How to Make a Cooler from Insulating Material

PDF download Download Article
PDF download Download Article

There are lots of ways to make a homemade cooler using readily available insulating materials. Using a lidded box, foil, and recycled packaging materials, you can make a small, simple cooler. For a larger, more effective design, line a cardboard box with foam board. If you need something more portable, you could also sew an insulated lunch bag to keep items cold when you’re on the go.

Method 1
Method 1 of 3:

Making a Simple Cooler

PDF download Download Article
  1. Glue the aluminum foil to the outside of the box and lid. Go with a box that’s large enough to hold the items you’d like to keep cold. A shoe box or small plastic tote, for instance, would work well if you just need to store your lunch. [1]
    • Attach the foil to the box so the shiny side faces out. The more light the foil reflects, the less heat the box will absorb.
    • Smooth the foil after you apply it, so that it wouldn't be wrinkling too much.
    • If you’re using a cardboard box, glue foil onto the inside, too. Use a single sheet of foil large enough to cover the entire interior. Carefully mold the foil into the corners, and try not to tear it. Lining the inside with foil can help keep the cardboard from getting soggy.
  2. Glue your insulating material to the lid’s underside and to the bottom and sides of the box’s interior. Recycled packaging materials, thick nylon, or cotton are all good choices. [2]
    • Avoid covering the lip of the lid with insulating material, and make sure it can still fit over the box.
    Advertisement
  3. Place an ice pack and the items you’re storing into the box, then cover it with the lid. If you used a plastic container, it should seal tightly. To seal a cardboard box, place a sheet of foil over the lid, fold it over the sides, then crumple it tightly around the box. [3]
    • The box should keep your items cold for about 4 hours. If possible, keep the box away from direct light and sources of heat.
    4. Advertisement
Method 2
Method 2 of 3:

Creating an Insulated Box

PDF download Download Article
  1. Use a pair of scissors or utility knife to cut off the top flaps. Keep in mind you’ll be building layers of foam about 6 in (15 cm) thick inside the box. Choose a box large enough to hold all of that insulation and still have room to store foods and drinks. [4]
    • For example, if you use a 24 by 24 in (61 by 61 cm) box, the space available for storage will be 18 by 18 in (46 by 46 cm).
    • A cardboard box is the easiest choice, but a large plastic tote would work. You could also make your own box out of wood. [5]
  2. Place a trash bag, or another type of waterproof material, into the box as if you were lining a trash can. Press the bag into the box’s corners, and take care not to tear the bag. Keep the bag flat against the sides of the box, then trim the bag so it’s flush with the top of the box. [6]
    • Duct tape the bag to the top of the box; add strips of tape along the box’s entire top edge. Give the bag some slack so there’s extra material at the bottom corners. It’ll tear easily if it’s too tight.
    • The waterproof layer will help keep melted ice or condensation from getting the cardboard soggy. A trash bag is inexpensive and readily available, but a shower curtain or plastic tablecloth would be sturdier.
  3. Use craft foam boards or sheets of foam board insulation. Measure the box’s bottom and sides, cut a panel that matches the box’s bottom, and make the side panels 2 in (5.1 cm) shorter than the box. [7]
    • Cut 2 of the side foam panels 2 in (5.1 cm) shorter to account for the thickness of the other 2 panels. Suppose you have a 24 by 24 by 24 in (61 by 61 by 61 cm) box; make 2 of the panels 24 in (61 cm) long. Since the panels are each 1 in (2.5 cm) thick, make the other 2 panels 22 in (56 cm).
    • Cut with the grain of the foam to keep the edges straighter.
  4. Start by gluing the bottom board to the base of the box. Take care not to tear the waterproof layer. Then glue a foam panel to each side of the box's interior. [8]
    • Once they’re glued into place, the tops of the side panels should be 1 in (2.5 cm) below the box’s top edge. Each side is 2 in (5.1 cm) shorter than the box, but the bottom foam panel adds an extra 1 in (2.5 cm) to their height.
    • To make the glue dry faster, don't use it in excess and make sure to apply it onto the dry surface.
  5. Make 2 of the panels about 4 in (10 cm) smaller in width than the sides of the box. Cut the other 2 panels 6 in (15 cm) smaller than the box’s sides. All 4 sides should be 1 in (2.5 cm) shorter than the height of the box. [9]
    • Glue the 4 panels together to make an inner box. This smaller inner box is actually the storage space. You'll fill the gap between the inner foam box and the panels that line the cardboard box with insulation. All of these layers of insulating material will help keep the cooler nice and cold.
  6. Center the foam box inside the cardboard box. There should be a 3 to 4 in (7.6 to 10.2 cm) space between the 2 sets of foam panels on all 4 sides. After double checking the fit, glue the inner foam box into place. [10]
  7. Pour vermiculite between the panels, or use spray foam insulation. If you use spray foam, pause between applications to allow the foam to expand. If it expands beyond the tops of the panels, give it an hour to dry, then trim the excess foam with a utility knife. [11]
    • In a pinch, fill the gap with packing peanuts, bubble wrap, or Styrofoam. Fiberglass insulation would also work.
  8. Cut strips of foam wide enough the cover the insulation-filled gaps. If each gap is 4 in (10 cm) wide and each foam panel is 1 in (2.5 cm) thick, the cover strips should be 6 in (15 cm) wide. [12]
    • Cut 2 of the strips, then set them over the gaps on parallel sides of the box. Measure the length between the 2 covers, then cut 2 more strips to match that length.
    • Be sure to use 1 ⁄ 2  in (1.3 cm) thick foam board for the strips to leave room for the box’s lid.
  9. Apply beads of craft glue over the foam panels that line the cardboard box and the ones that form the inner box. Then set the cover strips into place over the insulation-filled gaps. [13]
    • Remember to place the longer cover strips across from each other.
  10. Measure the perimeter of the top of the box, and cut a foam panel to match. Since the strips that cover the insulation-filled gaps are 1 ⁄ 2  in (1.3 cm) thick, there should be a 1 ⁄ 2  in (1.3 cm) lip formed by the sides of the cardboard box. This lip should hug the sides of the lid. [14]
    • If you’d like, glue handles or knobs to the top of the lid so it’s easier to remove. If you made a wooden box, you could make a wooden, foam-lined lid and join it to the box with a hinge. [15]
    11. Advertisement
Method 3
Method 3 of 3:

Sewing an Insulated Lunch Bag

PDF download Download Article
  1. Use waterproof material for the innermost layer, insulating material for the middle layer, and a fabric you find attractive for the outer layer. [16]
    • Laminated cotton, PUL lining, and vinyl are your best options for waterproof materials. If you want to stick with recycled materials, you could use a plastic tablecloth or a plastic shower curtain.
    • Thermal batting, which you can find at a craft or fabric store, is the best insulating material. If you're on a budget, you can recycle thin flexible foam or bubble wrap. Thin craft foam or packing foam might work, but the lunch bag will be stiffer.
    • Pick a durable, easy-to-clean material for the outer layer, like canvas or denim.
  2. For each material, cut a 10 by 26 1 ⁄ 2  in (25 by 67 cm) rectangle. Then cut a pair of 6 1 ⁄ 2 by 10 in (17 by 25 cm) rectangles. [17]
    • You should have 1 large and 2 smaller rectangles made of each of the 3 materials, or 9 total rectangles.
  3. Spread the outer fabric rectangles flat on your work surface. Spray a small of amount of fabric adhesive around the edges, corners, and center of the outer fabric, line up a corresponding piece of thermal batting over it, then press the fabric and batting together. [18]
    • Repeat the steps to baste the other 2 sets of fabric and batting rectangles.
    • Look for spray adhesive online or at craft and fabric stores.
    • Spray basting is the easiest method of attaching the batting to the outer fabric. You could also hold them together by pinning them 1 ⁄ 4  in (0.64 cm) from the edges.
  4. Spread out the large rectangular section of basted outer material with the right side, or outer fabric, facing up. Then lay a smaller rectangle of basted outer material over the large rectangle with the right side down. Align the upper left edges of both rectangles, and pin together their left long edges. [19]
    • Weave the pins into the fabric rectangles 1 ⁄ 4 inch (0.64 cm) from the edges.
    • Make sure the long and short sides of the rectangles are aligned. Position the rectangles so their short sides are at the top and bottom and the long sides are at the left and right.
  5. Stitch down the pinned sides of the panels 1 ⁄ 2  in (1.3 cm) from the edges. Begin at the top corner and work your way down the long side. Stop 1 ⁄ 2  in (1.3 cm) away from the bottom left corner of the side panel. [20]
    • Use this 1 ⁄ 2  in (1.3 cm) seam allowance, or the distance between the stitch line and the edge of the fabric, for all of this project’s stitches.
  6. Set the second panel over the main body with the outer fabric facing down. Align the upper right corners of the main panel and second side piece, and pin down their long sides on the right. [21]
  7. Sew along the pinned right edges of the main and side panels. Stop when you're 1 ⁄ 2  in (1.3 cm) above the side panel's bottom right corner. The result should be a mirror image of the sewed left side panel. [22]
    • Remember to use a seam allowance of 1 ⁄ 2  in (1.3 cm).
  8. Lift the left side panel up straight so it’s perpendicular to the main panel. Fold up the main panel to align its bottom left corner with the top right corner of the left side panel. Pin the panels together from the side panel’s top right corner to its bottom right corner. [23]
    • Repeat the steps to line the right panel’s top left corner with the main panel’s bottom right corner.
  9. Sew the left side panel to the main panel along the pinned edge. Stop 1 ⁄ 2  in (1.3 cm) from the bottom edge of the side panel at its bottom right corner. Then sew the right side panel to the main panel along the pinned edges. [24]
    • You should now have a rough bag shape with an open top and unstitched bottom. The long sides of both side panels should now be entirely stitched to the main panel.
