Download Article
Download Article
If you need to provide shelter for animals or space to store outdoor equipment, you may consider building a pole barn. Pole barns cost less than other structures and don't take long to build. Laying out a pole barn is an important step in the construction process, and if done properly, will ensure a sturdy building.
Steps
Download Article
-
Decide on the size of your building.- Consider what you plan to use the building for and how much room you require. Select the height, width and length of the project before laying out a pole barn.
- Make blueprints of the barn or purchase a pre-measured pole barn kit. Every 12 feet (3.66 m) of length needs to have a 4 inch (10.16 cm) by 4 inch (10.16 cm) post as a brace when setting up a pole barn. [1] X Research source
-
Select a location for the construction. You need to find a dry, level spot to set up a pole building. If the area is not level, you will need to smooth it out. [2] X Research sourceAdvertisement -
Measure out the area according to the blueprint with a measuring tape, or follow instructions from pre-measured kit. Use string to mark out the basic diagram of the building. -
Lay out the 4 inch (10.16 cm) by 4 inch (10.16 cm) posts 12 feet (3.66 m) apart. To set up a pole building, you want your foundation posts measured correctly. -
Dig holes at least 3 feet (91.44 cm) deep for each post with a shovel, posthole digger or backhoe. [3] X Research source -
Set each post into a hole and then fill them with concrete. If you plan to set up a pole building bigger than 24 feet (73.15 m) by 24 feet (73.15 m), you may want to hire a cement truck and have them pour the concrete. -
Level the posts by holding a level alongside the post. When laying out a pole barn, you want the posts to stand perpendicular, or at a 90 degree angle from the ground. [4] X Research source -
Square the posts with a guide wire to ensure the posts line up properly. After you set up your first pole, use it as a key post in the rest of the framing. When you are laying out a pole barn, you need to adjust the posts before the concrete dries. Let the concrete set for 24 hours. -
Haul in sand to the site and spread it inside the barn area up to 18 inches (45.72 cm) deep. This will keep the barn floor warm and dry. -
Set the wall poles next to the construction site. When setting up a pole building, you want the material close to where it will be installed, so lay out the walls on the ground before you hang them. -
Put the roofing materials next to the laid-out walls. After you have finished setting up a pole barn, you can begin construction.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Some areas require that you get a building permit before you construct a barn. Check with your local building agency before you set up a pole building.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Blueprints or pre-measured barn kit
- Measuring tape
- String
- 4 inch (10.16 cm) by 4 inch (10.16 cm) posts
- Shovel, posthole digger or backhoe
- Cement
- Level
- Guide wire
- Sand
- Wall posts
- Roofing material
References
About This Article
Thanks to all authors for creating a page that has been read 89,616 times.
Advertisement
86%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
