Download Article
Make a safe and sturdy rope swing in your backyard using these simple tips
Download Article
A rope swing is a good weekend project that anyone can create. There are certain things you can do to make your rope swing last generation after generation. Everyone will appreciate a comfortable rope swing over a hard to use tire swing. You’re never too old for rope swinging fun!
Steps
-
Gather your supplies. To create a sturdy rope swing you’ll need a 36" 2x8 wooden board. Make sure the wood you use is strong like Oak or Walnut. You’ll also need two seat reinforcements that should be the same type of wood and 4” of 2x8. For a long lasting swing, pressure treat the wood before constructing. You’ll also need the following tools:- Saw
- Drill
- Nails
- Hammer
- Measuring tape
- Pencil or marker
- Lighter or matches
- Two climbing carabiners
-
Cut the wood. Measure 36 inches of 2x8 and mark it. Saw the main seat out of the 2x8 and then measure out two 4” blocks. Saw off your reinforcement blocks. You can also go to the hardware store with your measurements and they’ll cut the dimensions quickly.Advertisement -
Attach the reinforcements. Align the 4” blocks at the two ends of the main seat so that the corners are smooth. Position the wood so the two reinforcements are underneath the seat. Use your hammer to apply two nails on each side. [1] X Research source- If you want to be more secure, you can add more nails to the reinforcements.
-
Drill the holes for the rope. Use a drill to create two ