How to Install a Front License Plate

PDF download Download Article
PDF download Download Article

Some states require front license plates, but not all vehicle makes and models have front license plate brackets. If you do have a front bracket, just screw your license plate onto it. If you don’t, there are still easy options available. You could try an adhesive-mounted bracket or a bracket designed for the shape of your specific model’s bumper. There are also brackets that fit into the tow hook anchor located on the front bumper of many newer models. If you don’t mind drilling holes into your bumper, you could always just install your license plate the old fashioned way.

Things You Should Know

  • Install a plate into a bracket by unscrewing the four corner screws, lining up the plate, and then screwing new screws into the existing holes.
  • If you're missing a bracket, press on an adhesive bracket or install a tow hook bracket by screwing your plate into the tow hook stud.
  • Or, screw a new bracket into your car's metal bumper by drilling 1⁄8 inch (0.32 cm) pilot holes and fastening your bracket into them.
Method 1
Method 1 of 4:

Using an Existing License Plate Bracket

PDF download Download Article
  1. Locate screws at the corners of the license plate bracket on your front bumper. [1] Turn them counterclockwise with a screwdriver to remove them, then keep them in a safe place so they don’t get lost. If the bracket held an old license plate, it’ll come off when you remove the screws. [2]
    • If your vehicle is new, the license plate bracket screws might be in the glove compartment.
    • If you have no screws, you can pick up some license plate screws at a nearby hardware or automotive store.
  2. Some license plate brackets have a screw-mounted frame that fits over the license plate. [3] If your bracket has a frame, just remember to align it over your license plate and insert screws through both during installation.
    • You’ll know you have a license plate frame if a separate rectangular piece comes off when you remove the bracket’s screws.
    Advertisement
  3. Locate the holes in the corners of the license plate and the bracket. Place the license plate into the bracket so the holes are aligned. [4]
  4. Insert your screws through the holes in the bracket and license plate (and frame, if applicable). Tighten the screws by turning them clockwise with your screwdriver to complete installation. [6]
    5. Advertisement
Method 2
Method 2 of 4:

Using an Adhesive-Mounted Bracket

PDF download Download Article
  1. Look online or visit your local automotive store for a no-drill mounting bracket that fits your car’s make and model.
    • Many no-drill brackets use a strong adhesive and fit a variety of makes and models. Some brackets fit only a specific model and include special hardware to clamp the bracket onto the grill or bumper. Check your product manual for specific installation instructions. [7]
  2. An adhesive-mounted bracket requires a clean installation site. Locate the center of your bumper where you’ll mount the bracket, clean it with alcohol wipes, then let it air dry or dry it with a clean microfiber cloth. [8]
    • Some brackets attach to the front face of the bumper, while others stick to indentations or gaps unique to specific models. Check your installation instructions for details about the mounting location.
  3. The adhesive is protected by a film, which you should leave in place while you test the fit. Place the bracket onto the mounting site to make sure it fits and matches your model. [9]
    • If it doesn’t line up with your car’s bumper, you might have accidentally bought the wrong kind of bracket. See if you can exchange it for the correct bracket.
  4. After you’ve double checked your bracket’s fit, peel back the protective film to expose the adhesive. Press the bracket firmly onto the bumper’s front face, underside, or other mounting site specified in your product’s instructions. [10]
    • Try to be precise when you mount the bracket, since you'll only get one shot.
  5. Once the bracket is in place, you can align its holes with the holes in your license plate. If your product includes a license plate frame, place it over the license plate and align its holes with those in the bracket and plate. Drive the screws clockwise through the holes to complete installation. [11]
    6. Advertisement
Method 3
Method 3 of 4:

Installing a Tow Hook Bracket

PDF download Download Article
  1. Many models have a plastic plate in the front bumper that you can press and pop out. It conceals a tow hook anchor, and license plate brackets are available with a threaded stud that drives into the anchor. [12]
    • Make sure you have a tow hook anchor before you purchase a tow hook license plate bracket kit.
  2. Grab the tow hook stud included in your kit and insert the threaded end into the anchor slot. Turn it clockwise until it’s tight. [13]
  3. Align the hole in the bracket plate with the hole in the tow hook stud. Your kit includes a bolt that fits through these holes. Locate it and drive it through the holes to attach the bracket plate to the tow hook stud. [14]
    • Turn the bolt clockwise with your fingers to get it started, then use a ratchet to finish tightening it.
  4. With the bracket in place, all that’s left is to screw on the license plate. If your product includes a license plate frame, remember to place it over the plate and drive the screws clockwise through both the plate and the frame. [15]
    5. Advertisement
Method 4
Method 4 of 4:

Drilling Holes into the Front Bumper

PDF download Download Article
  1. Drilling into metal is more complicated than drilling into fiberglass. If you have a chrome bumper, you might want to try a no-drill method if you've never drilled into metal.
    • If you do want to try drilling into a chrome bumper, you'll need to take a few more steps and use special tools. You'll need a center punch, a bit made for drilling into metal, a countersink bit, and safety glasses. [16]
  2. Use a measuring tape to measure your bumper’s length so you can find the exact center. Mark the lengthwise center with tape or a felt-tip pen, then measure the bumper’s height to find that center point. Once you’ve found the bumper’s exact center point, place your license plate bracket over it. [17]
    • If you’re not using a bracket, just place the license plate itself onto the bumper.
  3. Hold your license plate bracket over the bumper’s center point and locate the pre-drilled mounting holes. Use a felt-tip pen to mark where you’ll need to drill holes into your bumper to line up with the bracket’s holes. [18]
    • Keep in mind the bracket’s mounting holes are where it mounts to the bumper, not the holes at the corners that you’ll use to screw on the license plate.
    • If you’re not using a bracket, just make marks on the bumper for the holes at the plate’s top corners.
  4. After you’ve marked your guide holes, set the bracket or license plate aside. Use a power drill and a 1 ⁄ 8 inch (0.32 cm) bit to drill shallow pilot holes into the bumper. Drill your pilot holes only about 1 ⁄ 8 inch (0.32 cm) deep into the bumper. [19]
    • If your bumper is chrome, you'll need to start your holes with a center punch before you can start drilling.
  5. After marking the spots on the chrome where you'll need to drill, hammer your center punch into the spots to make indentations. It's wise to add lubricating oil to the indentations to reduce friction and heat. Wear safety glasses to protect your eyes. [20]
    • Placing masking or duct tape around the spot where you're drilling can help protect the chrome finish if your bit slips.
    • Hold your drill (with a bit made for drilling into metal) perfectly perpendicular to the surface. Use firm, steady pressure to drill into the chrome.
    • After you drill the holes, switch to a countersink bit and rotate it 3 to 4 revolutions to smooth sharp metal burrs from the hole's leading edge.
  6. Line the bracket’s mounting holes up with those you’ve just drilled into the bumper. Drive screws clockwise through the bracket into the bumper. [21]
  7. After mounting the bracket, line the holes at the corners of the license plate with those at the bracket’s corners. Drive screws clockwise through the holes to secure the license plate and complete installation. [22]
    • If you’re not using a bracket, screw the license plate directly onto the bumper.
    8. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Do you really need a license plate frame?
    Audra Fordin
    Certified Automotive Technician
    Audra Fordin is a Certified Automotive Technician, the Founder of Women Auto Know, and the Owner of Great Bear Auto Repair in Flushing, New York. With more than 38 years of experience, she has intensive knowledge about foreign and domestic auto repairs. Audra has been featured on numerous news and talk shows such as The Today Show, Inside Edition, and Anderson Cooper.
    Audra Fordin
    Certified Automotive Technician
    Expert Answer
    Definitely! The license plate frame helps mount the license plate directly onto the bumper of your car.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 11 Helpful 5
  • Question
    If I screw the license plate directly into my bumper, do I need to worry about rust? If so, is there a way to prevent rust?
    Community Answer
    Put four appropriately-sized washers into fingernail polish and let dry. Once done drying, put behind the license plate on the screw.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 21 Helpful 13
  • Question
    Where do you get a license plate bracket for a 2019 Nissan rogue?
    Jared Chamberlain
    Community Answer
    There are many websites to buy license plate brackets for any vehicle if you want to take out the middle man. Otherwise, you can go to almost any auto parts store such as Napa auto parts, Auto Zone, and Advanced Auto Parts and have them order a specific kind for your vehicle.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Find Out the Owner of a License Plate: A Simple Guide
      Where Do You Find a Car's VIN?
      Your Definitive Guide to Vehicle Tag Transfers in Florida
      Easy Ways to Register a Car from Out of State in California
      How to
      Take a Name off a Car Title
      How to
      Remove a License Plate
      How to
      Use a VIN Number to Check a Car's Options
      How to
      Fill Out a Car Title Transfer
      How to
      Transfer a License Plate
      How to
      Locate Motor Vehicle by VIN Number
      How to
      Register a Car Without a Title
      How to
      Check Vehicle History for Free
      How to
      Replace a Texas Driver's License
      How to
      Register a Car in Illinois
      Advertisement

