Thermite Formula: Ingredients, Tips, and Everything You Need to Know

Download Article

A step-by-step guide to making thermite at home, complete with safety information

Co-authored by Bess Ruff, MA and Johnathan Fuentes

Last Updated: December 25, 2024 Approved

Download Article

ARTICLE

VIDEO

Of all the do-it-yourself chemistry experiments found online, there’s almost nothing cooler—or maybe hotter—than a thermite reaction. With a fire that reaches 2,200 °C (3,990 °F), this simple mixture of rust and aluminum powder burns hot enough to turn rocks into lava. Thermite is famously used for welding since it produces molten iron as a byproduct, though it has tons of other applications too. Though you can make thermite yourself with the right preparation and safety gear, remember that it is extremely dangerous and should only be done in a lab.

Things You Should Know

Thermite is a 1:3 mixture (by mass) of metallic aluminum and iron oxide. It burns at 2,200°C (3,990 °F), producing molten iron, and is often used for welding. ^{[1]
X
Research source}
Making thermite is extremely dangerous. Take safety precautions like wearing a welding mask, fireproof apron, and protective clothing.
To make thermite, combine powdered iron oxide and aluminum powder in a ceramic container. Insert a magnesium strip into the mixture, light it, and stand back.
Do not attempt to extinguish burning thermite with water. Let it burn out. Never remove your safety gear when working with thermite. ^{[2]
X
Research source}

Part 1

Part 1 of 2:

Safety Precautions

Download Article

1
Select an area that’s free of flammable material. Ideally, make thermite in a laboratory equipped with heat screens and ventilation. Making thermite outside is not recommended because wind can carry burning material away from the reaction. Whatever site you choose, make sure there is nothing that can burn within a 4 meter (13.1 ft) radius of the reaction. Make sure that there no metals with low melting points, such as lead, tin, cadmium, or zinc, within a 4 meter (13.1 ft) radius either. ^{[3]
X
Research source}
- Do not make thermite inside your home or garage.
- Keep children and pets away from the thermite. Never let children do this experiment.
2
Use ceramic containers rather than metals to minimize fire risk. Since you'll be burning metals, the thermite fire can burn through a lot of substances, including thick metals. Ceramics, such as clay flower pots , can hold the fire without melting. ^{[4]
X
Research source}
- Look online for ceramics labeled as having a high heat point. Remember, thermite burns at 2,200 °C (3,990 °F).
- Even ceramics can break from excess heat. Stand back once the reaction starts in case the container breaks, spreading burning material.
Advertisement
3
Wear a welding mask to protect your face and eyes. In addition to being extremely hot, thermite emits UV radiation that can damage your vision. A welding mask provides the best protection because it's designed for use with burning metals, such as thermite. ^{[5]
X
Trustworthy Source
US Occupational Safety and Health Administration
U.S. government agency responsible for setting and enforcing workplace safety standards
Go to source}
- Do not look into the flame directly. Use a welder's mask or welder’s glasses . Looking at the flame directly could cause permanent eye damage.
- If you don't have a welding mask, wear a pair of dark sunglasses with full UV protection. However, the thermite can still damage your eyes if you look at it directly.
4
Put on safety gear, including gloves and a fireproof apron . Choose a pair of sturdy, heatproof gloves , and make sure the fireproof apron covers your whole body. Wear thick sleeves, pants that cover your exposed skin, and close-toed shoes. ^{[6]
X
Research source}
- Thermite is very dangerous, so protective gear is essential.
- Take precautions to prevent your clothing from catching fire. Burning clothing is difficult to remove and can cause severe burns.

Part 2

Part 2 of 2:

Making the Thermite

Download Article

1
Use powdered iron oxide , aluminum powder , and a strip of magnesium . Choose finely powdered iron oxide so that it reacts easily with the aluminum, forming thermite. Make sure the magnesium strip is very thin so that it burns easily and ignites the material. For a basic thermite experiment, you'll need 3 grams of aluminum powder and 9 grams of iron oxide. ^{[7]
X
Research source}
- Do not try to grind up the metals into powder yourself, as this is dangerous. Buy them in jars from a chemical company or online. Aluminum powder can also be obtained from a paint store or even an Etch-a-Sketch.
2
Dry out your iron oxide in an oven or over a Bunsen burner . Set the oven on a medium temperature, such as around 200 °F (93 °C). Heat the iron oxide for 1 hour. If you're using a Bunsen burner, place the iron on an evaporating dish over the flame for 1 hour. ^{[8]
X
Research source}
- Allow the iron oxide to completely cool before you do the experiment.
- Use caution when using a bunsen burner. The open flame is a fire risk. Never leave it unattended. When you’re finished, make sure the gas supply is shut off completely.
3
Mix the aluminum powder and iron oxide on a sheet of paper. Add 3 grams of aluminum powder and 9 grams of iron oxide. Swirl the metals together or shake them between 1 piece of paper and another. Continue to blend until they are fully mixed.
- If you increase the quantity of the metals, stick to a 1:3 ratio (by mass) of aluminum to iron oxide. But don’t work with larger amounts until you’re experienced in working with thermite, since this experiment is very dangerous.
- Never mix them in a metal container, as this can contaminate the project or cause an unwanted reaction. ^{[9]
  X
  Research source}
4
Pour the mixture into a ceramic container, such as a clay flower pot . Ceramics are less likely to melt with the heat of the thermite. It's best to place the ceramic container into a second ceramic container, in case the first one shatters from the heat. ^{[10]
X
Research source}
- Do not light thermite on an ice block, as it may cause a dangerous explosion. Ice is not an option for controlling the heat of the flame.
5
Insert the magnesium strip into the mixture. Make sure that your magnesium strip is at least 6.5 cm (2 inches) long. ^{[11]
X
Research source}
- Use a longer magnesium strip to give yourself time to step back before the thermite ignites.
6
Light the magnesium strip with a propane torch or stick lighter . Stand at least 4 meters (13 feet) away from the thermite to watch the reaction. ^{[12]
X
Research source}
- Use sparklers to light the thermite if you don’t have magnesium available.
- Keep your safety gear, especially your eye protection, on at all times.
- Do not use matches to light the magnesium strip (or sparkler) since matches could drop burning material into the thermite, causing it to ignite while you are standing next to it.
7
Let the thermite burn out completely. Remember: a thermite reaction is irreversible once it starts. Don’t try to extinguish it using water. This could cause an explosion. ^{[13]
X
Research source}
- Keep a fire extinguisher nearby in case of secondary fires. ^{[14]
  X
  Research source} You cannot use a fire extinguisher to put out the reaction itself, but you can use it to prevent fire from spreading to other areas once the reaction has stopped.

Community Q&A

Search

Add New Question

Question

What can you use Thermite for?

ChemGenius

Community Answer

Making iron nodes. It used to be used to weld train tracks together. The military uses it to quickly destroy valuable information or equipment in a hurry during war.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 29 Helpful 164
Question

Is it possible to use aluminum oxide instead powdered aluminum?

Community Answer

No. Thermite is an oxidation of the aluminum powder to aluminum oxide and a concurrent reduction of the iron oxide powder to iron. The aluminum and iron oxidation and reduction, respectively, form the two half cells of the thermite redox reaction. If you start with aluminum oxide and iron, you have the stable products after a thermite reaction, not the unstable reagents needed to make a thermite reaction.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 64 Helpful 216
Question

Can the thermite reaction cause an explosion or just cause spontaneous combustion?

ChemGenius

Community Answer

For iron thermite, it burns violently. If you replace the iron oxide with copper oxide it explodes. A thermite mixture made from iron oxide & alumimium powder mixed together can explode for no reason.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 81 Helpful 308

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Allow the thermite to burn out completely. A thermite reaction is irreversible once it starts.

Thanks
Helpful 18 Not Helpful 2
Keep a fire extinguisher nearby for secondary fires only. You cannot put out a thermite fire using a fire extinguisher.

Thanks
Helpful 16 Not Helpful 3
Use a propane torch or stick lighter to ignite the magnesium strip. Don’t use a match or anything that could break and fall into the thermite. This could cause it to ignite while you are standing next to it.

Thanks
Helpful 15 Not Helpful 3
Stand at least 4 meters (12 feet) back from the thermite after you ignite the magnesium strip.

Thanks
Helpful 16 Not Helpful 5
Do not add anything to the thermite once it ignites.

Thanks
Helpful 11 Not Helpful 3
Making thermite is extremely dangerous. A thermite reaction can cause severe burns and nearby areas to catch fire.

Thanks
Helpful 12 Not Helpful 7
Put a ceramic dish under the thermite to catch the resulting molten iron.

Thanks
Helpful 9 Not Helpful 7
Keep children and pets away from your thermite.

Thanks
Helpful 10 Not Helpful 9
Do not let children participate in this experiment in any way.

Thanks
Helpful 11 Not Helpful 32
Don’t ignite thermite on public property, streets, sidewalks, or other thoroughfares.

Thanks
Helpful 9 Not Helpful 25
Check the laws of your country, region, and city to ensure that making thermite is not explicitly illegal, or that doing so does not violate other laws. For example, in the U.K., there are strict laws regulating the creation of incendiary devices. ^{[15]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
Call emergency services immediately if the thermite causes a secondary fire, or if you or someone in the vicinity is injured.

Thanks
Helpful 0 Not Helpful 0
Don't put thermite on ice. This could cause an explosion. ^{[16]
X
Research source}

Thanks
Helpful 0 Not Helpful 0

Things You'll Need

Powdered aluminum
Powdered iron oxide
Magnesium strip or sparkler
2 clay pots
Sand
Welder's mask or sunglasses
Fireproof apron
Sturdy, heatproof gloves
Propane torch or stick lighter
Thick clothing
Close-toed shoes
Oven or Bunsen burner
Evaporating dish (optional)
Heatproof mat (optional)

You Might Also Like

[1]

[2]

[3]

[4]

[5]

Trustworthy Source

Go to source

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

Log in

Thermite Formula: Ingredients, Tips, and Everything You Need to Know

Things You Should Know

Steps

Safety Precautions

Making the Thermite

Community Q&A

Video

Tips

Warnings

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories