Download Article
Keep vinyl floors sparkling clean with these maintenance tips
Download Article
Are your vinyl floors starting to look a little hazy or dirty even after you clean them? Luxury vinyl planks, or LVP, are an excellent option for durable flooring, but they regularly need a quick polish to maintain their shine. Luckily, vinyl is so easy to take care of with a few cleaners you probably have at home already. Read on, and we’ll walk you through how to restore the look of your floors and keep them shiny for years to come.
Things You Should Know
- Sweep or vacuum your vinyl plank floors to clean dirt and debris before polishing them. Work wax remover into the floor if there’s an old finish on the planks.
- Polish your floors with an pH neutral vinyl cleaner and mop going in the direction of the grain. Alternatively, use diluted vinegar or rubbing alcohol to make your floors shine.
- Wipe your floor with a damp cloth or mop after using a cleaner to remove residue.
Steps
-
Vacuum or sweep your flooring. Use a soft-bristle broom or dust mop to sweep all the dirt and dust off of your floor. If you’d rather vacuum, just turn off the beater brush so you don’t scratch your luxury vinyl planks while you’re cleaning your floors .- Sweeping or vacuuming removes small pieces of dirt, sand, and rocks that could leave scratches on the floor and ruin the finish.
- If you can’t turn off the beater brush on your vacuum, then use a brush or hose attachment to clean your floors instead.
-
Use wax remover to strip floors if they have an old cloudy finish. While it’s not normal for luxury vinyl planks to have a finish, your floors may have them if you’ve used wax or “quick shine” products in the past. Wet a sponge mop with a wax remover that’s specifically made for vinyl flooring. Work the wax remover over a small part of your floor, and let it sit to strip the wax . Then, gently scrub the spot with a brush or electric scrubber to clean off the finish. Rinse your floor with a damp mop and let it dry completely. [1] X Research source- For a homemade wax remover, mix 1 ⁄ 2 –1 cup (120–240 ml) of ammonia in 1 gallon (3.8 L) of warm water.
- Test the wax remover in an inconspicuous spot first to make sure it works on your floors.
- Follow the directions on the wax remover’s label since they may vary slightly.
Advertisement -
Mop a pH-neutral cleaner onto your floors to restore their shine. Follow the instructions on the cleaner’s package to find the proper amount to mix with warm water. Wet a sponge mop with the cleaner and wring out the excess. Follow the grain direction on the luxury vinyl planks as you mop to get dirt and dust deep in the crevices that make your floors look dull. Follow up with a mop damp with clean water to rinse the cleaner off.- Avoid putting undiluted acidic or abrasive cleaners on your floors since they could damage your floors or leave a haze on the surface.
- Make sure that the mop isn’t dripping wet and that liquid doesn’t puddle up on the floor since it could cause damage to your floors.
-
Scrub your floors with an apple cider vinegar solution for a natural polish. Mix 1 ⁄ 4 cup (59 ml) of apple cider vinegar with about 1 US quart (0.95 L) of warm water. Wet a mop in the solution and lightly scrub your floors in the same direction that the planks run. Rinse your mop out with hot water as you spread the cleaning solution across the floor. [2] X Research source- Apple cider vinegar strips the dirt and debris stuck in the wear layer of your vinyl planks so their original shine shows through again.
- Use distilled white vinegar instead if you want to disinfect your floors at the same time.
- Add a few drops of baby oil or Jojoba oil to the vinegar solution to spread a thin, shiny coating over your floors.
-
Use a baking soda paste to scrub away stains and dull spots. Mix equal parts water and baking soda so it forms a thick paste. Dab the paste with a damp microfiber cloth onto any stains or marks scuffing up your vinyl floors. Gently scrub the paste around the edges of the stain and work toward the center to remove it and make the vinyl planks shine again. Then, use a clean damp cloth or mop to wipe up the baking soda. [3] X Research source- Baking soda works great for getting rid of cloudy marks or stains left over from food or drinks.
- If you still notice the stain, try applying the baking soda paste and scrubbing it again.
-
Buff scuff marks out with a damp melamine sponge . If you notice black scuffs marking up your floor in high-traffic areas, wet a melamine sponge and wring out all the water. Gently scrub at the scuff mark to lift it off your floors and make them glossy again. [4] X Research source- Avoid scrubbing with an abrasive sponge or bristle brush since it weakens the wear layer of the vinyl that protects your flooring.
-
Try diluted rubbing alcohol to get rid of the toughest marks on your floor. Mix equal parts of rubbing alcohol and warm water in a container. Either use a sponge mop or a microfiber cloth to spread the alcohol solution over the mark on your floor. Then, wipe the area clean with a damp cloth. [5] X Research source- If the mark still doesn’t come up, wet the corner of a clean cloth with undiluted rubbing alcohol and gently wipe the stain. Rinse the alcohol off when you’re finished with a damp cloth.
- Rubbing alcohol works best for oily stains from nail polish, ink, or cosmetics. [6] X Research source
Advertisement
-
Sweep or vacuum dirt regularly. Whenever you notice dirt, dust, or debris, clean your floors with a broom, dust mop, or vacuum. Check your floors daily to see if they’re dirty and need cleaning; otherwise, make it a habit to clean your floors at least once a week.- Avoid using the beater brush on your vacuum since you could scratch the finish off your vinyl planks.
-
Place doormats at the entrances. Put a doormat on the inside and outside of each doorway. Wipe off your shoes every time before walking on your floors so you’re less likely to track dirt or debris inside that could make your floors dull or scratch the surface. [7] X Research source- Avoid using mats that have rubber backing since they could potentially stain your vinyl floors.
-
Close your blinds to protect your floor from sunlight. UV rays from the sun can cause discoloration and damage to your floors after prolonged exposure, so shut your blinds or shades during the brightest times of the day. -
Use floor protectors under furniture. Put a protective floor mat down under rolling chairs or furniture that you move often so you don’t leave marks on your floor. Alternatively, attach felt furniture pads to the bottom of heavy furniture so it doesn’t scrape against the vinyl planks any time you move them.- Replace the felt pads when they look dirty or are covered in debris since they could start scratching your floor.
-
Avoid waxing your floors. Luxury vinyl plank floors already have a protective coating built into them, so they don’t require an additional finish. Layers of wax can also start looking cloudy or hazy over time, so it’s best to just clean your vinyl floors regularly to keep them shiny and sparkling. [8] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Wipe the floor with a clean cloth after using any cleaner to remove streak marks. [9] X Research sourceThanks
- Clean up spills as soon as they happen to help prevent any stains or damage to your vinyl plank floors. [10] X Research sourceThanks
- If you have pets, trim their nails since they could scratch or leave marks on your floor. [11] X Research sourceThanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Avoid using steam cleaners on luxury vinyl planks since the heat and moisture could damage them. [12] X Research sourceThanks
Advertisement
Things You’ll Need
- Vacuum or broom
- Wax remover or ammonia
- Stiff-bristled brush or electric scrubber
- Melamine sponge
- pH neutral vinyl cleaner
- Mop
- Apple cider vinegar or distilled white vinegar
- Baking soda
- Rubbing alcohol
Expert Interview
Thanks for reading our article! If you’d like to learn more about cleaning hacks, check out our in-depth interview with Kadi Dulude .
References
- ↑ https://www.castlebri.com/wp-content/uploads/MaintainingVinylFloorCovering.pdf
- ↑ https://rightfloors.com.au/pub/media/catalog/pdf/Vinyl%20Planks/Bautex/Boyar/Boyar%20Recommended%20Cleaning.pdf
- ↑ https://rightfloors.com.au/pub/media/catalog/pdf/Vinyl%20Planks/Bautex/Boyar/Boyar%20Recommended%20Cleaning.pdf
- ↑ https://youtu.be/4N8hpRupagQ?t=59
- ↑ https://www.nationaltiles.com.au/media/amasty/pdf/Vinyl%20Flooring%20Care.pdf
- ↑ https://www.cflflooring.com/wp-content/uploads/2022/02/Maintenance-guide.pdf
- ↑ https://www.flooringinc.com/Assets/pdf/maintenance/ShawResilientMaintenance.pdf
- ↑ https://youtu.be/fZq4kwlZyFc?t=109
- ↑ https://images.thdstatic.com/catalog/pdfImages/bd/bd051942-1cc5-42b5-b202-d08f9e699187.pdf
About This Article
Thanks to all authors for creating a page that has been read 40,443 times.
Reader Success Stories
- "Though it seems quite contradictory throughout, I was able to glean information that helped me understand how to use baking soda, vinegar, ammonia, and rubbing alcohol to keep my LVP floor clean and maybe even shiny." ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Though it seems quite contradictory throughout, I was able to glean information that helped me understand how to use baking soda, vinegar, ammonia, and rubbing alcohol to keep my LVP floor clean and maybe even shiny."
..."
more