      References

      1. ↑ Audra Fordin. Certified Automotive Technician. Expert Interview. 13 January 2022.
      2. ↑ https://driving-tests.org/beginner-drivers/how-to-install-a-license-plate/
      3. ↑ Audra Fordin. Certified Automotive Technician. Expert Interview. 13 January 2022.
      4. ↑ https://driving-tests.org/beginner-drivers/how-to-install-a-license-plate/
      5. ↑ Audra Fordin. Certified Automotive Technician. Expert Interview. 13 January 2022.
      6. ↑ https://driving-tests.org/beginner-drivers/how-to-install-a-license-plate/
      7. ↑ https://www.youtube.com/watch?v=-mzI7jBWrsQ&feature=youtu.be&t=103
      8. ↑ https://www.corvetteforum.com/how-tos/a/corvette-how-to-install-front-license-plate-bracket-368445
      9. ↑ https://www.corvetteforum.com/how-tos/a/corvette-how-to-install-front-license-plate-bracket-368445
      1. ↑ https://www.corvetteforum.com/how-tos/a/corvette-how-to-install-front-license-plate-bracket-368445
      2. ↑ https://www.corvetteforum.com/how-tos/a/corvette-how-to-install-front-license-plate-bracket-368445
      3. ↑ http://www.slate.com/blogs/browbeat/2013/09/05/loading_eye_bolts_what_they_are_and_what_they_do_explained_photos.html
      4. ↑ https://www.youtube.com/watch?v=mNbl_OMoWqI&feature=youtu.be&t=75
      5. ↑ https://www.youtube.com/watch?v=mNbl_OMoWqI&feature=youtu.be&t=83
      6. ↑ https://www.youtube.com/watch?v=mNbl_OMoWqI&feature=youtu.be&t=98
      7. ↑ https://www.ridetheducks.com/how-to-drill-hole-in-fiberglass/
      8. ↑ https://wsdot.wa.gov/sites/default/files/2022-05/Toll-Instructions-LicensePlatePassInstallation.pdf
      9. ↑ https://www.youtube.com/watch?v=5biIBcMnexE&feature=youtu.be&t=3
      10. ↑ https://itstillruns.com/install-front-license-plate-bracket-7533048.html
      11. ↑ https://itstillruns.com/drill-chrome-8638277.html
      12. ↑ https://itstillruns.com/install-front-license-plate-bracket-7533048.html
      13. ↑ https://itstillruns.com/install-front-license-plate-bracket-7533048.html

      About This Article

      Article Summary X

      To install a front license plate on a car with an existing license plate bracket, use a screwdriver to remove the 4 corner screws that hold the license plate in place. If there is a frame, you should be able to easily pull it off once you remove the screws. Align the license plate with the holes in the bracket, then align the frame as well, if there is one. Replace the screws and tighten them with the screwdriver to secure the license plate. Keep reading to learn how to install a front license plate with an adhesive-mounted bracket!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 505,070 times.

      Did this article help you?

      Advertisement