How to Make Water Candles

Co-authored by Filip Kabashi

Last Updated: May 19, 2024 References

Water candles look impressive and are surprisingly easy to make. The combination of water with a few decorations creates a pretty, shimmering light. The trick behind these candles is creating a floating wick out of thin plastic, and adding one secret ingredient to the water.

Part 1

Part 1 of 4:

Decorating the Jar

Download Article

It can be as simple as a mason jar or a tall, cylindrical candle holder (hurricane). For something more unique, you could try a small fishbowl or even a wine glass! For better results, use a tall, narrow vase. This will allow you to fill it with more decorations and have a thicker oil layer, which will increase the burning time. ^{[1]
X
Research source}
They are often labeled as "vase filler" and come in round or half-dome shapes. You can find these in the floral section of an arts and crafts store. How much vase filler you add is up to you, but don't fill the bottom of your jar more than a third of the way. If you overfill the jar, you won't have room to add the water and the oil.

Advertisement
3
Create an elegant jar by filling it with flowers. Cut the blooms off of real flowers, or pull them off of fake ones. Fill your jar about two-thirds of the way with these flowers, or until you have about 2 inches (5.1 cm) of space at the top. For a more elegant candle, fill the jar a quarter of the way with clear, glass marbles first, then add the flowers. ^{[2]
X
Research source}
- Fresh flowers should last up to 1 week in the jar.
4
Use thinly-sliced citrus fruit for a colorful jar. Cut an orange, lemon, and grapefruit into thin slices, then fill the jar two-thirds of the way with them. Make sure that the flat parts of the slices are pressed up against the walls of the jar so that they are visible. ^{[3]
X
Research source}
- You don't have to use all 3 types of citrus fruit. You can use just 1 or 2 types of citrus fruit.
- For more color and fragrance, add some herbs, such as rosemary sprigs, star anise, cloves, or cinnamon sticks.
- Fresh herbs and fruit slices will last up to 1 week in the water. ^{[4]
  X
  Research source}
Food coloring is potent, so you'll have to be extra careful in your measurements. Fill a large jar with water, then stir in 1 drop of food coloring. Adjust the amount of water and food coloring until you get the shade you want. Save the colored water for later.
6
Create an underwater scene with sand, plastic fish, and shells. Fill the bottom quarter of your jar with light-colored sand. Add 1 to 2 plastic fish. Make the scene more aquarium-like with a pretty shell and an aquarium plant. When the time comes to fill your jar with water, use blue-tinted water. ^{[5]
X
Research source}
- For an elegant scene, use sand, 1 to 2 shells, and a small aquarium plant or sprig of rosemary.
Make sure that the items are water-safe and heavy enough so that they don't float. If you are using a combination of different items, make sure that they look nice together. If you are going to be using the jars for an event, make sure that they match the decorations that you will be using. Don't fill the jar more than two-thirds of the way.

Part 2

Part 2 of 4:

Creating the Wick

Download Article

1
Crumble the wax off of a birthday candle. You can use a brand-new birthday candle or a spent one. If you decide to use a brand-new birthday candle, cut the wick in half after you crumble the wax off to make it shorter. The length of the wick won't affect how long the candle will burn; the amount of oil you use will. If the wick is too long, it will just burn and fall into the water.
- For some reason, waxed wicks and cotton wicks don’t seem to work very well for this type of candle. Stick with birthday candle wicks. ^{[6]
  X
  Research source}
- If you are able to find floating wicks online or in a store, you can use those instead and skip this section. They are floating metal disks with wicks inside of them.
2
Soak the wick in oil for 2 minutes. Fill a small dish with cooking oil or lamp oil, then place the wick into the oil. Leave the wick there for 2 minutes before pulling it out and wiping the excess oil off with a paper towel. This will saturate the wick and help it burn more effectively. ^{[7]
X
Research source}
- Great types of cooking oil to use include: canola, olive, and sunflower.
- You should use the same type of oil later on when you go to assemble your candle.
3
Cut a circle out of clear plastic that fits inside your jar. You can get this plastic from anywhere, such as a plastic bottle, cup, packaging, etc. The plastic needs to be thin and clear, otherwise it will become visible once you add it to the oil. The circle doesn’t need to be perfect, but it needs to be small enough to fit inside your jar. ^{[8]
X
Research source}
- If you are using a plastic bottle, cut the circle from the domed part. This will create a shallow cup and help it float better.
4
Poke a hole in the middle of the circle, then cut a slit. Place the circle on top of a piece of craft foam, cardboard, or a piece of wood. Use a skewer, awl, or pair of manicure scissors to poke a hole in the middle of the circle. Next, use a craft blade or manicure scissors to make a small slit coming off of the hole. ^{[9]
X
Research source} You can also make a small X over the hole instead. ^{[10]
X
Research source}
- The hole must be centered, otherwise the wick may not stand upright. ^{[11]
  X
  Research source}
5
Insert the wick into the hole, then slide it into the slit. The bottom ¹ ⁄ ₄ inch (0.64 cm) of the wick should be sticking out of the bottom of the plastic circle. ^{[12]
X
Research source} If you cut an X into the plastic, it may already be stable enough. If it isn't, slide the wick into one of the slits making up the X.
- If you cut the circle from a plastic bottle, the shorter end should be sticking out of the domed part of the circle; the longer end should be sticking out of the cupped part.

Part 3

Part 3 of 4:

Assembling the Candle

Download Article

This will give you enough room for the oil. If you add too much water, the oil layer will be too thin, which will decrease the candle's burning time as well as increase the chances of spills. You will also run the risk of the wick touching the water and extinguishing. ^{[13]
X
Research source}
2
Pour in the oil until it's ¹ ⁄ ₃ to ¹ ⁄ ₂ inch (0.85 to 1.27 cm) deep. Canola oil, olive oil, and sunflower oil are all great choices. You can even use lamp oil from the craft store. How much oil you use will depend on the size of your jar. The wider your jar is, the more oil you will need to use. Don’t worry if the oil mixes into the water at first; it will float to the top. ^{[14]
X
Research source}
- Most jars will require 2 to 3 tablespoons (30 to 45 milliliters) of oil. ^{[15]
  X
  Research source} About 1 tablespoon (15 milliliters) of oil will burn for up to 2 hours. ^{[16]
  X
  Research source}
- Lamp oil is more expensive, but it comes in many different colors, which can be helpful, especially if you tinted the water.
Make sure that the longer part of the wick is sticking out of the oil, and the shorter part is in the oil. If the bottom of the wick is touching the water, add a little bit more oil. This way, you won’t risk the wick accidentally soaking up water and extinguishing the flame.

Part 4

Part 4 of 4:

Using the Candle

Download Article

1
Set the candle down onto a heat-safe surface. A metal tray, candle charger, or anything with a rim would be ideal. This way, if the candle accidentally gets knocked over, the burning oil will be contained. If you don't have any of these on hand, set the candle down someplace where it won't get bumped.
- Make sure that there are no open windows or vents near the candle.
2
Light the wick. You can do this with a lighter, match, or stick lighter. Make sure that you only light the wick, otherwise the oil layer may also ignite. How long the candle lasts depends on how much oil you use. Typically, these types of candles can burn for up to 3 hours. ^{[17]
X
Research source}
- Reduce smoke by trimming the wick to ¹ ⁄ ₈ to ¹ ⁄ ₄ inch (0.32 to 0.64 cm)
Avoid moving the candle around once you light it, or you risk spilling the hot oil. Never leave a burning candle unattended. All it takes is a few seconds to blow it out.
You should blow the candle out whenever you leave the room. If the oil level starts to get too thin and the wick is touching the water, extinguish the candle, add more oil, then relight it.
The water will evaporate over time, even if you are not using the candle. Each time you use the candle, check the water and oil levels first. Make sure that the oil layer is at least 1 inch (2.5 cm) away from the decorations. If the oil is too close to them, add more water. If the oil level is too thin, then add more oil.

Community Q&A

Search

Add New Question

Question

What if I want to scent it?

Community Answer

Buy candle scents from your local craft store or purchase essential oils and add a few drops to your candle.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 22
Question

How does a water candle burn?

Community Answer

The oil 'feeds' the wick as it's a flammable liquid; that's also why you should be careful with these!

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 17
Question

For how long will this candle burn?

Community Answer

How long the candle burns depends on how much oil you used and how thick the oil layer is. In general, 1 tablespoon (15 milliliters) of oil will burn for about 2 hours.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 5 Helpful 19

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Add some herbs or essential oils to your water to make it smell nice. ^{[18]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
Decorate the outside of the jar instead of the inside. Draw designs on it with puffy paint or dimensional fabric paint.

Thanks
Helpful 4 Not Helpful 3
The water will eventually start to look murky. How long this takes depends on how much sunlight it receives. When this happens, discard the water and clean the jar.

Thanks
Helpful 3 Not Helpful 4

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Do not touch the hot oil, and avoid moving the jar while it's lit.

Thanks
Helpful 6 Not Helpful 0
Never leave a burning candle unattended.

Thanks
Helpful 3 Not Helpful 2

Things You'll Need

Glass jar or candle holder
Decorations
Thin, clear plastic
Birthday candle
Skewer, awl, or manicure scissors
Craft blade or manicure scissors
Water
Cooking oil or lamp oil

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

Log in

How to Make Water Candles

Steps

Decorating the Jar

Creating the Wick

Assembling the Candle

Using the Candle

Community Q&A

Video

Tips

Warnings

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories