7 Simple Steps to Hide Your Wireless Network

PDF download Download Article
A step-by-step guide to hiding your SSID and making your wireless network invisible
PDF download Download Article

Hiding your wireless network or SSID is one of the best things you can do to increase the security of your home network system. It makes it much more difficult for people to mooch off of your WiFi and also makes it harder for hackers to access your system and steal important information. Especially if you live in an apartment complex, securing your wireless network is an important consideration to make.

How to Hide Your Wireless Network

Memorize or write down your wireless network's SSID or network name so you don't forget it. Go to your router's settings in a web browser, and navigate to the "Home/Wireless network/WLAN" page. Uncheck the option to broadcast the SSID to hide your network.

Steps

PDF download Download Article
  1. If you have never logged in to your router before, you will first need to figure our your router's IP address. The default address for almost all systems is "192.168.1.1." In order to login to your router , enter this address into your browser when you are connected to your network. [1]
    • If the above address does not take you to a page that prompts you to enter login credentials, consult your router's manual. You can also try looking at the label on your router which lists information like network key, SSID, and encryption key. This label is usually found on the bottom of most routers.
    • You can also check this page for common default IP addresses. One of these will likely take you to your router login page when entered into your browser's address bar.
  2. If you entered the right IP address, you will be prompted to log in with a username and password. Hopefully you have set this to be something other than the default. If not though, consult your router's manual for the default username and login information. [2]
    • If you have never customized the login information, it is likely that the username will be "admin" and the password will be blank. Be sure to change this at some point to increase your network's security.
    Advertisement
  3. This will be the section of the control panel that will let you modify certain default settings for your network. [3]
  4. The option may say "Hide SSID." Making this change will stop your browser from automatically broadcasting its name to anybody with a Wi-Fi-capable device. Know, however, that anybody who you want to connect to your network will now have to enter the network's name into their device.
  5. If you are trying to make your network invisible, you are likely worried about people accessing your network. Hiding your SSID will not really help that much. Hackers can still intercept the radio waves constantly being sent out from your router and access your network. Make these changes in the same part of the admin panel in which you hid your SSID to make your network more secure :
    • Enable MAC filtering. MAC (Media Access Control) addresses are identifiers that all Wi-Fi-capable devices carry. If you enable MAC filtering, you will have to manually enter what addresses have access to your wireless network. In order to find out what your device's MAC address is, consult our article about how to find your MAC address .
    • Enable WPA2 encryption. WPA2 encryption is one of the best ways to increase your network's security. Navigate to the security section of your network's control panel. Select WPA2 from any dropdown menu or option list. You will be prompted to enter a PSK (Pre-shared key). This will be the key that any device that connects to your network will have to enter before it can access the network. Keep it in a safe place and make it as long as possible.
      • Note that older routers (pre-2007) will not have WPA2 capabilities.
  6. Depending on your router's manufacturer, this can say something else that's similar, like Save . Your modifications have now been changed.
  7. Every wireless network has an SSID (Service Set Identifier). The SSID is a sequence of characters, with a max of 32 characters, which uniquely marks your wireless network. Think of it like your network's name. By default, most systems will broadcast this SSID to make it easier for you to find and use. However, this also lets people with malevolent intentions get access to your network.
    • The SSID is what you will actually be hiding when the process is complete.
    • If you have ever accessed a wireless network at a restaurant or a coffee shop, you have used an SSID. At many restaurants or coffee shops, the SSID will be the name of the place.
    • *Never do this without making a note of your network's SSID or name. Otherwise, it can be a painful hassle to find it again.
    • If you ever need to undo this action and re-broadcast the SSID, log in again and perform the same steps, but make sure the "Broadcast" option is selected. If your computer can't connect to the Wi-Fi network , connect it to your router with an ethernet cable and continue.
    8. Advertisement

Community Q&A

Search
Add New Question
  • Question
    After I uncheck the "enable SSID broadcast", then what will I do?
    Community Answer
    Then you are done! Your network is now invisible. You can close out of the configuration page.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 14
  • Question
    How can you hide your WiFi network with a TP-Link router?
    Community Answer
    In Wireless Settings, uncheck "Enable SSID Broadcast".
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 24
  • Question
    I hide my WiFi, but then I can't connect. What do I do?
    Community Answer
    You usually need to select "Other" or "Hidden network" on the device and then type in the SSID.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 19 Helpful 29
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • You'll need to know the network name or SSID to connect to the network since it's not broadcasted.
        Thanks
        Helpful 2 Not Helpful 0
      • If you don't know the network name or SSID, you can't use your phone or tablet to log into the router and turn the option to broadcast back on. You'll need a computer with an ethernet connection to do that.
        Thanks
        Helpful 0 Not Helpful 1
      Advertisement

      You Might Also Like

      4 Simple Ways To Add an HP Printer to a Wireless Network
      How to
      See Who Is Connected to Your Wireless Network
      Mirror Your Screen to a TV: Miracast, Chromecast & Wireless HDMI
      How to
      Connect a Router to a Modem
      Easy Ways to Change the Wi-Fi Network Name
      How to
      Locate the SSID On Your Computer (Windows & Mac)
      How to
      Set Up and Connect to a Wi-Fi Network: Easy Guide
      How to
      Reset Your Router Password
      How to
      Find the WiFi Password of a Past Connection Using Command Prompt (CMD)
      10 Easy Steps to Set Up a Wireless Router
      How to
      Use a Router As a Switch
      Set Up a Wireless Hotspot on Windows with Command Prompt
      How to
      Jam a Network
      Data Roaming: Should You Turn It On or Off?
      Advertisement

      References

      1. ↑ https://edu.gcfglobal.org/en/basic-computer-skills/how-to-set-up-a-wifi-network/1/
      2. ↑ https://edu.gcfglobal.org/en/basic-computer-skills/how-to-set-up-a-wifi-network/1/
      3. ↑ https://edu.gcfglobal.org/en/basic-computer-skills/how-to-set-up-a-wifi-network/1/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 463,740 times.

      Reader Success Stories

      • Sarat Warsi

        Sep 3, 2016

        "It was very difficult to hide, but you helped."
      Share your story

      Is this article up to date?

      Advertisement