Download Article
Download Article
Concrete is a building material that's comprised of fine and coarse materials bound together with cement. If you need to do improvements on your home, you may want to make some concrete yourself. To create your own concrete, you’ll need to make or purchase cement and mix it with other materials to create a soft concrete that you can work with. Alternatively, you can purchase pre-mixed concrete and add water to create workable concrete. Regardless of what you decide to do, creating concrete is easy as long as you have the right materials and tools.
Easiest Way to Make Your Own Concrete
Purchase a bag of pre-mixed concrete at your local hardware store or lumberyard. Empty the concrete into a wheelbarrow and follow the instructions on the bag to add the right amount of water. Use a hoe or shovel to stir the concrete mix and water together, working out any lumps until it’s as smooth as possible.
Steps
-
Crush limestone into 3-inch (7.62 cm) pieces. Purchase or find limestone on your property and crush it up into small, 3-inch (7.62 cm) pieces with a sledgehammer. You can tell if the stone is limestone if it fizzles or cracks when you put vinegar on it. [1] X Research source- Industrial grade limestone companies use mechanical crushers or hammer mills to crush the limestone.
- You can also buy limestone-based Portland cement online, at hardware stores, or at home and gardening centers instead of making it yourself.
-
Put the limestone in a kiln and raise the heat to 2,700°F (1482.2°C). Preheat the kiln and put your limestone into it. Let the kiln heat the limestone for 3 to 4 hours at 2,700°F (1482.2°C). Use a high-temperature kiln thermometer to determine the level of heat in the kiln. Make sure to wear a respirator and goggles when heating the limestone because it will let off a harmful gas. [2] X Research sourceAdvertisement -
Crumble up the pieces of heated limestone once it cools. Let the limestone cool for an hour or two before handling it. Point a fan towards the stone to speed up the cooling process. Wear thick rubber gloves when handling the limestone. Transport the limestone to a wheelbarrow and then use a shovel to break up the limestone pieces until it turns into a fine dust. [3] X Research source
Advertisement
-
Mix two parts all-purpose sand to one part of cement. Mix either fine or coarse all-purpose sand with the cement in a wheelbarrow with a shovel. You can buy all-purpose sand online or at a hardware store. If you have access to a concrete mixer, you can use that instead of a shovel and wheelbarrow. Add two parts of sand for every one part of cement dust that you have and make sure that they are well incorporated. [4] X Research source- If you are trying to make more than 80 lbs (36.28 k) of concrete you should rent a portable concrete mixer instead of trying to mix it by hand. [5] X Research source
-
Add four parts of gravel or crushed brick to the mixture. Add four parts of gravel or crushed brick for every one part of cement. This coarse material will help bind the concrete together once it dries. If you want a smoother concrete finish, you should use smaller pieces of gravel or crushed brick. Continue to mix all the dry ingredients together to create your concrete mixture. [6] X Research source -
Slowly add water to the dry ingredients. Fill a 5-gallon (18.9 l) bucket ¾ of the way with water and pour the water into the dry ingredients. Pour slowly so that the water doesn’t splash around, mixing in between and adding more concrete. [7] X Research source -
Mix the cement together. Use a hoe or a shovel to mix the water and dry concrete mixture together. Continue to stir the concrete mixture together until it’s stiff. If the concrete is still dry and crumbly, you need to add more water. [8] X Research source- To make sure your concrete cures well, pour the concrete in the morning and wet it throughout the day if it's going to be a very hot day. [9]
X
Expert Source
Gerber Ortiz-Vega
Masonry Specialist Expert Interview. 10 March 2020.
- To make sure your concrete cures well, pour the concrete in the morning and wet it throughout the day if it's going to be a very hot day. [9]
X
Expert Source
Gerber Ortiz-Vega
-
Wash off your mixing tools. Use a hose on the strongest setting to spray your tools and blast away any remaining concrete before it sets. If there's anything left after you spray, use a wire brush to remove the last bits. [10] X Expert Source Gerber Ortiz-Vega
Masonry Specialist Expert Interview. 10 March 2020.
Advertisement
-
Purchase a bag of pre-mixed concrete. You can get pre-mixed concrete at home centers, lumberyards, and at hardware stores. Once you get the concrete, read the directions on the back of the bag so that you know how much water you need to mix with the concrete dust. [11] X Research source- An 80 lb (36.28 kg) bag of concrete will fill up .6 cubic feet of space. [12] X Research source
- You may want to rent a small powered mixer.
-
Empty the bag of concrete in a wheelbarrow. Place the bag of concrete into a wheelbarrow and use a hoe or a shovel to cut the bag in half. Lift off both sides of the bag and empty out the contents into the wheelbarrow.- Instead of a wheelbarrow, you could use a concrete tray.
-
Slowly add water to the concrete mix. Fill up a bucket with the amount of water that you need according to the instructions on the back of the bag. Slowly pour the water into the mix. [13] X Research source- Be careful not to pour in too much water into the concrete mix. You can always add more, but you can't take away what you've already put in. [14]
X
Expert Source
Gerber Ortiz-Vega
Masonry Specialist Expert Interview. 10 March 2020.
- Be careful not to pour in too much water into the concrete mix. You can always add more, but you can't take away what you've already put in. [14]
X
Expert Source
Gerber Ortiz-Vega
-
Mix the concrete together. Use a hoe, shovel, or powered mixer to mix the concrete mix with the water until it’s the consistency of peanut butter. Work out any lumps until the concrete is as smooth as possible. [15] X Research source -
Clean off your mixing tools. Once you’re done mixing the concrete together, it’s important that you hose off anything that has concrete paste on it. It will be harder to remove the concrete once it dries.
Advertisement
Expert Q&A
Search
-
QuestionWhat are the 4 main ingredients in concrete?Gerber Ortiz-Vega is a Masonry Specialist and the Founder of GO Masonry LLC, a masonry company based in Northern Virginia. Gerber specializes in providing brick and stone laying services, concrete installations, and masonry repairs. Gerber has over four years of experience running GO Masonry and over ten years of general masonry work experience. He earned a BA in Marketing from the University of Mary Washington in 2017.Concrete is a mixture water, cement, sand and gravel. If you are making conrete from scratch, you will be mixing these four compounds.
-
QuestionHow many parts of water should I use with one part cement, and two or three parts of fine sand?Community AnswerUse 2 parts water, that way the final mixture isn't too grainy or over-watered.
-
QuestionCan I use "quick Crete" for setting a steel mailbox post?Community AnswerYes. Quick-Crete is pre-mixed concrete and is strong enough to hold up a mailbox post.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You’ll Need
- Limestone
- Respirator
- Thick rubber gloves
- Eye protection
- Kiln
- Fan
- Bucket
- Hose
- Water
- Sand
- Gravel or crushed brick
- Hoe or shovel
- Concrete mixer (optional)
- Pre-mixed concrete
References
- ↑ http://www.cement.org/cement-concrete-basics/how-cement-is-made
- ↑ http://www.cement.org/cement-concrete-basics/how-cement-is-made
- ↑ http://www.understanding-cement.com/manufacturing.html
- ↑ http://www.madehow.com/Volume-1/Concrete.html
- ↑ https://www.lowes.com/n/how-to/mix-concrete-by-hand
- ↑ http://matse1.matse.illinois.edu/concrete/bm.html
- ↑ http://matse1.matse.illinois.edu/concrete/bm.html
- ↑ https://www.irvmat.com/kids/makeConcrete.htm
- ↑ Gerber Ortiz-Vega. Masonry Specialist. Expert Interview. 10 March 2020.
- ↑ Gerber Ortiz-Vega. Masonry Specialist. Expert Interview. 10 March 2020.
- ↑ https://www.familyhandyman.com/masonry/pouring-concrete/how-to-properly-mix-concrete/view-all
- ↑ https://www.lowes.com/n/how-to/mix-concrete-by-hand
- ↑ http://www.sakrete.com/blog/mixing-concrete
- ↑ Gerber Ortiz-Vega. Masonry Specialist. Expert Interview. 10 March 2020.
- ↑ https://www.lowes.com/n/how-to/mix-concrete-by-hand
About This Article
Article Summary
X
To make your own concrete from limestone cement, mix 2 parts all-purpose sand to 1 part cement in a wheelbarrow with a shovel or in a cement mixture. Mix in 4 parts of gravel or crushed brick to the mixture, then slowly add water into the dry ingredients. Mix the water and dry concrete mixture together until it’s stiff, then thoroughly spray off your mixing tools so the concrete doesn’t harden on them. Keep reading for tips from our contracting reviewer on how to make your own limestone cement!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,469,633 times.
Reader Success Stories
- "Most helpful for me. Understanding the term "slump", the slump dictates the amount of water added. Could not quite put together in my mind the test for slump, understanding the concept, mix and learn." ..." more
Advertisement
"Most helpful for me. Understanding the term "slump", the slump dictates the amount of water added. Could not quite put together in my mind the test for slump, understanding the concept, mix and learn."
..."
more
"I had forgotten the ratio to mix concrete with only sand for patching walls. Here in Brazil, houses seldom use wood for wall structures, but instead, concrete blocks. "
..."
more
"I needed to know just how thick I needed the cement to be to put on my cement porch, and now I know it needs to be at least one inch thick."
..."
more
"Very comprehensive, but simply explained instructions with clear animations. The ratios to be mixed were useful."
"For teaching purposes. To teach theme-related vocabulary to civil-engineers."
