How to Make Your Own T Shirt

PDF download Download Article
PDF download Download Article

Making your own clothes gives you complete control over the look and fit of what you wear. If you have a favorite t-shirt that is starting to wear thin, you can use it as a pattern to make another shirt just like it. You'll need a sewing machine to make your own t-shirts, but the money you'll save on clothes will pay for the cost of your machine. Sewing takes time and patience, so keep practicing and you'll be making your own clothes in no time.

Looking to design or screen print your t-shirt instead? Jump to a step-by-step guide to that process here .

Part 1
Part 1 of 3:

Making a Pattern

PDF download Download Article
  1. Making your own pattern requires some special supplies, most of which you can find online, or at your local craft store. If you plan on making a lot of clothes, consider investing in a cardboard Pattern Cutting Board. You can use any large piece of cardboard, but Pattern Cutting Boards have grid lines to make measuring easier. Acrylic rulers, also known as quilting rulers, are made especially for cutting fabric. You can buy rolls of tracing paper, or you can use medical exam table paper. [1]
    • Straight pins
    • A pencil
    • A cardboard Pattern Cutting Board, or large piece of cardboard
    • An acrylic ruler
    • Tracing paper
    • A measuring tape
    • Scissors
    • A t-shirt
  2. Give yourself plenty of room to work with, and unfold your cardboard. Cut a piece of tracing paper that is a little bigger than the t-shirt you'll be measuring and lay it on the cardboard.
    Advertisement
  3. Fold your t-shirt in half vertically, with the front half of the t-shirt on the outside. Lay the folded t-shirt on the paper and smooth it out.
    • Use your straight pins to start pinning the seam lines. Keep the pins upright and push them into the cardboard. Use more pins along curved seam lines to get a more accurate measurement.
  4. Once you've pinned all the way around the shirt, remove the pins and lift the shirt off the paper. You should be able to see the holes you made.
  5. Mark the holes with your pencil so they're easier to see. Use your ruler to start connecting the dots until you've outlined the entire half of the t-shirt.
    • After you've traced the entire shirt, go back through and round out the corners on the neckline and the armhole.
    • When you've finished tracing your pattern, label it. Include the original garment type, the size, and which piece of the pattern it is. In this case, you measured the front of the shirt. Remember to mark the fold line of your pattern. Make a note to cut one on the fold.
  6. Fold the t-shirt in half, but this time make sure the back of the shirt is on the outside. Lay it on the tracing paper and pin the seams.
    • Remember to mark the fold line and label this piece of the pattern as the back of the shirt.
    • The neckline, armholes, and hemline on the back of the shirt may be a little different than the front. Try to pin accurately so you have good measurements.
  7. Pinning the sleeves is a little different than pinning the front and back of the shirt. Flatten the sleeve on the paper and pin the seams. Keep the sleeve as flat as possible.
    • Follow the same tracing process as you did with the front and back of the shirt. When you label the sleeve piece, make a note that you will need to cut two on the fold.
  8. Turn your shirt inside out and match up the shoulders. Pin the four corners of the neckband. Place some pins in the center of the neckband as well.
    • Use your ruler to make the neckband piece a rectangle. The neckband is folded in half, so make sure you double the width on your pattern piece. Subtract about an inch from the length of the pattern to account for the stretch of a neckband. Label the pattern piece accordingly, and make a note to cut one on the fold.
  9. Use your ruler and go back through your pattern pieces and add about 1/2" seam allowance.
    • Measure the hems on the sleeves and shirt bottom and add that amount to the corresponding pattern.
  10. Cut each piece out around the outer edge. Leave some space so that you are not cutting along the seam allowance lines. You should have a total of four pieces: one sleeve, one front, one back, and a neckband.
    • Make sure each piece is properly labeled. You can store your pattern in a folder or a large envelope.
    11. Advertisement
Part 2
Part 2 of 3:

Cutting the Fabric

PDF download Download Article
  1. It's a good idea to wash your fabric before you start sewing. Some fabrics will shrink when they're washed, resulting in a poor fit. Washing beforehand will prevent this. [2]
    • Think about what type of fabric you want to make your t-shirt from. Fabrics fall into two basic categories. There are knit fabrics and woven fabrics. Most shirts use a knit fabric, which is softer than woven fabric. [3]
    • Knit fabrics stretch easier than woven fabrics, making them a little more difficult to work with. However, the added stretch of knit makes for a more breathable garment.
    • Press your fabric after you wash and dry it. You want the fabric to be as smooth as possible before you start working with it. [4] If you're worried about your iron ruining your fabric, do a test press on a small scrap. [5]
  2. Give yourself plenty of room to work. Try to work at a table rather than on the floor. [6] You need a hard surface to make sure you get the fabric as smooth as you can. Cutting on a soft surface can also yield inaccurate cuts.
    • Fold the fabric in half, making sure the selvages are together. Selvages are the woven edges of the fabric. [7]
    • Your fabric will have a "right side" and a "wrong side." The right side is the front of the fabric. It will be easier to tell the right side of the fabric if it has a pattern on it. When you fold your fabric, keep the right sides facing each other. [8]
    • Keep the fabric as smooth as possible when you lay it out. [9]
  3. Take the pieces of your pattern and arrange them on your fabric according to your cutting instructions. Some pattern pieces will say "cut one on the fold," or "cut two on the fold." Line these pieces up along the fold of your fabric. [10]
  4. Use straight pins to pin your pattern pieces to your fabric before cutting. Pin the corners of your pattern first, and then pin along the edges.
    • If you prefer, you can weigh the fabric and then use chalk to draw an outline on your fabric.
  5. Hold the fabric down with one hand, and use your other hand to cut the fabric. Take your time cutting. Use long strokes, and keep the scissors at a 90-degree angle to your cutting surface.
    6. Advertisement
Part 3
Part 3 of 3:

Sewing Your Shirt

PDF download Download Article
  1. Take the front and back pieces of your shirt line them up. Make sure the right sides are facing each other, and pin them together at the shoulders.
    • Sew the shoulders together using a straight stitch on your sewing machine. When you're finished sewing the pieces together, iron out the seams.
  2. Take the piece of fabric you cut for your neckband and sew the two short ends together using a straight stitch. Your neckband should now be a loop. [11]
    • Fold the neckband piece in half lengthwise with the wrong sides together. Pin the edges and sew them together using a narrow zig-zag stitch.
  3. Take your shirt and lay it open. Flatten the shoulders and pin the neckband to the neckline on the right side of the fabric.
    • Pin the neckband at the shoulders first, and then the center and back. Once you've pinned the neckband at these four points, put one more pin between each point.
    • You may have to stretch the neckband to get it to fit in the neckline. This is okay. You want the neckband to be smaller than the neckline so that you have a comfortable fit.
  4. Use either a straight stretch stitch or a zig-zag stitch. You want a stitch that will stretch with the fabric. [12]
    • Sew one section at a time, stretching the fabric of the neckband as you go. As you finish a section, remove the pins and make sure the fabric of the shirt is not pleating beneath the neckband.
    • When you finish sewing the neckband, go over it with an iron to press the seams.
  5. Lay the shirt out flat and pin the middle of the sleeve curve to the middle of the armhole. Keep the right sides of the fabric together.
    • Pin the sleeve along each side of the armhole. Use a straight stitch to sew the sleeve onto the shirt. Repeat this process with the other sleeve.
    • Once you have attached both sleeves to your shirt, iron the seams.
  6. Keep the right sides of the fabric together and pin along the sides of the shirt. Pin the sleeve sides first and work your way down to the hemline.
    • Use a straight stitch to sew the sides of the shirt together. Start at the end of the sleeve and work your way down the side of the shirt.
    • Fold between 1/2" to 1" of fabric under the bottom edge of the shirt. Iron this fabric down and use either a straight or zigzag stitch to sew your hem. Press the hem once more when you have finished sewing.
  7. 7
    Now cut out what you want on your shirt on paper. Color it. Then iron it on.
    8. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you make a shirt from scratch?
    Korri Burton-Universe
    Professional Tailor
    Korri Burton-Universe is a Professional Tailor and the Owner of Uncommon Closet, a custom clothing and tailor resource for the LGBTQIA+ community and those with body types often overlooked by major clothing chains and shops. Korri specializes in custom clothing, tailoring services, and wedding clothes for people of all identities, genders, races, and sizes. Uncommon Closet creates a safe space for people to find or make outfits that make them feel safe and powerful.
    Korri Burton-Universe
    Professional Tailor
    Expert Answer
    Ask someone to take your measurements. Lay the fabric on a desk and cut it. Press it. Then sew it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 12 Helpful 6
  • Question
    What should I keep in mind while taking the measurements?
    Korri Burton-Universe
    Professional Tailor
    Korri Burton-Universe is a Professional Tailor and the Owner of Uncommon Closet, a custom clothing and tailor resource for the LGBTQIA+ community and those with body types often overlooked by major clothing chains and shops. Korri specializes in custom clothing, tailoring services, and wedding clothes for people of all identities, genders, races, and sizes. Uncommon Closet creates a safe space for people to find or make outfits that make them feel safe and powerful.
    Korri Burton-Universe
    Professional Tailor
    Expert Answer
    Be careful while taking the measurements so that the shirt is comfortable. It should not be very tight or loose.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 7
  • Question
    What measurements should I have to make a shirt?
    Korri Burton-Universe
    Professional Tailor
    Korri Burton-Universe is a Professional Tailor and the Owner of Uncommon Closet, a custom clothing and tailor resource for the LGBTQIA+ community and those with body types often overlooked by major clothing chains and shops. Korri specializes in custom clothing, tailoring services, and wedding clothes for people of all identities, genders, races, and sizes. Uncommon Closet creates a safe space for people to find or make outfits that make them feel safe and powerful.
    Korri Burton-Universe
    Professional Tailor
    Expert Answer
    You will have to measure your neck, chest, waist, hip, and shoulders. You should also know the length of the shirt and sleeves.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 5
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Tie a T-Shirt or Button-Down Shirt
      A Step-by-Step Guide to Stretching Out Tight Shirts
      How to
      Stretch a Polyester Shirt
      3 Easy Ways to Paint a T Shirt
      How to
      Design Your Own T Shirt
      Your Guide to Shrinking a Shirt to the Perfect Size
      How to
      Keep a Shirt Tucked in
      How to
      Screen Print a T Shirt
      How to
      Stretch a Shirt
      How to
      Wear Flannel Shirts
      How to
      Remove Wrinkles from T‐Shirts Without Ironing
      How to
      Shrink Preshrunk Shirts
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=PF4MCiRNNFM
      2. ↑ https://www.youtube.com/watch?v=P9k9Spc28vo
      3. ↑ https://www.youtube.com/watch?v=P9k9Spc28vo
      4. ↑ Korri Burton-Universe. Professional Tailor. Expert Interview. 12 January 2021.
      5. ↑ https://www.youtube.com/watch?v=MjXW_KQycH8
      6. ↑ Korri Burton-Universe. Professional Tailor. Expert Interview. 12 January 2021.
      7. ↑ https://www.youtube.com/watch?v=MjXW_KQycH8
      8. ↑ https://www.youtube.com/watch?v=yJLWHX63nBE
      9. ↑ https://www.youtube.com/watch?v=VM0lN4qvJQk
      1. ↑ https://www.youtube.com/watch?v=3TdwewCWsZU
      2. ↑ https://www.youtube.com/watch?v=VM0lN4qvJQk
      3. ↑ Korri Burton-Universe. Professional Tailor. Expert Interview. 12 January 2021.

      About This Article

      Article Summary X

      To make your own t-shirt, start by pinning a t-shirt that already fits you onto a piece of tracing paper. Then, trace your patterns for the front, back, sleeves, and neckband of the shirt, with ½ inch added around the outline for seam allowance. Next, pin your patterns onto the fabric, cut out your fabric pieces, and sew the shoulders together. Afterwards, sew the neckband to the neckline, and the sleeves to the arm holes. Finally, sew the side seams, starting from the end of the sleeve and working your way down the side of the shirt. To learn more, like how to hem the sleeves and the bottom of your t-shirt, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 188,908 times.

      Reader Success Stories

      • Monica White

        May 12, 2021

        "Who doesn't love a great fitting T-shirt? Now I'm able to design and make custom T-shirts using ..." more
      Share your story

      Did this article help you?

      Advertisement