Download Article
Download Article
Using abrasive methods such as sandpaper to remove oxidation from polycarbonate headlight lens is a big mistake if you only have a little bit of oxidation. You don't use a chainsaw to trim the hedges. You must use the least abrasive method first.
The modern projector headlight lens is made of POLYCARBONATE, a high impact form of acrylic. Understand that the two materials are similar and have similar applications such as in eye glasses. Polycarbonate is strong and impact resistant, and therefore used on headlights to withstand rocks and pebbles, but yellows under UV light without a protective UV coating. Manufacturers use a thin hardcoat silicone as a protective coating. This coating is damaged over several years if exposed to lots of sunlight, If you have neglected the headlights and allowed the UV coating to deteriorate, you will have to find a coating that has similar properties to the original hard silicone coating. Using a deoxidizer can remove oxidation but it cannot replace or repair a damaged Ultra Violet layer.
Steps
Download Article
-
If we take this from a scientific approach we must look at the problem as a doctor would when he diagnosed a problem. Is the problem oxidation? Or is it something else? [1] X Research source -
Understand oxidation. Oxidation is a flat opaque covering that lays evenly on the surface of the lens, It will start out white turn yellow and eventually brown. It can build up and block all light from leaving the lens. It is semi-smooth to the touch.- If your headlights are damaged, even a deoxidizer will not help. At that point, your headlight's UV coating is already fully damaged and the polycarbonate is exposed to the elements. It is the nature of polycarbonate to turn yellow under UV light. Sealing the surface with a non yellowing layer will prevent the polycarbonate from turning yellow.
Advertisement -
Understand surface damage. This consists of obvious visual imperfections on the lens, such as chipping, scaring, scratching and damage caused by the use of a sandpaper type cleaning process.- After market sealers are the also a problem. These sealers are generally polyurethane or acrylic based. They have no yellow stopping UV protection. Over time the heat from the bulb and the light from the sun will cause them to yellow and crack. However, UV stabilized hardened clear coat paint will not yellow and crack. There are a few other coatings that supposedly do not yellow, such as certain epoxies. Be careful what type of clear coating you buy. It might be too late for you now, but the key is to preserve the UV coating with waxes and sealants when you still have a substantial UV coating left.
-
Consider your removal options. Once it can be determined if the problem is oxidation or surface damage, you must next decide a method of treatment.- 90% of headlights that need cleaning are afflicted with oxidation and do not need sandpaper, so don't jump to the most aggressive solution. The other 10% have actual surface damage which will need sandpaper.
- If surface damage is your problem stop here. There is no process that will restore your lens. They will have to be resurfaced and that will require the use of abrasives and power tools.
-
If your problem is oxidation you can restore your headlight lens in seconds without fear of damage to the delicate UV layer with a non abrasive DE-oxidizer, which uses a non-abrasive chemical cleaner to remove light to heavy oxidation.
Advertisement
Video
Community Q&A
Search
-
QuestionWhere can I buy the deoxidizer?Community AnswerThere is only one company that makes a non-abrasive headlight deoxidizer - the Pittman Original One Step ALR. It can be purchased online world wide from their website.
-
QuestionIs it necessary to clean an interior of a headlight or is just cleaning the exterior enough?Community Answer99 percent of the discoloration of most headlights is on the outer surface unless your headlights are fogging up or have ever filled with water, so exterior cleaning should be enough.
-
QuestionWhat is the easiest/most efficient way to remove oxidation from my vehicle?Community AnswerYou can use bug spray with around 25% DEET. DEET is the quickest and most efficient way to clean oxidation from headlights, as it will melt the headlight plastic and its oxidation. Bug spray with DEET will clean your hazy, oxidated headlights when really needed, and it will keep them clean around a week.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Oxidation can be removed with a deoxidizer but the surface damage will remain.Thanks
- Oxidation is a naturally reoccurring factor. It will rebuild on a surface it has been removed from, therefore the headlight lens must be sealed with another product after oxidation removal to help prevent recurrence of oxidation.Thanks
- All deoxidizers are not the created equal. In fact most are not true deoxidizers they are polishes and rubbing compounds. A true deoxidizer reacts at a molecular level and removes oxidation on contact.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Microfiber cloth
- Scratch/swirl remover/polish, oxidation remover.
- Wax or sealant
About This Article
Thanks to all authors for creating a page that has been read 446,632 times.
Reader Success Stories
- "Revealing the true coating material on headlights was very useful. The information further helped me to understand the wrong and damaging effect of many cleaners that I would have tried." ..." more
Advertisement
"Revealing the true coating material on headlights was very useful. The information further helped me to understand the wrong and damaging effect of many cleaners that I would have tried."
..."
more
"I just went outside and used Deep Woods Off on my 2001 Prius headlights. 3 minutes later they look like new! What a difference - I had never deoxidized them in 17 years!"
..."
more
"The explanation was easy to understand."
