How to Make a Felt Hat

PDF download Download Article
PDF download Download Article

Hat making, also known as millinery, may look intimidating and complex, but it is actually quite simple. If you want to get really professional, you will need to use a hat block and a felt hood. If you are just starting out, or if you want something easier, however, consider making a needle felted hat out of wool roving instead.

Method 1
Method 1 of 2:

Using a Felt Hood

PDF download Download Article
  1. Purchase a wood hat block from a millinery shop or online. Set it down on a stable surface, then cover it with plastic wrap. Secure the plastic wrap to the base of the hat block with a rubber band or tape to keep it from sliding around. The plastic wrap will make it easier to remove the finished hat. [1]
    • It would be a good idea to work in a well-ventilated area. The hat stiffener can smell and make you feel lightheaded.
    • Don't use a Styrofoam hat base. It is not the same thing. You need something more rigid.
    • The shape of the hat block will determine the final shape of your hat, so choose the shape and size wisely!
  2. Purchase a felt hood from a millinery store; it looks a little like a cloche hat. Use a paintbrush to apply felt stiffener to permeate the felt. Use enough felt stiffener to permeate the material, but not so much that it soaks through to the other side. [2]
    • You can also use a wool felt or fur felt sheet. You can find it online or in the needle felting section of a craft store. [3]
    • Do not use the acrylic felt sheet from the kids' crafting section of a craft store. It is not the same thing.
    Advertisement
  3. Pull the felt hood over the hat block, stiffener-side-down, then flip the hat block over so that you can see the underside. Wrap the edges of the felt over the bottom edges of the hat block and secure them with pins. It doesn't matter if they are parallel or perpendicular to the edge. [4]
    • Start with a pin in each of the cardinal directions: North, East, South, and West. Fill the gaps in with more pins until the entire edge is pinned.
    • If you are using a felt sheet, place it stiffener-side-down against the hat block. Pull and stretch it over the hat block, then secure it with pins along the bottom edge. [5]
  4. During this time, you can wipe your brush clean, then wrap it in plastic. Do not use water, or this will cause the stiffener to turn solid. [6]
  5. Drape a tea towel over your hat, then fill your iron with water. Turn the iron on, enable the steam function, and set the heat to "Wool." Stretch the tea towel over the hat as you press the hat with the iron. Work your way around the hat, starting at the crown and finishing at the top of the brim. [7]
    • If your iron doesn't have a wool setting, choose a low or medium-low setting.
    • Always keep the tea towel between the iron and the felt. Don't let it wrinkle under the iron; pull it taut.
    • How long you press the hat will vary. You should press it long enough for it to hold its shape. This should only be 5 to 10 seconds.
  6. You can also use a rubber band for hat making instead, which you can purchase at a millinery supply shop. This will help create that crease between the sides of the hat and the brim. In most cases, the brim will lay right where the hat starts to flare out. [8]
    • It does not matter what the string looks like; you'll take it off later.
    • Not all hats have a brim. For example, a pillbox hat is just the crown. In this case, you can skip this step.
    • You can also stick a bunch of pins next to each other to create a line, but be aware that this will leave an indent.
  7. Keep moving the tea towel around the hat and pressing the hat with an iron. Be sure to iron out any puckering or wrinkling that occurs, especially in the crease and the edge of the brim. [9]
    • If you want to make a cloche hat, take the hat off of the block, then iron the brim on an ironing board. Always keep a tea towel between the felt and the iron.
  8. Remove the pins holding the brim to the underside of the hat block, then remove the string you used to make the brim. Finally, pull the hat off of the hat block. Use scissors to cut the folded-under edge. At this point, you can also trim the brim narrower or give it an asymmetrical shape. [10]
  9. Wrap a piece of millinery wire around the brim, then cut the excess off with wire cutters. Use a blanket stitch to sew millinery wire to the edge of the brim. [11]
    • The color of the thread does not matter because you will be covering the wire up.
    • This will help give the brim more structure. If you don't want this, skip this step and move onto the next.
  10. Cut a length of ribbon long enough to wrap around the brim. Sew the ribbon to the brim with the right side against the top of the brim and the edges matching up. Wrap the ribbon over the edge of the brim to the underside, and sew it down again. [12]
    • You can sew this by hand or on a sewing machine. Use a straight stitch and a thread color that matches the ribbon.
    • Use a ribbon that matches the design of your hat. Satin or grosgrain work well here.
    • If you added wire to the brim, then you need to complete this step in order to hide the wire. If you did not add wire to your brim, you can still do this step for a nicer finish.
  11. If you look inside professionally-made hats, you'll notice a grosgrain ribbon band just inside the sides of the crown. Simply cut a length of ribbon long enough to fit inside the hat, then sew the ends together. Tuck the ring into the hat, then hand-sew the top edge down. [13]
    • The ribbon needs to go right where the sides of the hat start to flare out to create the brim.
    • This will help the hat maintain its shape and prevent the felt from stretching out. It is not the same as the outside hat band.
    • The stitching will be visible at the end. You will have to wrap a hat band around the outside of the hat later.
  12. Here is where you can get as creative as you want. For a more professional finish, sew the decorations on by hand with a needle and thread. If you don't wish to sew, you can try gluing them on with hot glue or fabric glue. [14]
    • For a simple look, wrap a ribbon around the base of the crown, then sew the ends together. Cover the seam with a bow or flower.
    • For a more rustic look, use ornaments made from felt, such as matching felt flowers or felt bows.
    • For a vintage look, add a skinny feather into the hat band.
    13. Advertisement
Method 2
Method 2 of 2:

Using Wool Roving

PDF download Download Article
  1. You can find Styrofoam hat forms online or in millinery shops. You can also make your own by carving a Styrofoam block into shape, or by covering a bolter pillow with sheet foam. As long as the hat form is the same size as your head and the shape you want your hat to be, you are good. [15]
    • When buying a hat form, make sure that it is labeled for felting. If it is too rigid, you won't be able to insert the felting needle into it.
    • Do not use a wooden hat block; it is not the same thing.
    • Don't use plastic wrap; it's not durable enough. Stick with a plastic bag instead. It will make removing the hat easier in the end.
  2. Cover the top of the hat form with a thin layer of wool roving; arrange all of the strips horizontally. For the next layer, arrange all of the strips vertically. [16]
    • Wool roving is simply raw wool that hasn't been spun into yarn yet. You can find it online and in the needle felting section of a craft store.
    • You can use all the same color, or you can use different colors for a unique effect.
  3. To do this, simply press the felting tool against the felt until you feel the needles embed into the hat form. Lift the felting tool out, and press it down again. Keep going until you have all of the wool roving felted into place. [17]
    • A felting tool looks a little like a brush, with a flat base and a bunch of pins sticking out of 1 end. You can find it online or in the needle felting section of a craft store.
    • Be very careful when handling the needle felting tool; the pins are very sharp.
  4. Add crisscrossing horizontal and vertical layers of wool to the sides of the hat form first, including the brim if you have it. Felt them into place with your felting tool, then repeat the process. You want a total of 4 layers of wool roving. [18]
    • Start at the top of the hat (crown) and work your way down the sides and to the brim.
    • A vertical layer counts as 1 layer, and a horizontal layer counts as another.
    • You can do more than 4 layers if you want a thicker hat. Work in even numbered sets, so 6 or 8 layers (maximum).
  5. The wool is embedded into the hat form, so you need to gently pry it away first. Slip your fingers between the bag and the hat form, and gently begin to pry the 2 away from each other. Work your way around the brim, then up the sides and to the top. Once you have the hat off of the hat form, peel the plastic bag away from the felt. [19]
    • Be gentle when removing the plastic bag so that you don't distort the hat.
  6. Take your hat to a sink, and pour hot water all over it, making sure to soak it thoroughly. Add a few pumps of dish soap to the hat as well. [20]
    • Don't concentrate the dish soap all in one area. This will make it easier to distribute it more evenly across your hat.
  7. Don't flatten the hat when you work it; you want to work your way around the hat's circumference rather than squashing it like a sandwich. As you continue to work the hat, the felt will shrink and compress. [21]
    • Felt is very absorbent. If it starts to become too dry, add more water and dish soap.
    • Keep working until your hat is felted to your liking. Some people like to leave the felt thick, spongy, and "wooly," while others like to felt it thin and smooth.
  8. Set a few towels on your work surface, then place the hat on top. Cover it with a few more towels, then press down on the hat firmly. Keep pressing until most of the water is absorbed into the towels. [22]
    • If the hat is too soapy and produces too much foam, rinse it with hot water first.
    • If the towels get soaked, move the hat over to a dryer spot on the towel.
    • Don't wring, twist, or wrap the hat in the towels, or you will ruin the shape.
  9. If the hat is misshapen, mold it back into shape first. Once you have the hat on the mannequin head, leave it alone to dry. This can take several hours. [23]
  10. Because these hats tend to look more rustic, it's best to keep the decorations simple. If you want to keep sewing to a minimum, you can glue the decorations on with hot glue or fabric glue. It would be best if you hand-stitched them on, however. Here are some decorating ideas: [24]
    • Wrap a grosgrain ribbon around the hat, stitch it in place by hand, then cover the seam with a felted bow or flower.
    • Decorate the hat with needle-felted flowers or berries.
    • Cut flowers out of felt, layer them together to make fuller, more colorful flowers, then sew them onto the side of the hat.
    11. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What kind of felt do I use and where can I get it?
    Community Answer
    Use wool felt--not synthetic. You should be able to buy this at any fabric store or even certain Walmart stores that carry fabrics.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 14
  • Question
    Can I use felt blends, or does it have to be 100% wool?
    Community Answer
    I have made several hats (and a pair of shoes!) using this method, all with 100% synthetic felt. It works perfectly for the bowl of the hat--stretches like crazy! However, for the brim, use just a single layer of felt, stiffened with glue or starch or a sewn-in hat wire (ironing two wet, gluey layers together will not work with this felt; I think you need the stretching to get them to bond).
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 6
  • Question
    How long does it take to dry?
    Community Answer
    2 days is the perfect amount of time to let your felt hat dry.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 5
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • You can make your own hat block by using another rigid object, such as an upside-down bowl, as long as it fits your head snugly. [25]
        Thanks
        Helpful 2 Not Helpful 0
      • When covering the hat block with saran wrap, make certain there are no gaps.
        Thanks
        Helpful 0 Not Helpful 0
      • A hat made from a felt hood will have a thinner, smoother finish. A hat made from wool roving will have a thicker, woollier finish.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Using a Felt Hood

      • Paintbrush
      • Felt stiffener
      • Iron
      • Felt hood
      • Hat block
      • Plastic wrap
      • String or old ribbon
      • Drawing pins
      • Needle
      • Thread
      • Millinery wire (optional)
      • Satin or grosgrain ribbon

      Using Wool Roving

      • 4 to 6 ounces (113 to 170 g) wool roving
      • Foam hat form
      • Multiple needle felting tool
      • Plastic bag
      • Hot water
      • Dish soap
      • Towels
      • Mannequin head


      You Might Also Like

      How to
      Make a Peter Pan Hat
      How to
      Make a Santa Hat
      How to
      Start Needle Felting
      How to
      Make Felt Balls
      How to
      Make Finger Puppets
      How to
      Make a Basic Felt Doll
      Advertisement

      References

      1. ↑ https://illustrateher.wordpress.com/2011/09/05/step-by-step-blocking-a-felt-hat/
      2. ↑ https://illustrateher.wordpress.com/2011/09/05/step-by-step-blocking-a-felt-hat/
      3. ↑ https://www.youtube.com/watch?v=AL1pgH1KOv8&feature=youtu.be&t=30s
      4. ↑ https://www.youtube.com/watch?v=Cve3d20i8kk&feature=youtu.be&t=1m
      5. ↑ https://www.youtube.com/watch?v=AL1pgH1KOv8&feature=youtu.be&t=5m25s
      6. ↑ https://illustrateher.wordpress.com/2011/09/05/step-by-step-blocking-a-felt-hat/
      7. ↑ https://illustrateher.wordpress.com/2011/09/05/step-by-step-blocking-a-felt-hat/
      8. ↑ https://illustrateher.wordpress.com/2011/09/05/step-by-step-blocking-a-felt-hat/
      9. ↑ https://illustrateher.wordpress.com/2011/09/05/step-by-step-blocking-a-felt-hat/
      1. ↑ https://www.youtube.com/watch?v=Cve3d20i8kk&feature=youtu.be&t=1m40s
      2. ↑ https://www.youtube.com/watch?v=Cve3d20i8kk&feature=youtu.be&t=3m15s
      3. ↑ https://www.youtube.com/watch?v=Cve3d20i8kk&feature=youtu.be&t=3m40s
      4. ↑ https://thestitchsharer.com/2015/08/17/a-step-by-step-guide-to-making-a-felt-cloche-hat/
      5. ↑ https://illustrateher.wordpress.com/2011/09/05/step-by-step-blocking-a-felt-hat/
      6. ↑ http://www.thefunkyfelter.com/2013/11/how-to-make-felted-hat-tutorial-for.html
      7. ↑ http://www.thefunkyfelter.com/2013/11/how-to-make-felted-hat-tutorial-for.html
      8. ↑ http://www.thefunkyfelter.com/2013/11/how-to-make-felted-hat-tutorial-for.html
      9. ↑ http://www.thefunkyfelter.com/2013/11/how-to-make-felted-hat-tutorial-for.html
      10. ↑ http://www.thefunkyfelter.com/2013/11/how-to-make-felted-hat-tutorial-for.html
      11. ↑ http://www.thefunkyfelter.com/2013/11/how-to-make-felted-hat-tutorial-for.html
      12. ↑ http://www.thefunkyfelter.com/2013/11/how-to-make-felted-hat-tutorial-for.html
      13. ↑ http://www.thefunkyfelter.com/2013/11/how-to-make-felted-hat-tutorial-for.html
      14. ↑ http://www.thefunkyfelter.com/2013/11/how-to-make-felted-hat-tutorial-for.html
      15. ↑ https://illustrateher.wordpress.com/2011/09/05/step-by-step-blocking-a-felt-hat/
      16. ↑ https://illustrateher.wordpress.com/2011/09/05/step-by-step-blocking-a-felt-hat/

      About This Article

      Article Summary X

      To make a hat from a felt hood, place a plastic bag over a wooden hat block. Then, turn your felt hood upside down and use a paintbrush to coat the inside of the hood with felt stiffener. You can get these supplies online or at your local millinery shop. After you've applied the stiffener, place your hood stiffener-side down over your hat block and secure the sides with pins. Let it dry for 30 minutes, and then iron your hat and add the brim. For directions on how to make a felt hat using wool roving, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 264,685 times.

      Reader Success Stories

      • Rose Cronin

        Jan 17, 2017

        "Great instructions! My first attempt turned out fabulous! I made a few adaptations, such as using a coated metal ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement