PDF download Download Article
Sew cost-effective bean bags for entertaining friends and family
PDF download Download Article

Bean bags come in different shapes, sizes, and uses. You can use it for tossing around with your friends during a game of cornhole or as a super comfy chair for entertaining. However, the amount of fabric and beans you’ll need to make your bag all depends on how big you want it. Fortunately, whether you’re looking to play a game or relax, both projects require the same materials and basic methods. Follow this guide to get started!

How do you make a bean bag?

  1. Cut out two 5x5 inch (13x13 cm) fabric squares and lay them right-sides together.
  2. Align the edges and sew them together, leaving an open 3-inch gap on one side.
  3. Flip the fabric inside out and use a funnel to fill the bean bag with dried beans or rice.
  4. Stitch the gap closed with a straight stitch.
  5. Start tossing!
Method 1
Method 1 of 2:

Sewing Throwing Beanbags

PDF download Download Article
  1. Watermark wikiHow to Make a Bean Bag
    Grab a durable fabric such as cotton twill or canvas for throwing beans. Using a ruler, mark the fabric with a pencil or washable market at the 5 in (13 cm) mark. Cut two square pieces with a pair of scissors or a rotary blade . [1]
    • You can use scrap fabric or old t-shirts to make this DIY. However, cotton twill can cost $4 per yard, while canvas can cost $9 per yard.
    • Cut two squares for each bean bag. For instance, if you want 12 throwing bean bags, cut 24 squares of equal size.
    • When using a rotary blade, place a cutting board beneath the fabric to avoid damaging your tabletop surface or floors.
  2. Take one of the pre-cut squares and lay it facing up with the design. Then, take another piece and lay it face down over the top of the other piece. Ensure the edges are perfectly aligned for sewing. [2]
    • To avoid wrinkles, iron the fabric on an ironing-safe surface.
    Advertisement
  3. Watermark wikiHow to Make a Bean Bag
    Before you begin sewing, stick sewing pins or clips along three of the square’s edges to hold them in place. Set your sewing machine to the straight stitch setting and feed the fabric under the foot. Set the foot down and begin stitching with a 1 2  in (1.3 cm) inseam. Stitch all the way around until you’re about 3 in (7.6 cm) away from where you started to leave a gap for filling and turning the fabric. [3]
    • Always start and finish your stitches with a backstitch for a secure hold.
    • You can also stitch the bean bag by hand using a straight stitch . Weave a threaded needle in and out of both layers of fabric.
    • As you are sewing around the edge, hold the pieces of fabric tightly together with your hands. However, make sure to keep your fingers away from the needle.
  4. Watermark wikiHow to Make a Bean Bag
    Using the small gap that’s left, flip the fabric inside out. Go back in with your fingers to poke the corners so they’re sharp. Grab a small funnel and slowly pour in dried beans or rice. Try to leave at least 1 2  in (1.3 cm) of fabric empty on the side so the beans can move around. [4]
    • Alternatively, you can use dried corn, peas, popcorn kernels, or small bits of gravel to fill the bean bag.
  5. Take the loose edges of the fabric and place them back beneath the sewing machine’s foot. If it helps, you can pin the gap closed. Remove the pins as you close the gap. Now, you have a completed beanbag! Repeat the previous steps until all of your bean bags are made. [5]
    • You can also repeat these steps to make an outer liner for throwing bean bags. Then, instead of filling the bag with beans, slip the cover on top and stitch it closed.
  6. Advertisement
Method 2
Method 2 of 2:

Making a Beanbag Chair

PDF download Download Article
  1. Cut two large pieces of upholstery-weighted fabric . Fortunately, bean bag chairs can be as wide as you want. However, for a kid’s friendly chair, cut two fabric pieces to 45 in (110 cm) by 32 in (81 cm) with a pair of fabric scissors or a rotary blade. [6]
    • Upholstery-weighted fabric can cost $4 per yard.
    • Alternatively, you can use cotton-polyester blended fabrics, which can cost as little as $3 per yard.
    • You can use matching fabric or two coordinating patterns for a two-toned look.
    • A beanbag chair 42 inches wide is large enough for teenagers or adults, while an extra-large one is produced by cutting it 56-70 inches wide.
  2. Turn the fabric so the right sides face each other and the wrong side faces you. Then, feed the long raw edges under the foot of the sewing machine. Set the machine to the straight stitch setting using the dial to sew tight stitches along both long edges. Leave both of the shorter ends of the fabric open for now. [7]
    • To prevent fraying, use a zigzag stitch on the sewing machine before sewing with a straight stitch. However, this is optional.
  3. Align the long sewn sides of the fabric by folding it in half. Ensure the edges are as even as possible. Then, starting from the folded inside corner, use fabric scissors to round one end or cut a diagonal line to remove approximately 6 in (15 cm) of material. Open the fabric back up to reveal a symmetrical curve or tear-drop shape. [8]
    • Folding the fabric in half ensures the fabric is cut evenly.
  4. Feed the fabric back under the foot of the sewing machine. Set the foot down to hold the fabric in place. If you’d like, pin the curved or diagonal edge to keep it secure. Select a straight stitch setting and press your foot on the peddle to begin. Remove the pins as you sew.
    • Switch to a zigzag stitch setting first if you’d like to prevent fraying before laying down a straight stitch using the machine’s dial.
    • Sew a straight stitch by hand by simply weaving a threaded needle in and out of both layers of fabric in a straight line.
  5. If you’d like to add more filling as time goes on, add a zipper to the remaining unsewn edge. We’re using a 22 in (56 cm) zipper for this project. However, measure the length of your bean bag for reference. Attach the zipper using a straight stitch on either side of the fabric. [9]
  6. Watermark wikiHow to Make a Bean Bag
    Turn the fabric inside out through the open end and pour in one bag of 100 liter bean bag filling. Once it’s filled, sew the hole by hand using a threaded needle and a straight stitch. [10]
    • If you added a zipper, simply zip it shut once it’s filled.
    • Bean bag filling can cost $18 per bag. Alternatively, you can use standard stuffing material, dried beans, plastic chips, or polyester pellets.
    • Avoid overstuffing the chair so the beans can move freely around your body.
    • Depending on your bean bag chair size, add an extra 50 liters or another full bag for teenagers and adults.
  7. Advertisement

Video

Community Q&A

Search
Add New Question
  • Question
    How tall will my bean bag be?
    Community Answer
    It depends on the size of your bean bag and how much you fill it up. Less filling might make shorter, while more filling may make it taller. But keep in mind that when you use the filling, you might need to fill it up again with new beans to fluff it back up.
  • Question
    What should be used to fill the inside?
    Community Answer
    You can get bean bag fillings in some stores, and online, which are really good to use. Otherwise, chickpeas, beans, and toy stuffing are all good choices.
  • Question
    Could I use a very large shirt to make a beanbag?
    Community Answer
    You could, but you'd likely find that it's too small, even with the largest of shirts.
See more answers
Ask a Question
      Advertisement

      Tips

      • Take your time and be patient. It is best to get a smooth stitch line than to rush and not secure the inner part of your beanbag.
      • Use mix-matched fabric on your beanbags to create fun color combinations and assign beanbags to different players/students.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You Need

      Making Throwing Bean Bags

      • Sewing machine or thread and needle
      • Ruler
      • Pencil
      • Scissors or rotary blade
      • Cotton polyester blended-fabric (25 x 25 inches)
      • Dried beans, corn, peas, beads, or pebbles
      • Funnel

      Making a Beanbag Chair

      About This Article

      Article Summary X

      To make a bean bag chair, start by cutting out two large circles of fabric that are about the same diameter as you’d like your finished chair to be. Next, place the circles of fabric on top of each other, with the right sides facing each other. Then, sew around the edges of the fabric twice, so that there is a 1/2 inch seam as well as a 3/4 inch seam, leaving a hole that’s big enough to fit your hand in. Finally, turn the fabric right side out through the hole and fill it with beans or polyester pellets before sewing up the hole by hand. For tips on how to make smaller bean bags to play games with, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 631,258 times.

      Reader Success Stories

      • Ellie

        Feb 4, 2021

        "I started of with a very weak piece of fabric when making a bean bag, then I found out it was weak so I redid it ..." more
      Share your story

      Did this article help you?

      Advertisement