of the cabinet door where you marked from the bottom and arrange it so it’s in the position it needs to be installed in. Use a pencil to mark around the hinge so you know where you need to bore your hole. Repeat the process for the mark you made at the top of the cabinet door. [3]
    • Make sure the 2 measurements match so the hinges are installed evenly!
  5. A Forstner drill bit is used to bore holes into wood to install hinges. Fit the bit into the end of your power drill and make sure it’s secure. Then, adjust the line depth on the side of the bit so you can know when to stop boring into the wood. [4]
    • The line depth must be exact so you don’t bore through the cabinet door.
  6. Hold the end of the bit against the cabinet door in the center of the line that you marked. Bring the drill up to speed to start boring through the wood. When the bit reaches the line depth that you set, stop boring and remove the bit. Repeat the process for the other hinge location marked on the door.
    • Start the drill slowly to avoid punching through the door.
    • Apply pressure against the drill to drive the bit into the door.
  7. The hinge cup refers to the convex, cup-like part of the concealed hinge that goes inside of the bored hole in the door. Fit the cup of the hinge into the hole so the screwholes are flush against the surface of the cabinet door. Use a power drill to drive wood screws into the screw holes so they’re securely attached.
    • Use the screws that came with the hinges if you have them.

    Tip: If you don’t have the original screws for the hinges, use 5 ⁄ 8  in (1.6 cm) #6 wood screws.

  8. The cabinet door must be positioned correctly so it’s level and will open and close properly. Shim the door against the cabinet and use a ruler or tape measure to measure the small gap between the cabinet door and the cabinet surface.
    • Write down the exact measurement.
    • A common gap measurement is 1 ⁄ 16 inch (0.16 cm).
  9. Measure the distance from the edge at the front of the cabinet itself. Mark a line with a pencil that runs from the top of the cabinet down to the bottom so you can intersect it with your hinge measurements.
    • Use a ruler to make a straight line.
  10. Take your gap measurement and add it to 3.5 inches (8.9 cm), the distance you measured to install your hinge cups. Then, measure that distance from the top and bottom of the cabinet and mark the locations with a pencil.
    • For example, if your gap measured 1 ⁄ 8 inch (0.32 cm), then adding it to 3.5 inches (8.9 cm) would give you 3.625 inches (9.21 cm).
    • When you make your marking, the 2 lines on your cabinet should intersect.
  11. Place the mounting plate at the location where both lines intersect and line it up so the screw holes are even. Use a power drill to drive screws into the screw holes to secure the plate in place. Then, attach the other mounting plate to the cabinet in the same way.
    • Use the screws that came with the hinges or use #6 wood screws.
  12. Hold the door so it’s in the open position and slide the hinges into the mounting plates. Press on the bars of the hinge to snap them into place on the mounting plates. Open and close the door to make sure the hinges work and the door is even.
    • The hinges should make a clicking or snapping sound when they fit into place.
    13. Advertisement
Method 2
Method 2 of 2:

Attaching Traditional Hinges

PDF download Download Article
  1. Traditional hinges are mounted to the surface of the cabinet door and are visible, or partially visible when the door is closed. They’re easier to install than concealed hinges and they can add a decorative effect to your cabinet door.
    • There are a variety of traditional hinges including, butt hinges, flush hinges, and antique hinges, but they all fit onto your cabinets in a similar fashion.
    • Look for traditional hinges at home improvement stores, hardware stores, and online. You could also look for ornate or decorative hinges at antique stores.
  2. Start by placing the hinges on the cabinet where you plan to install them, wrapped around the outer edge of the cabinet wall in the open position. The hinges should sit flush against the outside and inside of the cabinet.
    • If you’re installing the hinges on the back of the door, have the 2 sides of the hinges laying on top of each other instead.
    • You can use as many hinges as you like for your cabinet doors, but you’ll need at least 2 to hang it properly.
  3. Once you’ve decided on the placement of the hinges, make sure they’re all evenly spaced apart from each other as well as the top and bottom edge of the cabinet. Use a ruler or tape measure to check the spacing to make sure they’re even. [5]
    • Adjust the spacing by simply moving the hinges.
    • The spacing needs to be even so the cabinet door fits correctly and opens and closes smoothly.
    • Write down the measurements so you can duplicate them if you plan to install hinges on multiple cabinets and cabinet doors.
  4. As you’re wrapping the hinges around the cabinet, tape them in place with painter’s tape so they stay in position. Measure the space between the hinges so they’re even and use enough tape to hold them in place. [6]
    • If you need to adjust the spacing, simply remove the tape, adjust the hinge, and reapply the tape.
  5. Once the hinges are aligned, screw the cabinet-side of the hinge to the cabinet with a power drill. Make sure the screws are fully inserted so they’re flush with hinge and are sticking out of the screwhole. [7]
    • Use the screws that came with the hinges, or use #6 wood screws.
  6. Flip the hinges over on each other so they’re in the closed position. Apply a line of hot glue to the top of the hinges and place the cabinet door on top of them. Adjust the door so it’s even and hold it still to allow the glue to dry for a few seconds. [8]
    • Use a very thin line of glue so it’s not visible after you screw the hinges to the door.

    Tip: Open and close the door once the glue is dry to make sure it’s lined up correctly. If it isn’t, pull the door off of the hinges, apply more glue, and realign it.

  7. Use a power drill to drive screws into the screw holes to secure the hinges to the door. Drive the screws all the way in so the tops of the screws aren’t sticking out, which could cause the door to be uneven. [9]
    • Open and close the door to make sure the hinges are working properly and the door is lined up correctly.
    8. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you install flush mount hinges for cabinets?
    Ryaan Tuttle
    Home Improvement Specialist
    Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
    Ryaan Tuttle
    Home Improvement Specialist
    Expert Answer
    Buy a jig or template to help install your hinge. Then, purchase a router to do the rest of the work.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You’ll Need

      Installing Concealed Hinges

      • Concealed hinges with corresponding mounting plates
      • Ruler, tape measure, or combination square
      • Power drill
      • 35-millimeter Forstner bit

      Attaching Traditional Hinges

      • Painter’s tape
      • Hot glue gun and glue
      • Power drill

      You Might Also Like

      How to
      Check Room Temperature with or without a Thermometer
      How to
      Avoid White Dust from a Humidifier
      How To Reset and Reboot Your Roomba
      How to
      Identify 3-Phase (Or Single Phase) Electricity In Your Home
      Where to Look for a Frigidaire Appliance Model Number: Full Guide
      How to
      Use a Glass Thermometer
      How to
      Check a Start Capacitor
      How to
      Clean a Bissell Carpet Cleaner
      How to
      Use a Breville Espresso: 6 Steps for the Best-Tasting Espresso
      How to
      Find and Read the Model Number of Any GE Appliance
      How to
      Install an LP Gas Conversion Kit
      How to
      Connect a Roomba to WiFi
      How to
      Turn Off a Pilot Light
      How to
      Clean a Steamer
      Advertisement

      References

      1. ↑ https://housearctic.com/how-to-install-cabinet-door-hinges/
      2. ↑ https://housearctic.com/how-to-install-cabinet-door-hinges/
      3. ↑ https://housearctic.com/how-to-install-cabinet-door-hinges/
      4. ↑ https://housearctic.com/how-to-install-cabinet-door-hinges/
      5. ↑ https://youtu.be/7a_NdZU2XVw?t=7
      6. ↑ https://youtu.be/7a_NdZU2XVw?t=7
      7. ↑ https://todayshomeowner.com/video/how-to-install-kitchen-cabinet-doors/
      8. ↑ https://youtu.be/7a_NdZU2XVw?t=78
      9. ↑ https://youtu.be/7a_NdZU2XVw?t=117

      About This Article

      Thanks to all authors for creating a page that has been read 172,185 times.

      Did this article help you?

      Advertisement