  10. Sew the bottoms of the side panels' short sides to the main panel. After sewing each short side, sew additional stitch lines down the bottom of the bag’s long sides to create a flat bottom. [25]
    • All of the bag’s edges should now be stitched except for its top opening.
  11. Lay a side panel of waterproof material over the large waterproof rectangle, and align their upper left corners. Stitch together the panels’ left sides, then stitch the right side of the other panel to the main body’s right side. Fold up the main body to bring its bottom corners to the side panels’ top corners, then stitch the edges to create a rough bag shape. [26]
    • Finish by stitching around the bottom edges of the waterproof lining to flatten the bottom.
  12. Keep the inner lining right-side out, and turn the outer cover inside-out. Then slide the outer cover into the inner lining. [27]
    • The two pieces should fit together snugly. Line up all 4 edges around the opening, and make sure the stitched edges of the side panels are aligned.
  13. Pin or clip the top edges of the outer bag and liner. Stitch all around the top edge to attach the liner to the outer cover. [28]
    • Again, use a 1 ⁄ 2  in (1.3 cm) seam allowance.
    • Overlap your beginning and ending stitches to help secure the thread.
  14. With the outer and inner layers now attached, reach into the bag’s opening. Pull up the bottom, and flip all of the material right-side out. [29]
    • The right side of the outer cover should now be visible from the outside. When you peek inside the cooler, you should be able to see the waterproof layer.
  15. Find the ditch, or the line where the waterproof liner meets the outer fabric. Stitch a line directly into the ditch all around the bag’s opening. [30]
    • This last stitch will help stiffen the opening and hold the lining and outer fabric together.
  16. Use fabric adhesive or a hot glue gun to add Velcro, magnets, or snaps to the insides of the bag’s long edge. To close the bag, pinch the sides inward, then seal the Velcro, magnets, or snaps. [31]
    • There you have it! Enjoy your new handmade insulated lunch bag!
    17. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      Simple Cooler

      • Lidded plastic or cardboard box
      • Aluminium foil
      • Craft glue
      • Packaging peanuts, thick fabric, or bubble wrap

      Insulated Box

      • Large cardboard box
      • Trash bag, plastic shower curtain, or plastic tablecloth
      • Scissors or utility knife
      • Duct tape
      • 10 1 in (2.5 cm) thick foam board panels
      • 1 ⁄ 2  in (1.3 cm) thick foam board panel
      • Craft glue
      • Vermiculite or spray foam

      Insulated Lunch Bag

      • 1 yd (0.91 m) thermal batting
      • 1 yd (0.91 m) waterproof liner
      • 1 yd (0.91 m) outer fabric of your choice, such as canvas or denim
      • Scissors or fabric shears
      • Measuring stick
      • Sewing machine
      • Adhesive spray
      • Thread
      • Sewing pins
      • Velcro, magnets, or snaps

      You Might Also Like

      Beat Boredom with These Creative Craft Ideas
      How to
      Make a Rubber Band Star
      How to
      Create a Time Capsule That’ll Withstand the Test of Time
      How to
      Build a Homemade Rube Goldberg Machine
      How to
      Make a Coupon Book for Tasks
      6 Simple Icee Slime Recipes: Blue Raspberry, Cherry, & More
      How to
      Make DIY Fabric Bows without Sewing
      How to
      Build a Nativity Stable
      How to
      Cut Popsicle Sticks
      How to
      Make a Tin or Aluminum Foil Hat
      How to
      Build a Homemade Jack in the Box Toy
      How to
      Make Liquid Starch
      Simple Steps to Clean & Polish Luxury Vinyl Plank Flooring
      How to
      Dye Rubber
      Advertisement

      References

      1. ↑ https://sciencing.com/build-not-melt-4-hours-5994104.html (line the outside...) with https://service.techinfus.com/en/sovetyi/sumka-holodilnik-svoimi-rukami-poshagovyie-master-klassyi.html
      2. ↑ https://pbskids.org/designsquad/build/build-better-lunchbox/
      3. ↑ https://sciencing.com/build-not-melt-4-hours-5994104.html (line the outside...) with https://service.techinfus.com/en/sovetyi/sumka-holodilnik-svoimi-rukami-poshagovyie-master-klassyi.html
      4. ↑ https://sciencing.com/build-not-melt-4-hours-5994104.html (line the outside...) with https://service.techinfus.com/en/sovetyi/sumka-holodilnik-svoimi-rukami-poshagovyie-master-klassyi.html
      5. ↑ https://www.youtube.com/watch?v=VN1ttW3MKnc&feature=youtu.be&t=168
      6. ↑ https://sciencing.com/build-not-melt-4-hours-5994104.html (line the outside...) with https://service.techinfus.com/en/sovetyi/sumka-holodilnik-svoimi-rukami-poshagovyie-master-klassyi.html
      7. ↑ https://sciencing.com/make-own-cooler-science-project-6703910.html
      8. ↑ https://sciencing.com/make-own-cooler-science-project-6703910.html
      9. ↑ https://sciencing.com/make-own-cooler-science-project-6703910.html
      1. ↑ https://sciencing.com/make-own-cooler-science-project-6703910.html
      2. ↑ https://www.youtube.com/watch?v=f_8Xib44ATs&feature=youtu.be&t=262
      3. ↑ https://sciencing.com/make-own-cooler-science-project-6703910.html
      4. ↑ https://sciencing.com/make-own-cooler-science-project-6703910.html
      5. ↑ https://sciencing.com/make-own-cooler-science-project-6703910.html
      6. ↑ http://www.woodworkersjournal.com/project-plan-outdoor-cooler-cart/
      7. ↑ http://thelongthread.com/wp-content/uploads/2010/08/Simple-Lunch-Bag-Pattern.pdf
      8. ↑ http://thelongthread.com/wp-content/uploads/2010/08/Simple-Lunch-Bag-Pattern.pdf
      9. ↑ https://www.youtube.com/watch?v=DNkUsQs5kEo&feature=youtu.be&t=117
      10. ↑ http://thelongthread.com/wp-content/uploads/2010/08/Simple-Lunch-Bag-Pattern.pdf
      11. ↑ http://thelongthread.com/wp-content/uploads/2010/08/Simple-Lunch-Bag-Pattern.pdf
      12. ↑ http://thelongthread.com/wp-content/uploads/2010/08/Simple-Lunch-Bag-Pattern.pdf
      13. ↑ http://thelongthread.com/wp-content/uploads/2010/08/Simple-Lunch-Bag-Pattern.pdf
      14. ↑ http://thelongthread.com/wp-content/uploads/2010/08/Simple-Lunch-Bag-Pattern.pdf
      15. ↑ http://thelongthread.com/wp-content/uploads/2010/08/Simple-Lunch-Bag-Pattern.pdf
      16. ↑ http://thelongthread.com/wp-content/uploads/2010/08/Simple-Lunch-Bag-Pattern.pdf
      17. ↑ http://thelongthread.com/wp-content/uploads/2010/08/Simple-Lunch-Bag-Pattern.pdf
      18. ↑ https://www.youtube.com/watch?v=DNkUsQs5kEo&feature=youtu.be&t=808
      19. ↑ https://www.youtube.com/watch?v=DNkUsQs5kEo&feature=youtu.be&t=925
      20. ↑ https://www.youtube.com/watch?v=DNkUsQs5kEo&feature=youtu.be&t=973
      21. ↑ https://www.youtube.com/watch?v=DNkUsQs5kEo&feature=youtu.be&t=1096
      22. ↑ http://thelongthread.com/wp-content/uploads/2010/08/Simple-Lunch-Bag-Pattern.pdf

      About This Article

      Article Summary X

      To make a cooler from insulating material, start by lining the outside of a cardboard or plastic box with aluminum foil. If you're using a cardboard box, line the inside with foil as well. Then, glue bubble wrap, thick fabric, or packing peanuts to each surface inside the container, including underneath the lid. Finally, place an ice pack and whatever you're storing inside the container. To learn how to sew your own insulated lunch bag, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 236,421 times.

      Reader Success Stories

      • Betsy

        Apr 6, 2022

        "It was good to find such a helpful and informative well set out instructions on so many tips and everyday things ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement