How to Make Felt Slippers

Co-authored by Andrea Beaulieu

Last Updated: February 16, 2023 Approved

Winter is one of the best times of the year. Hot chocolate, sledding, and fireplaces are all symbols of the season, but there is one problem that can get on the nerves of many people all across the globe: cold feet. Slippers are a great way to keep your feet warm, but they can wear out quickly. Luckily, it is easy to make a pair of inexpensive, soft, and warm slippers out of felt that will go perfectly with your fireplace. Best of all, there are several different ways of making felt slippers, each with their own style.

Method 1

Method 1 of 3:

Making a Basic Slipper

Download Article

This will create the sole of your slipper. Both sheets can be the same color, or two different colors. You can use plain felt from the arts and crafts store, but you'll get a nicer-looking and longer-lasting slipper if you use 5-millimeter thick felt from the fabric store instead.
Make sure that you don't trace too far under your arch. To prevent this from happening, look down at your foot while you are tracing it. If you can't see what you are drawing, you are going too far under the arch. Make the lines and curves as neat as you can.

Advertisement
Instead of tracing your foot again for the other slipper, simply trace the sole you just cut out onto more felt, and cut that out too. You want to end up with four foot shapes, two for each sole.
Start tracing from the inside of your arch, all the way around your toes, and finishing at the other side of your foot. Remember to draw over the top of your foot as well.
If you'd like to save some time, cut two pieces of felt at the same time. This will give you the toe piece for your other slipper.
Pin the toe piece to one of the sole pieces first, making sure that the edges meet up; the toe piece will bubbly up a bit. Next, pin the other sole piece on top, sandwiching the toe piece in between.
7
Sew around the slipper using a ¼-inch (0.64-centimeter) seam allowance. Leave a 2-inch (5.08-centimeter) wide hole at the bottom of the heel so that you can turn the slipper.
- To prevent bunching, cut little notches or slits into the toe area of your slipper. Be careful not to cut through the stitching, however.
If you need to, use a long, thin tool, like a knitting needle, to push out the curves and seams.
If you'd like to use batting, cut a sole-shape out of polyester quilt batting, and slide it into the sole. If you are using stuffing, simply fill the slipper with it, making it fuller in the arch area.
You can do this using a sewing machine and a straight stitch for something quick and simple. You can also fold the edges in by ¼-inch (0.64-centimeter), and sew them shut with a ladder stitch for a seam-less finish.

Method 2

Method 2 of 3:

Making a Rustic Slipper

Download Article

1
Place your foot down on a piece of paper, and trace around it using a pencil. When you are done, take the paper away, and set it aside. You only need to trace one foot, because you can easily flip the pattern over.
- Avoid going too far under your arch. To prevent this from happening, look down at your foot while you are tracing it; if you can't see what you are drawing, you are going too far under your arch.
Use a thin, flexible piece of paper for this; a cheap fabric, such as muslin, would also work.
Start tracing at the arch, and finish tracing on the other side of your foot. This will create the top pattern piece.
4
Trace around your patterns with a pen, leaving a ¼-inch (0.64-centimeter) seam allowance. Your original pattern lines probably look very sketchy, especially for the top pattern piece. This won't give you very nice slippers. Smooth and straighten your paper out, then carefully trace around the lines you drew, leaving behind a ¼-inch (0.64-centimeter border). Make the curves as neat as possible.
- If you added bumps for your toes, be sure to omit them for the final pattern.
5
Cut your pattern pieces out, pin them together, and try them on. This is your chance to make any necessary changes. If the pattern is too small, or doesn't fit right, you will need to make another one. If the pattern is too big, cut it down a little bit smaller, and try it again. If the pattern fits just right, you are ready to move on!
- Pin the pattern together ¼-inch (0.64-centimeters) from the edge.
6
Pin the patterns to your felt and cut out the pieces. You can use plain felt from the arts and crafts store, but nice, 5-millimeter thick felt will not only last longer, but it will look and feel better too. Remember to reverse the pattern for your other foot. Here's what you need to cut:
- Sole: 2 pieces per slipper. They can be the same color or contrasting colors.
- Toe: 1 piece per slipper If you used two different colors for the sole, consider matching the toe piece to one of them.
If you used two different colors, put the contrasting color on top, so that it will stand out against the toe piece. ^{[1]
X
Research source}
Start by pinning the top-center of all three pieces together. Next, pin the bottom corners of your toe piece down to the inner and outer arch of your sole pieces.
9
Stitch around the slipper using a ¼-inch (0.64-centimeter) seam allowance. You can do this by hand or on the sewing machine. If you are doing it by hand, consider using a heavy-duty thread, or even embroidery thread. You can use a thread color that matches the felt, or even a contrasting color.
- If you are using a sewing machine, you can use a basic stitch for something plain and simple, and a zigzag stitch for something fancier.
- If you are doing this by hand, you can use a straight stitch for something easy, and a blanket stitch for a nice, rustic touch.
10
Dress it up, if desired. Your slipper is officially complete. Now, all you have to do is repeat this method for the other one. You can leave your slippers as they are, or embellish them further with small decorations, such as:
- Add some simple embroidery to the toe piece using embroidery thread in a contrasting color.
- Stitch some designs onto the toe piece using seed beads.
- Add a blanket stitch to the raw edge of your toe piece. This will look great if you used a blanket stitch on the rest of your slipper.
- Stitch or glue on felt shapes or appliqués.

Method 3

Method 3 of 3:

Making a Wrapped Baby Slipper

Download Article

You only need to trace one foot, because you can simply flip the pattern over for the other slipper. If your baby moves around too much, you can use a slipper or shoe that fits him or her well instead.
2
Neaten your pattern up, and add a ¼-inch (0. -64-centimeter) seam allowance. Go around your pattern again, but this time, add a ¼-inch (0.64-centimeter) border. Make sure that the curves are nice and neat, and not "sketchy." You can do this with a pen to distinguish it from the original pattern.
- It might still be a good idea to do this if you used a slipper to trace the pattern. Remember, it is always easier to cut down something that's too big than the other way around.
Start at the pinkie area, and wrap over the toes, around the heel, and back towards the pinkie. Next, overlap towards the big toe, and record your number. This extra measurement is important; it will help create that wrapped, crisscross look for your slipper.
This will give you the height of your slipper. Again, if your baby moves around too much, use shoe that fits him or her well. Choose a shoe that ends either at the ankle or just below it; do not use a bootie.
Start by drawing a long, skinny rectangle based on your circumference and heel-to-ankle measurements. Next, orient the rectangle landscape-fashion, and use the toe part of your sole to sketch out the curves. Make sure that the pinkie part of the sole touches the top, long edge of the rectangle on each side.
You will need to cut out each pattern once. Flip one set over for the other slipper, and set it aside for now.
Find the center of the rectangle, and pin one of the long edges to the center of the sole's heel. Your rectangle may have an edge that's move curved than the other one. Keep this edge against the edge of the sole.
8
Wrap each side of the rectangle around the sole. Start by wrapping one of the flaps around the inside of the heel, over the big toe area, and towards the pinkie, pinning it as you go. Next, wrap the other flap around the other side of your slipper, pinning as you go.
- Remember to reverse the flaps for your other slipper. This way, they both wrap towards each other.
You can do this using a simple straight stitch, or you can use a blanket stitch for something fancier. Remember to pull the pins out as your sewing.
Place the elastic behind the crossed-over flaps. Pin the left side of the elastic to the left flap, and the right side to the right flap. Avoid stretching the elastic if you can. Next, stitch the elastic in place using a some X-shaped stitch. This will allow the slipper to pull open and close. ^{[2]
X
Research source}

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

You can decorate the top with sequins, beads, felt scraps, or anything else that you can think of!

Thanks
Helpful 0 Not Helpful 1
These slippers make great Christmas presents, just use one of the recipient's shoes instead of your foot!

Thanks
Helpful 0 Not Helpful 0
Make your slippers non-skid by drawing several squiggles of hot glue on the bottom of the sole.

Thanks
Helpful 0 Not Helpful 0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

If you have wool allergies, make sure that the felt is not made out of 100% wool.

Thanks
Helpful 0 Not Helpful 0

Things You'll Need

Making a Basic Slipper

Pen
Felt
Scissors
Stuffing or batting
Sewing machine
Straight pins

Making a Rustic Slipper

Paper
Pencil
Pen
Scissors
Felt
Straight pins
Embroidery needle and embroidery thread or sewing machine and thread

Making a Wrapped Baby Slipper

Paper
Pencil
Scissors
Felt
Straight pins
Embroidery needle
Embroidery thread
Elastic

You Might Also Like

[1]

[2]

Log in

How to Make Felt Slippers

Steps

Making a Basic Slipper

Making a Rustic Slipper

Making a Wrapped Baby Slipper

Expert Q&A

Tips

Warnings

Things You'll Need

Making a Basic Slipper

Making a Rustic Slipper

Making a Wrapped Baby Slipper

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories