How to Install an Inwall Air Conditioner

PDF download Download Article
PDF download Download Article

Looking to cool a room without a clunky A/C unit sticking out of a window? Well, look no further than an inwall air conditioner! Also known as through-the-wall or wall units, inwall air conditioners are installed directly into your wall to provide cool air without being as noticeable as a window unit. They’re also relatively easy to install on your own if you have the right tools and some experience with DIY home improvement projects. To make your job easier, we’ve covered the entire installation process from start to finish, so you can cool off as soon as possible.

Part 1
Part 1 of 3:

Measuring and Marking the Location

PDF download Download Article
  1. Wall sleeves are generally about 15 in (38 cm) tall, 26 in (66 cm) wide, and 16 in (41 cm) deep. Select an exterior wall that doesn’t have any plumbing or electrical wiring, and choose a spot near an electrical outlet you can plug the unit into. [1]
    • A wall sleeve is the casing that supports your air conditioner as it slides into the wall.
    • The wall you choose should border the outside of your home–it shouldn’t be an interior wall between 2 indoor rooms.
    • Many experts suggest mounting your AC around 1 to 5 ft (0.30 to 1.52 m) off the floor. If you aren’t sure, consider speaking with an installation professional about placement.
  2. Mark the wall studs with a stud finder . Arrange the device so it’s completely flush with the wall, and then power it up. Gently glide the stud finder in a slow, straight horizontal line until the device makes a noise or flashes. Then, slowly move the stud finder in the opposite direction to confirm the stud’s exact location. [2] Sketch an “X” to mark the stud, and continue searching and marking until you’ve found all the wall studs in your AC’s proposed spot.
    • There’s about 16 in (41 cm) of space between wall studs in most modern homes. If your house is on the older side, the wall studs may actually be 24 in (61 cm) apart. [3]
    Advertisement
  3. Inspect the box or packaging that your wall AC and jot down the dimensions of the unit. Then, grab a ruler or tape measure and mark those exact dimensions onto the wall. Try to keep your lines as straight and even as possible. [4]
    • If you can’t find any dimensions, measure the sleeve itself with a ruler or tape measure.
  4. Measure out and sketch this second rectangle so it’s about 2.5 in (6.4 cm) bigger than your original outline. [5]
    • This second, larger outline gives you enough clearance to install a supportive frame around your AC sleeve.
  5. Hold the level flush against this upper line and see if it’s completely straight. If the line is slightly off-kilter, re-draw it on your wall, using the level as a reference. [6]
    6. Advertisement
Part 2
Part 2 of 3:

Creating the Wall Opening

PDF download Download Article
  1. While you shouldn’t be cutting through any wires or cables to install your AC, you still don’t want to risk getting a nasty shock during your renovations. To be safe, turn off the corresponding switches on your home circuit breaker before getting started.
  2. As you open up your wall, you’ll have to remove insulation from a select portion of the wall. Insulation is often made with fiberglass, which isn’t safe to handle with your bare hands. Make sure your eyes, nose, mouth, and skin are all protected before you get started. [7]
    • To be extra safe, slip on a pair of long pants and a long-sleeved shirt so you don’t get any fiberglass on your arms or legs.
  3. Carefully saw through the largest rectangular outline on your wall. Pull out the rectangle of drywall, and then cut out any visible insulation from the opening. [8]
    • You can also lightly slice around the edge of the outline with a drywall knife and knock out the bulk of the rectangle with a hammer. [9]
    • Feel free to sand the edges of the wall if you want to smooth them out.
  4. Slice along the top and bottom of the studs and remove the part that intersects with your opening. [10]
    • Wall studs resemble vertical planks running through your walls.
  5. Nestle your drill bit in each corner and drill all the way through the rest of the wall. Repeat this process with all 4 corners; when you’re finished, you should see 4 distinct dots on the outside of your home. [11]
    • When put together, these 4 dots create the rectangular outline of your wall opening.
    • Home improvement experts don’t recommend a specific drill bit size for this project–just make sure that your bit is large enough to create noticeable holes through your exterior wall.
  6. Draw 4 lines around the drilled holes that exactly match the dimensions of your interior wall opening. Then, carefully slice through the outlined siding with a circular saw. [12]
    • If your home’s exterior is made of stucco, it may help to carve a 1 ⁄ 4  in (0.64 cm) thick outline around your sketch first (using a circular saw). Then, you may have to manually chisel the stucco so you can access and cut away the chicken wire underneath. [13]
  7. Even with careful measurements, your exterior opening might not be the exact same size as the interior opening. Make small adjustments with a handheld electric saw until both openings are totally even. [14]
    8. Advertisement
Part 3
Part 3 of 3:

Installing the Wall Sleeve and AC

PDF download Download Article
  1. Measure both the length and height of your wall opening. Then, cut out two 2 by 4 in (5.1 by 10.2 cm) planks that match this length measurement, and another 2 that match the height. Position these 4 planks inside of the wall opening and nail them into place. [15]
    • If you’re having trouble nailing the frame together, use corner brackets or wood glue instead.
  2. If you have a disassembled sleeve, put it together by connecting all 4 sides and following the directions on the packaging. Slide the sleeve into the opening so the edges are flush against the inside of your wall. [16]
    • The wall sleeve comes with your AC unit.
  3. Lift the air conditioner and place the end into the wall sleeve. Push on the front of the unit to slide it into the sleeve. If it’s a tight fit, wiggle the unit as you push to help slide it into place. [17]
    • Some air conditioning units may come with a frame-like border that goes around the front of the device.
  4. If there’s a gap between your air conditioning unit and the sleeve, it can affect how well your unit functions. Take strips of foam insulation and stuff them into the space to help seal it. [18]
    • You can find strips of foam at your local hardware or home improvement store.
    • This is a good time to make any repairs and fixes to your interior drywall, too.
  5. Caulk around the outside portion of the sleeve to seal it in place. Squeeze a line of silicone-based caulk along the edges and in any holes or gaps and allow it to fully dry to create a tight seal. [19]
    • Check the package of the caulk for specific drying times and wait until the caulk has fully dried and hardened before you install your air conditioning unit.
    • At this point, you can turn the power back on.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Do through-the-wall air conditioners need a sleeve?
    Victor Belavus
    Air Conditioning Specialist
    Victor Belavus is an Air Conditioning Specialist and the Owner of 212 HVAC, an air condition repair and installation company based in Brooklyn, New York. In addition to HVAC and air conditioning units, Victor also specializes in furnace repair and air duct cleaning. He has over 10 years of experience working with HVAC systems.
    Victor Belavus
    Air Conditioning Specialist
    Expert Answer
    Yes, for a safe and proper installation, all through-the-wall air conditioners need a sleeve. It also protects the inside of your walls from condensation and makes it easier to insulate gaps.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 4
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Things You’ll Need

      • Measuring tape
      • Stud finder
      • Pencil
      • Level
      • Work gloves
      • Dust mask
      • Safety glasses
      • Utility knife
      • Reciprocating handsaw
      • Drill
      • Circular saw
      • Four 2 by 4 in (5.1 by 10.2 cm) planks
      • Nails
      • Hammer
      • Air conditioner sleeve
      • Foam insulation
      • Silicone-based caulk
      • Chisel (optional)
      • Drywall knife (optional)


      Tips

      • For the highest quality installation, hire a professional to do the job. They’ll be able to cut out your wall and seal any gaps so your unit is running as smoothly and efficiently as possible. Costs can vary depending on how long it takes to get the job done, but generally, costs are below $300. [20]
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Make sure you don’t cut through any plumbing or electrical wiring in your wall. It could cause an expensive mess.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Install a Water Softener
      How to
      Install Wood or Concrete Dock Posts in the Water
      How to
      Fish Wires Through a Conduit or Pipe
      How to
      Replace the Batteries in Most Models of Honeywell Thermostat
      How to
      Install a Split System Air Conditioner
      How to
      Use a Vacuum Pump
      How to
      Clean Split Air Conditioners
      How to
      Measure Airflow
      How to
      Install a Portable Air Conditioner
      How to
      Clean & Maintain a Window Air Conditioner
      3 Easy Ways to Reset an Air Conditioning Unit That’s Not Working
      How to
      Install a Condensate Pump
      How to
      Clean the Filter on Your Air Conditioner
      How to
      Put Freon in an AC Unit
      Advertisement

      References

      1. ↑ https://todayshomeowner.com/conditioners-from-maintenance-buying/2/
      2. ↑ https://mrgrabbar.com/blogs/grab-bar-installation-tips-and-tricks/the-ultimate-guide-to-using-a-stud-finder-like-a-pro?srsltid=AfmBOor3PmDrx5_4EWzI9mRrWXfUqnM1h07QTO5InDEolZaSpVp4rw_V
      3. ↑ https://mrgrabbar.com/blogs/grab-bar-installation-tips-and-tricks/the-ultimate-guide-to-using-a-stud-finder-like-a-pro?srsltid=AfmBOor3PmDrx5_4EWzI9mRrWXfUqnM1h07QTO5InDEolZaSpVp4rw_V
      4. ↑ https://www.hvachowto.com/how-to-install-a-through-the-wall-air-conditioner-sleeve/
      5. ↑ https://americanhomewater.com/through-the-wall-air-conditioner-installation/
      6. ↑ https://www.hvachowto.com/how-to-install-a-through-the-wall-air-conditioner-sleeve/
      7. ↑ https://www.thisoldhouse.com/insulation/21019234/cutting-batts-of-fiberglass-insulation
      8. ↑ https://www.hvachowto.com/how-to-install-a-through-the-wall-air-conditioner-sleeve/
      9. ↑ https://americanhomewater.com/through-the-wall-air-conditioner-installation/
      1. ↑ https://www.hvachowto.com/how-to-install-a-through-the-wall-air-conditioner-sleeve/
      2. ↑ https://www.youtube.com/watch?v=A_R71xYPyks&t=1m15s
      3. ↑ https://www.youtube.com/watch?v=-WbVOjYuhuk&t=1m3s
      4. ↑ https://www.youtube.com/watch?v=-WbVOjYuhuk&t=1m12s
      5. ↑ https://www.youtube.com/watch?v=AJnHfe0tcnY&t=6m35s
      6. ↑ https://www.youtube.com/watch?v=-WbVOjYuhuk&t=1m56s
      7. ↑ https://www.youtube.com/watch?v=AJnHfe0tcnY&t=7m53s
      8. ↑ https://www.youtube.com/watch?v=JA8UgDNommI&t=6m20s
      9. ↑ https://www.youtube.com/watch?v=A_R71xYPyks&t=3m14s
      10. ↑ https://www.youtube.com/watch?v=A_R71xYPyks&t=3m33s
      11. ↑ https://www.thisoldhouse.com/heating-cooling/21015186/how-to-choose-an-air-conditioner

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 306,453 times.

      Reader Success Stories

      • Reneda Baer

        Mar 20, 2016

        "First, I wasn't even sure what a "through the wall" unit even was or how much work/knowledge would ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement