How to Life Cast

PDF download Download Article
PDF download Download Article

Life casts can look impressively realistic, so you might be surprised how easy they are to do yourself. We'll walk you through this fun, in-depth process so you can try your hand at making your very own creation!

Part 1
Part 1 of 3:

Mixing and Applying the Molding Material

PDF download Download Article
  1. Life casting requires a variety of supplies, which you will probably need to get from a special effects company or art supply store. Some companies even sell kits with everything you need for life casting. [1] Do not attempt to life cast without the required materials or you will not be able to complete the process properly. You will need: [2]
    • Alginate powder. This is what you will mix up to form the molding material. Choose a product made for life casting. If you will be life casting a person's teeth, then make sure to get dental alginate. You will need more alginate if you are casting a large area of a person's body, and less if you are casting a small area. For a large project, you would need about 1.5 pounds, such as for a full adult torso cast. However, for something very small, such as a baby's hand casting, you would only need about 3.5 ounces. [3]
    • Plaster bandages (similar to the ones a doctor would use to make a cast). You will need more or less bandages depending on the type of cast you are doing. For something like a full head casting, you might need around 7 rolls of plaster bandages. For something like a half-torso casting, you might only need 3 rolls. [4]
    • Plaster. The amount of plaster you will need will depend on the part of the person's body you are casting. For a full front torso casting, you would need between 8 to 10 pounds. For something small, such as a baby's hand, you would need about ½ of a pound. [5]
    • Large paintbrushes.
    • Buckets for mixing materials.
    • Wooden sticks for stirring the materials.
    • A bald cap (optional, needed for life casting a person's head only).
    • Safety scissors (for casts that go around an entire portion of the body, such as a full head cast).
  2. Making a life cast of a part of a person's body is much easier with help. You will need to apply the molding material rather quickly and you may also need to mix up multiple batches, so having one or two people available to assist you will make the process much easier.
    Advertisement
  3. Before you begin, make sure that the area you want to life cast is completely bare. Have the person remove all clothing from the area and any jewelry that might get in the way.
    • If you will be life casting someone's head, then make sure to cover their hair with a bald cap first. There are mold formulas meant for people with facial hair, but the molding material will get stuck in head hair, so cover the person's head completely with a bald cap. [6]
  4. Follow the manufacturer's instructions for mixing the alginate to form the molding material. Most of these mixes set up quickly, so you will need to be ready to apply them as soon as they are mixed.
  5. Use a large paintbrush to apply the molding material to the part of the person's body that you will be casting. You will likely need to apply three or more layers to ensure an even cover. The molding will set up quickly, but don't wait for each layer to dry fully to apply the additional layers. Just apply them one after the other. The molding material should be nice and thick when you are done.
    • Be very careful not to cover the person's nostrils when applying the molding material to someone's face. It is important to leave the nostrils free of silicone so that they can still breathe during the process. [7]
    • The molding will set quickly—within 3 to 8 minutes depending on the type. If the alginate does not seem firm, then wait a few more minutes for it to set before applying the plaster bandages over it.
  6. When the alginate molding is set, begin dipping the plaster bandages in water to wet them and then start to apply them over the molding layer. Apply a few layers of bandages over the entire area that is covered with molding. Depending on the area, you may need to cut some of the strips to fit details of the area, such as around the nose and mouth for a face casting.
    • Remember to keep the nostrils clear if you are applying the plaster to someone's face. [8]
    7. Advertisement
Part 2
Part 2 of 3:

Removing the Casing and Mold

PDF download Download Article
  1. The plaster bandages will begin drying after only a few minutes. However, it will take longer than this for all layers of the bandages to dry and some products may dry more quickly or slowly. Check the manufacturer's instructions for how long to leave the casing in place to be sure.
  2. Once the plaster bandages are dry, carefully remove the casing they have created from the person's body. Even if the casing is dry, it may still crack or chip, so be very careful as you remove it.
    • If you only placed the casing on half of the person's body, such as the front side of their torso or one side of their hand, then you should be able to loosen the edges with your fingertips and then slowly lift the casing away.
    • If you placed a cast on a full area, then you may need to break the casing into two pieces. Use a tool, such as a flat edge screwdriver, to carefully separate the two sections.
  3. The alginate molding is the last thing that you will need to remove. If you have placed the molding over an entire portion of the body, then you will need to use safety scissors to cut it off.
    • Cut across one low detail area of the molding, such as the back of the head, using a zig zag pattern. This will help to make it easier to realign the molding when you are ready to fill it with plaster for the life cast. [9]
    4. Advertisement
Part 3
Part 3 of 3:

Making the Plaster Cast

PDF download Download Article
  1. After you have removed the plaster casing and mold, you can begin making your plaster cast. To get started, realign the edges of the mold if you had to cut it. Then, place the mold inside of the plaster casing. [10]
    • You may need to use screws to hold the plaster in place if you did a full portion of a person's body, such as a full head cast. Do not screw in the screws all the way or you may crack the plaster and penetrate the mold.
  2. You will need to position the mold so that you can easily pour the plaster into it and so that the plaster will stay put. Find a level surface where the plaster will not be disturbed and that is away from pets and small children.
    • If you have a cast of one side of a person's body, place the mold in its casing on a level surface with the mold side facing up.
    • If you made a full cast of a body part, such as of a person's head, hand, or foot, then place the mold upside down in an empty bucket. [11]
  3. Mix the plaster after your mold is ready to be filled with the plaster. The plaster will begin to set right away, so it is important to use it right after you mix it. Make sure that you do not agitate the plaster too much or it will create air bubbles. [12]
  4. When the plaster is mixed, slowly begin pouring it into the mold. Only fill the mold about halfway at first so that you can use your hand to release any air bubbles if needed. Then, slowly pour in the rest of the way and stir with your hand again to release air bubbles if needed. [13]
    • Make sure to wash the plaster off of your hand after you stir to release any air bubbles.
  5. The plaster will need to dry overnight or possibly longer. Do not disturb the plaster at all during this time. It will look matte and feel hard when it is completely dry.
  6. When the plaster is completely dry, you can remove the outer casing and then remove the mold. Go slowly since the mold may tear if you go too quickly. You can reuse the mold a few times before it will begin to break down, so be extra cautious if you plan to reuse it. [14]
    • If there are any rough edges, use a piece of fine grit sandpaper to even them out.
    7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Is this plaster safe and non-toxic?
    Mark Weiser
    Artist
    Mark Weiser is an Artist and Gallery Manager for DKW Art Gallery based in Marion, Iowa. He and his wife Deb manage the gallery, which boasts a variety of art, including paintings, ceramics, and photography. The gallery also provides art classes for the community, hosts shows, and runs events that build awareness of regional artists of all ages. Mark has also owned and operated art galleries in Florida and Georgia. He creates carved slate and wood pieces inspired by Irish and Celtic art, featuring the Gaelic language done in the ancient Ogham alphabet. Some of Mark's previous clients include CNN, Pinnacle Bank, and Collins Aerospace. He received a BS in Business Administration with minors in Education and Psychology from Emporia State University.
    Mark Weiser
    Artist
    Expert Answer
    Yes, but make sure to use alginate powder. It’s safe for your skin and doesn’t have any harmful chemicals when mixed correctly. People often use alginate for dental molds or face casting because it’s gentle on the skin and sets quickly. Don’t use regular plaster directly on your face—it can get hot while it sets and might burn or irritate your skin. Always work in a place with fresh air and ask a friend to help so everything goes smoothly.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    Can a kid do this if they don't have claustrophobia?
    Alex Grider
    Community Answer
    Yes, you can even life cast a baby! Adult supervision is required to make sure the alginate is properly mixed (among other reasons).
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    How does the plaster you pour in not stick to the plaster mold?
    Alex Grider
    Community Answer
    Only the outside of the mold is plaster. The inside, which has the facial details, is alginate. That does not stick to plaster. The plaster is just there for support.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      • Alginate powder
      • Plaster
      • Plaster bandages (like the ones a doctor would use to make a cast)
      • Large paintbrushes
      • Buckets
      • Wooden sticks
      • A bald cap (optional, for casting a person's head only)
      • Safety scissors

      You Might Also Like

      How to
      Sculpt Clay
      How to
      Sculpt a Face
      How to
      Make a Sculpture
      How to
      Make a Soap Carving
      How to
      Scrimshaw
      How to
      Make Mannequin Heads
      How to
      Sculpt
      How to
      Sculpt With Concrete
      How to
      Make a Latex Mold
      How to
      Make a Rubber Mold
      How to
      Craft Wax Hands at Home
      How to
      Use a Chisel
      How to
      Sculpt Using Polymer Clay
      How to
      Mix Plaster for Sculpture
      Advertisement

      References

      1. ↑ https://www.monstermakers.com/product/pro-full-head-lifecast-kit.html
      2. ↑ https://www.youtube.com/watch?v=V3rxHJPOWHg
      3. ↑ https://accu-cast.us/how-much-alginate-do-i-need/
      4. ↑ https://accu-cast.us/how-many-plaster-bandages-do-i-need/
      5. ↑ https://accu-cast.us/how-much-liquistone-do-i-need/
      6. ↑ https://www.youtube.com/watch?v=V3rxHJPOWHg
      7. ↑ https://www.youtube.com/watch?v=V3rxHJPOWHg
      8. ↑ https://www.youtube.com/watch?v=V3rxHJPOWHg
      9. ↑ https://www.youtube.com/watch?v=V3rxHJPOWHg
      1. ↑ https://www.youtube.com/watch?v=jz4BUlrfhxQ
      2. ↑ https://www.youtube.com/watch?v=jz4BUlrfhxQ
      3. ↑ https://www.youtube.com/watch?v=jz4BUlrfhxQ
      4. ↑ https://www.youtube.com/watch?v=jz4BUlrfhxQ
      5. ↑ https://www.youtube.com/watch?v=jz4BUlrfhxQ

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 55,166 times.

      Reader Success Stories

      • Anonymous

        Sep 21

        "It gave me direct info on my project."
      Share your story

      Did this article help you?

      Advertisement