Download Article
Download Article
All vehicles with a manual transmission will have a friction clutch between the engine and gearbox, allowing the driver to pull away from a standstill and change gears. Clutches are hard wearing, but do need periodic replacement as the clutch wears down.
Get Car Support Solve Any Problem
Try Asking:
We’re sorry we don’t support the car you are looking for. Please enter its make, model, and year below so that we can add support for it.
Thank you! We’ll review your request and add support for this product as soon as possible. In the meantime, you can ask more questions about the products we currently support.
Steps
Download Article
-
Identify the symptoms of a worn clutch. Usually this is characterised by the clutch slipping as you apply power — the engine speed will increase greatly when you try to accelerate, even though the clutch pedal is not pressed. Under normal driving, a healthy clutch will 'lock' the engine to the transmission, so its speed should be directly linked to changes in the vehicle speed. [1] X Research source -
Make sure the clutch itself is at fault. If your vehicle has a hydraulically-operated clutch, eliminate air in the system by bleeding the hydraulic circuit, as you would with the braking system. [2] X Research source A cable-operated clutch could be suffering from a seized or jammed cable, preventing the clutch from taking the full torque from the engine. [3] X Research sourceAdvertisement -
Have the clutch replaced as soon as possible. Clutch replacement is an involved job, requiring removal of the transmission to access the clutch. Unless you are an experienced home mechanic, book your car into a garage to have the work done. [4] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- A sure fire way to know your clutch is worn out, select 3rd or 4th gear at around 30Mph/55Kph with the clutch engaged, and open the throttle wide (hit the gas). If your engine starts revving at high RPM and vehicle is not picking up speed, the clutch plate is worn out. The engine revs over because the clutch does not have enough contact with the flywheel, causing slip.Thanks
- Don't drive the car with a worn clutch. Fuel economy and available power will be reduced, and the clutch could fail completely at any time, leaving you stranded by the roadside.Thanks
- Clutch replacement is time-consuming, involving removal of the transmission. While on a rear-wheel-drive vehicle this may be relatively simple, on a front-wheel-drive or four-wheel-drive vehicle the task is more difficult. Because of this, it's good practice to change the clutch whenever the gearbox is removed from the vehicle. This can save time and money in the long run, especially if you are having a garage do the work.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
About This Article
Thanks to all authors for creating a page that has been read 339,353 times.
Reader Success Stories
- "I had never bled a clutch before, only brake systems. I learned a lot just reading through your instructions before bleeding the system. Thank you!" ..." more
Advertisement
"I had never bled a clutch before, only brake systems. I learned a lot just reading through your instructions before bleeding the system. Thank you!"
..."
more
"It helped me a lot. Now I know what to check first before a garage tries to overcharge me for something simple."
"My success story is I now know I need a new clutch!"
"Everything helped me, thanks a lot."
"Perfect and practical knowledge."
