How to Easily Install a Dimmer Switch on Any Light

PDF download Download Article
PDF download Download Article

Dimmable lights offer the chance to change up the ambiance in a room with just a quick adjustment. If you're interested in making the lights in your home dimmable, the task is super easy to do on your own. Keep reading for a simple DIY guide to installing dimmers in your home. We'll provide everything you need to know, including tips on completing the process safely.

This article is based on an interview with our master electrician, Daniel Stoescu, owner of Home Tech Solutions, LLC. Check out the full interview here.

Method 1
Method 1 of 3:

Choosing a Compatible Dimmer Switch

PDF download Download Article
  1. When picking a compatible dimmer, you have single-pole and 3-way dimmers to choose from. If the switch you're replacing has one switch, go for a single-pole dimmer. If the switch has 2 switches, pick a 3-way dimmer. [1]
    • A single-pole dimmer allows you to dim the lights with one switch (usually a dimming knob).
    • A 3-way dimmer allows you to turn the light on and off with one switch while dimming the light with the other switch or dimming knob.
  2. Dimmable LED , incandescent , and halogen bulbs work best with dimmer switches made for the specific lightbulb type. When choosing a dimmer switch, read the label and name of the switch to make sure that it's compatible with the light bulbs you intend to use. [2]
    • For the dimmer switch to work properly, use a dimmable bulb.
    • Installing an incompatible dimmer might cause the lights to flicker, stay in one lighting range, or not come on at all.
    • Standard dimmer switches are not compatible with ceiling fan lights, as they can weaken the fan motor and cause it to overheat. Call a licensed electrician to install separate switches for the ceiling fan and the light bulb.
    Advertisement
  3. Dimmer switches come with a specific rating that describes the maximum amount of wattage they can accommodate. The standard ratings include 150, 300, 600, and 1,000. If you're trying to dim a single bulb, check that bulb's wattage to determine the type of dimmer you need. For example, a single 100-watt bulb would be compatible with a 150-watt dimmer switch. [3]
    • When you're working with multiple light bulbs, add up the wattage of each bulb. Then, find a dimmer switch with a rating that is compatible with that amount.
    • If you have 4 100-watt bulbs (400 watts in total), then a 300-watt dimmer switch would not be enough. Purchase a dimmer switch with a 600-watt maximum to ensure the switch works properly.
    4. Advertisement
Method 2
Method 2 of 3:

Installing a Single-Pole Dimmer Switch

PDF download Download Article
  1. For your safety, it's important to keep the power turned off during the entire installation process. Find your home's electrical panel, then flip the corresponding switch to turn it off. To ensure that the power is off, turn the light switch on and off to make sure it produces no light. Then, use a voltage tester to ensure there is no electrical current coming from the breaker.
    • Electrical panels are usually located in the garage, basement, laundry room, or closet space of a home or apartment. [4]
    • If you're not sure which breaker switch corresponds to the light switch, turn off each switch one by one and see which one shuts off the light. [5]
    • Purchase a non-contact voltage tester online or at a home improvement store in your area. Apply the non-contact voltage tester to the breaker switch that controls the light switch to make sure there is no electrical current.
  2. Going counter-clockwise, unscrew each screw that holds the wall plate in place. Then, gently lift the plate off the wall and set it aside. Before going forward, apply a non-contact voltage tester to the switch screw terminals. That way, you can be absolutely sure there is no electrical current before removing the light switch. [6]
  3. Before unfastening the light switch, take note of where each wire is connected to the light switch and which color wire attaches where. The dimmer light switch will be attached with the same wire configuration. To detach the light switch, turn the screws with a screwdriver in a counter-clockwise direction. [7]
    • To remember the proper wire configuration, consider labeling the wires with electrical tape or taking a photo.
  4. Use a wire stripper to strip the wires if necessary, and leave 1.5 inches (3.8 cm) of exposed wire for proper installation. [8]
  5. Follow the same corresponding locations that connected the previous light switch to the wall. To wire a single-pole wall switch , connect the hot wire to the copper screw on the new switch by twisting it over the screw in a clockwise direction. If the switch is connected by push connector nuts, push the hot wire into the correct placement. Follow that by securing the neutral wire to the dimmer in the same fashion. [9]
    • The hot wire is usually red or black.
    • The neutral wire is usually white.
    • For an additional reference, see if your dimmer switch came with wiring instructions and refer to those throughout the process.
  6. Connect these two wires by twisting the ends together in a clockwise direction with needle-nose pliers . Then, secure them with a wire connector nut .
  7. Now that you've connected the wires, guide the switch back to its proper placement in the wall and reattach the wall plate. Secure the top and bottom of the wall plate using a screwdriver and screws.
  8. After switching on the breaker, turn the lights on and dim them using the dimming switch or knob. If the lights turn on and dim, then you're good to go! If not, double-check that the correct switch on the breaker is turned on. If the light is still not working, call a licensed electrician to troubleshoot other possible issues.
    • If you intend to make any adjustments to the wiring yourself, always remember to switch the breaker off again first.
    9. Advertisement
Method 3
Method 3 of 3:

Installing a 3-Way Dimmer Switch

PDF download Download Article
  1. Find the breaker in your home (usually in the garage, basement, laundry room, or closet) and shut off the breaker switch that's connected to the light switch. [10] Before you proceed, check that the power is off by flipping the light switch on and off (if the power is off, it will produce no light). Double-check that there is no electrical current by applying a non-contact voltage tester to the breaker switch.
    • Buy a non-contact voltage tester online or at a local home improvement store if you don't have one. To use it, touch the voltage tester to the switch on the circuit breaker.
  2. Turn the screws at the top and bottom of the wall plates in a counter-clockwise direction until they come loose. Then, remove the wall plates and put them to the side. After, apply the non-contact voltage tester to the screw terminals in the switches to ensure that there is no electrical current. [11]
  3. To wire a 3-way light switch , first connect these two wires by twisting the ends together in a clockwise direction. Then, fasten them securely with a wire connector nut . [12]
  4. The common wire is usually black and may be labeled with a tag that says "COMMON." Connect the two wires by twisting the ends together and fastening them with a wire connector nut. [13]
  5. The last wires in each switch are called the traveler wires, and they are usually red and black. Connect the traveler wires to the remaining wires in the wall by twisting the ends together and secure them both with wire connector nuts. [14]
  6. Fasten the wall plates on the top and bottom to make sure the plates are secure.
  7. Flip the corresponding breaker switch to turn the power supply back on. Then, turn on the light and test out the dimmer to make sure it functions properly. If it's not working, check the breaker to make sure that it's turned on. In the case that the light is still not working, call a licensed electrician for help.
    • If you plan on making any changes to the wiring, remember to always turn the breaker off first.
    8. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • To save yourself the hassle of installing a dimmer switch, you can also purchase a SceneSwitch Bulb , which includes 3 different lighting options within the bulb. Or, go for a smart bulb , which can be dimmed through an app on your phone.
        Thanks
        Helpful 0 Not Helpful 0
      • If you buy a dimmer switch, they may come with their own set of wiring instructions for an additional reference.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warning

      • Working with electricity without the help of an electrician can be dangerous. Always turn off the power supply during the installation, and if you have any questions, call a licensed electrician for help.

      Things You'll Need

      You Might Also Like

      Easiest Way to Install LED Strip Lights
      How to
      Test LED Lights
      How to
      Cut Led Strip Lights
      How to
      Make a Homemade Flashlight
      How to
      Daisy Chain Lights
      How to
      Hang Fairy Lights
      How to
      Install a New Light Fixture
      How to
      Wire a Light
      How to
      Install a New Ceiling Light Fixture
      How to
      Install a Pendant Light
      How to
      Connect LED Strip Lights
      How to
      Test Fluorescent Bulbs
      How to
      Replace a Fluorescent Light Cover, Tube, or Fixture
      How to
      Replace a Recessed Bulb (Without Removing the Fixture!)
      Advertisement

      References

      1. ↑ https://www.bobvila.com/articles/how-to-wire-a-light-switch/
      2. ↑ https://www.electrical101.com/dimmer-switches.html
      3. ↑ https://www.bobvila.com/articles/how-to-replace-a-light-switch/
      4. ↑ https://www.bhg.com/home-improvement/electrical/how-to-turn-off-power/
      5. ↑ https://www.bobvila.com/articles/how-to-replace-a-light-switch/
      6. ↑ https://www.bobvila.com/articles/how-to-replace-a-light-switch/
      7. ↑ https://www.bobvila.com/articles/how-to-replace-a-light-switch/
      8. ↑ https://www.bobvila.com/articles/how-to-wire-a-light-switch/
      9. ↑ https://www.bobvila.com/articles/how-to-replace-a-light-switch/
      1. ↑ https://www.bhg.com/home-improvement/electrical/how-to-turn-off-power/
      2. ↑ https://www.bobvila.com/articles/how-to-replace-a-light-switch/
      3. ↑ https://www.electrical101.com/dimmer-switches.html
      4. ↑ https://www.bobvila.com/articles/3-way-switch-wiring/
      5. ↑ https://www.bobvila.com/articles/3-way-switch-wiring/

      About This Article

      Thanks to all authors for creating a page that has been read 28,290 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement