How to Make a Braided Horse Rein

PDF download Download Article
PDF download Download Article

Reins are an important part of horseback riding. They connect the rider to the horse and allow the rider to give it commands. While you can always buy reins from an equestrian-supply shop, making your own is easy. Best of all, you can choose your own colors to suit your tastes. Paracord is a great choice, due to its strength, durability, and vast range of colors, but you can try another material if you really want to.

Method 1
Method 1 of 2:

Using Conway Buckles

PDF download Download Article
  1. Measure and cut one cord first, then use it as a guide for cutting the others. You can use however many colors you want, but keep the color combination in mind. [1]
    • If you want a thinner set of reins, cut 6 strands instead.
    • Most packs of paracord will be close to the right length. If they are too long by 12 or 24 inches (30.48 or 60.96 centimeters), you don't have to cut them.
  2. If you are using more than one color, arrange the cord in the combination you want. For example: green-black-green, blue-black-blue, purple-black-purple. [2]
    Advertisement
  3. Seal the cords in groups of 3 first, then join the groups together. Keep the cords flat as you seal them; do not bundle or clamp them together. [3]
    • If you are making a 6-cord braid, seal the cords in groups of 2 first.
    • A stick lighter will work better than a regular lighter. You can also use a heating tool, such as a hot knife.
  4. Hang the binder clip from a hook or nail. Make sure that it is at a comfortable working height for you. [4]
  5. The first three cords on the left will be your first group. The three cords in the middle will be your second group. The last three cords on the right will be the third group. [5]
    • If you used six cords, then separate the cords into groups of two.
  6. Take the 3-cord group on the left. Cross it over the middle group. Next, take the 3-cord group on the right, and cross it over the middle as well. Keep braiding like this until you are close to the end of your desired length. [6]
    • Keep the groups flat at you braid them. Do not twist and turn them. Make sure that all of the colors are visible.
  7. When you reach the desired length, place another binder clip over the cords. Cut the cords just below the clip, then heat-seal them as before. Once the cords cool, remove the clip. [7]
  8. Turn the buckle so that the pin/needle is facing up. Feed the braid up through one end of the buckle. Loop it loosely over the pin, then back down through the other end. Do not press the braid into the pin yet. [8]
  9. Make sure that you are feeding the braid between the existing braid and the buckle itself. You want the end of the braid to be caught between the buckle/pin and the rest of the rope. [9]
  10. Repeat the process on the other end of the braid with another conway buckle and trigger snap hook. [10]
    11. Advertisement
Method 2
Method 2 of 2:

Without Using Conway Buckles

PDF download Download Article
  1. The first two strands need to be twice the length you want your finished reins to be. The next two strands need to be four times the length. [11]
  2. Take the ends of the two short paracords. Heat both of them up with a lighter, then quickly press them together, end-to-end, so that you have a longer cord. [12]
  3. Push the jointed end of the paracords through the eye of your trigger snap hook by about 1 inch (2.54 centimeters). Feed the tail ends through the loop, then tug down on them to tighten the knot. [13]
  4. Take the two longer cords, and feed them through the eye as well, but don't tie them in a slip knot. You want the cords to be centered and even on both sides. You'll have two strands on each side of the slip knot. [14]
  5. The first two strands on the left will be your first group. The next two strands in the middle will be your second group. The last two strands on the right will be your third group. [15]
  6. Take the 2-strand group on the left, and cross it over the 2-strand group in the middle. Take the last, 2-strand on the right, and cross it over the middle one as well. Continue braiding the cords until your reins are the length you want them to be. [16]
    • Keep the strands flat as you braid them. Don't let them twist or flip.
  7. Feed all of the cords through the eye of your second trigger snap hook. Take the group on the left, and weave it back into the braid. Repeat the process with the other groups. [17]
    • Follow the pattern of the braid as best you can.
    • Do this for about 4 to 6 inches (10.16 to 15.24 centimeters).
  8. Cut any excess paracord off, as close to the braid as you can. Heat the ends of the cords, then press them flat against the braid. [18]
    • It will be easiest to do this with a heat tool, such as a hot knife, rather than a lighter.
    9. Advertisement


Community Q&A

Search
Add New Question
  • Question
    What size are conway buckles?
    ReebokBeebok
    Community Answer
    They can come in a variety of sizes, the most common being: 13mm, 16mm, 19mm, and 25mm, That's the same as 1/2", 5/8", 3/4" and 1".
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 7
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Make sure that you use heavy-duty conway buckles and trigger snap hooks. Get them from a store that sells tack-making supplies.
        Thanks
        Helpful 0 Not Helpful 0
      • Paracord is a great choice for reins because it is strong and it dries fast.
        Thanks
        Helpful 0 Not Helpful 0
      • You can try this tutorial using other types of rope and cording, but be aware that it may not be strong enough.
        Thanks
        Helpful 1 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Using Conway Buckles

      • Paracord
      • Scissors
      • Binder clip
      • Lighter
      • 2 trigger snap hooks
      • 2 conway buckles

      Without Using Conway Buckles

      • Paracord
      • Scissors
      • Binder clip
      • Lighter
      • 2 trigger snap hooks

      You Might Also Like

      How to
      Harness a Horse
      How to
      Shoe a Horse
      How to
      Make a Haynet
      How to
      Build a Schooling Standard Horse Jump
      How to
      Make a Leather Riding Crop
      How to
      Build a Round Pen
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about caring for horses, check out our in-depth interview with Ted & JoAnn Dawson .

      References

      1. ↑ https://www.youtube.com/watch?v=ibiyKC1JilY
      2. ↑ https://www.youtube.com/watch?v=ibiyKC1JilY
      3. ↑ https://www.youtube.com/watch?v=ibiyKC1JilY
      4. ↑ https://www.youtube.com/watch?v=ibiyKC1JilY
      5. ↑ https://www.youtube.com/watch?v=ibiyKC1JilY
      6. ↑ https://www.youtube.com/watch?v=ibiyKC1JilY
      7. ↑ https://www.youtube.com/watch?v=6Z8ozpKCNsg
      8. ↑ https://www.youtube.com/watch?v=6Z8ozpKCNsg
      9. ↑ https://www.youtube.com/watch?v=6Z8ozpKCNsg
      1. ↑ https://www.youtube.com/watch?v=ibiyKC1JilY
      2. ↑ https://www.youtube.com/watch?v=q6-s1hFTaoo
      3. ↑ https://www.youtube.com/watch?v=q6-s1hFTaoo
      4. ↑ https://www.youtube.com/watch?v=q6-s1hFTaoo
      5. ↑ https://www.youtube.com/watch?v=q6-s1hFTaoo
      6. ↑ https://www.youtube.com/watch?v=q6-s1hFTaoo
      7. ↑ https://www.youtube.com/watch?v=q6-s1hFTaoo
      8. ↑ https://www.youtube.com/watch?v=q6-s1hFTaoo
      9. ↑ https://www.youtube.com/watch?v=q6-s1hFTaoo

      About This Article

      Article Summary X

      To make a braided horse rein, start by cutting 2 strands of paracord that are twice the length you want your finished rein to be and 2 strands that are 4 times the length. Then, burn the ends of the 2 shorter paracord strands together with a lighter. Next, feed the joined ends of the paracords through the eye of a trigger snap hook, and feed the tail ends through the loop to make a slipknot around the hook. Once you've done that, feed the ends of the other 2 paracord strands through the eye of the hook so you have 2 strands on each side of the slipknot. Now, separate the strands into 3 groups of 2, and braid them together until you reach your desired length. When you reach the end, feed the strands through a second trigger snap hook, and weave the ends back into the braid. Finally, cut the excess paracord off, and burn the ends with a lighter. To learn how to make a braided horse rein using conway buckles, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 45,881 times.

      Reader Success Stories

      • Heather Ryder

        Jul 11, 2021

        "Going to be making these for a horse rescue fundraiser. Thank you for the article."
      Share your story

      Did this article help you?

      Advertisement