A homemade card is a nice, affordable way to show someone you care. If your basic card feels like it’s missing an extra touch, add some pop up art. Pop up flowers are a perfect addition to greeting cards that will brighten someone’s day. Making them pop up is easily done with some extra paper and glue. Learning this technique should show you a skill applicable to other arts and crafts, enabling you to make pop up art of any shape.

Method 1
Method 1 of 2:

Making a Card With Centerfold Pop Up Art

  1. Start with a card that says all the words you need to. Put your messages where you want them to go, so you know where your center design will go. Make sure nothing you want to be visible will be underneath your centerfold design.
  2. Picture a spot around the centerfold that you want to be covered by flowers. Draw a rough outline around this spot so you know what spots it will cover. It should start at the bottom of the card and extend upwards and outwards, like the shape of an ice cream cone.
    Advertisement
  3. You don't want your centerfold flower to be wider than your card. Fold your card shut and measure the width.The widest part of the pop out flower should not be more than this amount.
  4. The top dimension should be no wider than your card's width (when closed). You can make a centerfold design much smaller than this, however. As long as your design is not wider than the width of the card, folded, you can place it at any height on the centerfold.
  5. This is where you use markers or construction paper to create a design. It is advisable to make it symmetrical, but you don't need to. Keep track of the design you will want to cut out of the top once you have finished drawing the design.
    • After you're done, cut any excess paper from the top and sides.
    • Erase and pencil marks you made to plan for the centerfold design.
    • Fold your design in half.
  6. Lay out your card and your centerfold design. Line up your centerfold design with the crease of your card. Rubber cement will hold your centerfold the best, but standard glue will work as well. It will make your card more secure to fold an inch along edges of the triangle so it doesn't come off the card.
  7. You want to fold the triangle the opposite direction of the way the card folds. In other words, if you open the card, the triangle should pop out toward you. Now glue the flowers on the triangle. If they are going over the center crease of the triangle, fold them as well so they will not get damaged when the card closes.
  8. Once the glue holding on the triangle and flowers have dried, carefully close your card. When it is opened again, the flowers will pop up. The centerfold flower is different from the regular pop out flower.
    Advertisement
Method 2
Method 2 of 2:

Making a Card With Simple Pop Out Flowers

  1. Take any size piece of paper and fold it in half to make your card. Of course, you can make the card as big or small as you want and fold it to open sideways or flip up. Decorate the front and inside of your card however you wish. Add bows or glitter to make it original.
    • When you decorate the inside, plan how many flowers you want, how large you want them, and where you want them.
  2. Once you’ve decorated your card, open it and use a pen to mark with an X where you plan to place your pop up flowers. This will give you a final number of how many you need to make. Once you mark the spots, put your card in a safe place so that you can make your flowers.
  3. Using colorful paper, outline as many flowers as you had X’s on your card. You can make them all the same kind and color or you can vary them. Try cutting out two flowers and gluing them together. Rather than gluing them directly on top of one another, twist one so that the petals from the bottom are seen in between the petals of the other.
    • The size of your flowers and the length of your springs depends on how much wobble you want the flowers to have. Larger flowers will be heavier and flop around more, while smaller flowers will stay in place easier. Make sure you aren't obstructing your text with overly large flowers.
    • The easiest flower to draw will have four to five petals and you can easily draw one by placing a small circular item on your paper (a penny is a good starting point). Next, simply trace a bubbled outline around the circle to make your flower.
  4. Now that you have all of your flowers cut out, you can decorate them. Use glitter, markers, or chalk to add fun to the future pop up flowers for your card. To make them 3D, you can fold the petals to give them some structure. Simply crease the petals down the middle so that the petals stand up.
  5. There are 2 methods for this. For one, cut strips of construction paper three inches long and the width of your flowers. Cut as many strips as you have flowers. Take a strip and fold ½” up. Keep this fold and make a second fold by going the opposite way. This will create a Z shape, with one strip longer than the other. Repeat this back and forth fold all the way up your strip of paper. Notice that it creates a spring. [1]
    • Alternately, you can cut strips an inch or two longer, and fold them like an accordion. This will really make your flowers pop.
  6. If you’ve added glitter, glue, or anything else to your card that needs time to adhere, wait for it to dry before you add your flowers. This way you can move your card freely to place your flowers where you want.
  7. Rubber cement will hold your springs the best, but standard glue will work as well. Place a drop of adhesive on your X and place the bottom fold of your spring on it. Hold it in place for a few seconds. Repeat with all of your X’s and springs.
  8. Now that you’ve glued your springs to your card, place a drop of adhesive to the top flap of a spring. Using both hands, place one of your flowers on this spring. Pinch the top flap of your spring and your flower together to ensure it sticks.
  9. Once the springs and flowers have dried, carefully close your card. When you do so, it will squish the flowers to the card. When it is opened again, the flowers will pop up.
    Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I make a beautiful and easy greeting card?
    Community Answer
    You could just take a strip of paper and fold it like a fan. Then stick in the greeting card. On top of it, paste a picture so that when the recipient opens the card, the picture will pop out.
  • Question
    How do I make simple greeting cards?
    Community Answer
    Fold cardstock in half, decorate front cover, back cover, and inside with markers, crayons, glitter, etc., and write a lovely message inside.
Ask a Question

      Advertisement

      Video

      Tips

      • Do not use a very thin paper, because when we apply glue the paper will tear off because of the tiniest layer of paper. If you have thin paper only, you can stick 2 or 3 papers together to make a hard paper.
      • Don’t use an excessive amount of glue. The card could get glued shut if you do.
      Advertisement

      About this article

      Thanks to all authors for creating a page that has been read 425,676 times.

      Did this article help you?

      Advertisement