How to Make Your Own Sewing Patterns

Co-authored by Korri Burton-Universe and Jessica Gibson

Last Updated: December 14, 2024 Fact Checked

Creating your own sewing pattern is a great way to save money and time spent in the dressing room. You can draft your own custom bodice piece using your specific measurements. This will allow you to sew tops or dresses and be assured that they will fit well. For an even easier way to make your own patterns, choose an item that already fits you well and trace it to make a pattern.

Method 1

Method 1 of 2:

Drafting a Pattern Using Your Measurements

Download Article

1
Take your measurements . You have to take accurate measurements if you’re going to sew something. In order to create accurate patterns that fit you well, you'll need to use a soft measuring tape and write down the following measurements:
- Bust for women's clothing: Wrap the tape around the widest part of your bust.
- Waist : Measure around the narrowest part of your natural waist.
- Height for dresses: Stand straight against a wall and have someone measure from the top of your head to the base of your feet.
- Neck for men's shirts: Wrap the tape around the neck where the collar of the shirt will sit.
- Hips : Wrap the tape around the widest part of your hips.
- Back length and width: Measure from the neck to the waist to find the length and measure across the widest part of your back to find the width.
- Chest for men or women's clothing: Measure across the widest part of your chest above your bust.
- Sleeve length : Hold the tape from the shoulder down the arm as long as you want the sleeve to be.
- Shoulder length: Measure from the neck to the edge of the shoulder.
- Upper arm width: Wrap your measuring tape around the thickest part of your arm near the armpit.
2
Sketch a design of the garment you want to make. Decide if you're making a skirt, pants, or top and whether or not it will have sleeves. Then, draw a rough design of how the garment should look. This will help you determine how to divide the garment into pieces so you know how many separate pattern pieces you'll need to make. ^{[1]
X
Research source}
- For example, if you're making a simple slip dress, you might need 1 front piece, 1 back piece, and a sleeve strap pattern.
Advertisement
3
Lay a sheet of paper flat and plot the length of your pattern. Place a large piece of pattern or brown postal paper on a flat work surface and ensure that 1 side of the paper is perfectly straight. Then, place a ruler 2 inches (5.1 cm) from the top of the paper and measure from that point down as long as you want the garment to be.
- For example, if you're 6 ft (1.8 m) tall, make the dress 37 inches (94 cm) long for a mini-dress, 40 inches (101.6 cm) for a knee-length dress, or 61 inches (154.9 cm) for a floor-length dress.
- The straight edge of the paper will become the center front (CF) of the pattern. Make your length mark along this edge.
Tip: To determine how long to make a dress, look at your height measurement and decide how much of your body you want the dress to cover. If you're making a shirt or top, refer to your back length measurement and where you want the shirt to fall in relation to your waist.
4
Draw horizontal lines to mark the shoulder, bust, waist, and hip line. Place a straight ruler so it's at a 90-degree angle at the top of the line you just drew for the center front. Draw this top horizontal line, which will be your shoulder line. Then, bring the ruler down to make the horizontal bust line. Move the ruler down again to draw the horizontal waistline. The bottom of your shirt will be the hip line.
- Refer to the measurements you took to determine where to place the ruler for the shoulder line, bust line, waistline, and hip line.
5
Draw a line connecting the bust or chest, waist, and hip measurements. Look at your measurements and make a dot on the bust line that's 1/4 as long as the distance of your measurement. Do this for the waist and hips too. Then, use a pencil and curved ruler to sketch a line that connects the dots on the bust or chest line, the waistline, and the hip line.
- For example, if your bust measurement was 40 inches (100 cm), divide it by 4 to get 10 inches (25 cm). Make a mark that's 10 inches (25 cm) from the edge on the bust line.
- This will make 1 edge of your center pattern piece.
6
Draw the neckline and shoulder. Use a curved ruler to draw your neckline from the top of the shoulder line to the center front line. You can make the neckline as low or high as you like, keeping in mind that the back neckline is usually higher than the front neckline. Then, leave space for the armhole and draw a curved line from the shoulder down above the bust line. ^{[2]
X
Research source}
- To make the shoulder sit naturally, give the shoulder a slightly downward slope.
7
Add a seam allowance around the curved edges of your piece. Use a ruler or seam allowance ruler to draw a line that's parallel to your pattern outline. Add ¹ ⁄ ₂ inch (1.3 cm) allowance.
- You can add a ¹ ⁄ ₂ inch (1.3 cm) larger allowance along the bottom line. This can make it easier to hem your garment.
- For example, if your pattern piece is 61 inches (154.9 cm) long, make the seam allowance line 61 ¹ ⁄ ₂ inches (156.2 cm) long.
8
Create a sleeve pattern if you want a dress or shirt to have sleeves. Refer to the measurements you took for sleeve length and upper arm width and decide what style of sleeves you want for the garment. Draw your sleeve pattern on the fold. ^{[3]
X
Research source}
- For example, the length of the sleeve might be 5 inches (13 cm) long and you'll use the arm width measurement of 12 inches (30 cm) to determine how wide to make the sleeve.
9
Cut out and label the pattern pieces. Lay another sheet of pattern paper under your traced pattern. Pin the papers together and use scissors to cut through both layers along the seam allowance line. The bottom layer will become the back pattern piece. Take care not to cut the curved neckline so you can adjust the front and back pieces as you like.
- For example, you might want to cut the front neckline low while leaving the back piece's neckline high.
- Label each pattern piece you make so it's easy to keep track of them.
Tip: The number of pattern pieces you need to make will depend on the garment you're making. For example, if you're making a plain T-shirt, you might only need 4 pattern pieces, 1 for the front, 1 for the back, 1 for the sleeves, and 1 for the collar. A full skirt that flares out may need 6 identical pieces that are attached with a waistline piece.

Method 2

Method 2 of 2:

Making Templates from Clothing

Download Article

1
Cut out a piece of pattern paper and fold it in 1/2 vertically. Cut a piece of paper that's larger than your garment and fold it. Then, lay the paper on a flat work surface instead of on carpet or a rug. If you don't have pattern paper, you could use brown postal wrapping paper. ^{[4]
X
Research source}
- You could work on a stiff corkboard if you'd like to be able to pin the garment onto the paper as you work.
2
Fold your garment in 1/2 vertically and pin along the seams. Since most pieces of clothing are cut on the fold, you'll need to fold your item in 1/2 lengthwise so the seam is visible in the center. Once you've lined up the garment so the edges and seams match, insert pins along the seams for the panel you folded. ^{[5]
X
Research source}
- You'll be tracing each individual piece so only pin the panel that's folded in 1/2 right now.
Tip: Ensure that the item you're copying fits you well. This will make it easier to create a pattern that fits you without having to adjust it very much.
3
Lay the item on the paper and pin it in place. Line up the folded edge of your garment with the folded edge of the paper. Insert sewing pins about every 3 to 4 inches (7.6 to 10.2 cm) along the edge so the garment doesn't slide off of the paper as you're tracing it. ^{[6]
X
Research source}
- If your garment has sleeves, fold them over the main panel of the item so they don't stick out.
- This technique can be used on any garment, but it does work best on simple garments stitched together from basic shapes, such as a tunic, instead of a lined dress with darts, for instance.
4
Trace around the folded piece of the garment. Use a pencil, chalk, or tracing wheel to trace around the seams of the panel that you folded and pinned. Don't try to trace every panel of the item at this point. ^{[7]
X
Research source}
- If you can't trace around a seam because there's another panel of fabric connected to it, you'll need to fold up the excess fabric or use the tracing wheel. Roll the tracing wheel directly over the garment since the wheel won't damage the fabric.
5
Remove the item and draw a bold line over the one you traced. Take each of the pins out so you can lift away the garment. Use a pen to draw over the traced line so it's easier to see. Now you can label the pattern piece. ^{[8]
X
Research source}
- For example, write on the piece, "center front piece."
- You can also mark any lines that are specific to that piece. For example, draw a curved line to indicate where the neckline meets the fold.
6
Draw a seam allowance around the pattern piece. Use a straight or curved tailor's ruler to make a parallel line ¹ ⁄ ₂ inch (1.3 cm) away from the edge of the pattern line you just drew. This will be the seam allowance. ^{[9]
X
Research source}
- Most commercial patterns use a seam allowance of ⁵ ⁄ ₈ inch (1.6 cm) so use whichever measurement you prefer.
7
Draw a pattern piece for each section of your garment. Roll out another piece of paper and repeat the process for each portion of the garment that you'll need to sew together. Make a note on the pattern piece if you'd like to add a closure, such as a snap, button, or zipper. ^{[10]
X
Research source}
- For example, if you're sewing a basic shirt, you might have a front center piece, back center piece, sleeve piece, and neckline.
Tip: Remember to label each piece of your pattern. This will make it easier to use the pattern later once you've forgotten which pieces are which!
8
Cut out each pattern piece. Use a sharp pair of scissors to cut out each of the pieces. Remember to keep the paper folded as needed so you don't accidentally cut your pattern pieces in 1/2. ^{[11]
X
Research source}
- If you prefer, place a cutting mat under the pieces and use a rotary cutter instead of scissors.

Community Q&A

Search

Add New Question

Question

If I want to make one for a stuffed animal, how would that work?

Community Answer

I take Styrofoam and stack it until it is the depth of the stuffed animal. Then I carve out the shape I want, then pin and cut fabric to fit the form. Then I trace the pieces onto a pattern paper, and then I have a pattern for a stuffed animal.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 14 Helpful 56
Question

Do you have to make two patterns or can you only use one?

Community Answer

Just one is fine.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 16 Helpful 28
Question

Should I mark a grain line, and if so, how do I go about doing this?

Community Answer

You can mark a grain line, but it isn't necessary. If you want to do mark it, do so in dashes or dots.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 13 Helpful 20

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Once you feel comfortable making simple patterns, try making pants or shorts patterns. These frequently use darts so they're a bit challenging for the beginning pattern maker. ^{[12]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
You can lay weights on your garment to help it stay in place while you're pinning it to the paper.

Thanks
Helpful 1 Not Helpful 0
Leave at least 1 inch (2.5 cm) of space between each pattern piece you draw on your paper. This will make it easier to cut out.

Thanks
Helpful 0 Not Helpful 0

Show More Tips

Tips from our Readers

The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.

Don't feel discouraged if your first patterns are not as good as you'd want them to be. This is a new skill after all! Trust the process.
Recycled wall calendars and posters make good templates for patterns (once you've worked out your pattern pieces).

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Things You'll Need

Drafting a Pattern Using Your Measurements

Pattern paper
Ruler
Pencils
Measuring tape
Scissors
Sewing pins

Making a Template from Clothing

Garment to trace
Pattern or brown postal wrapping paper
Sewing pins
Pencil, chalk, or tailor's wheel
Pen
Scissors or rotary cutter and mat
Straight or curved tailor's ruler

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

Log in

How to Make Your Own Sewing Patterns

Steps

Drafting a Pattern Using Your Measurements

Making Templates from Clothing

Community Q&A

Video

Tips

Tips from our Readers

Things You'll Need

Drafting a Pattern Using Your Measurements

Making a Template from Clothing

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories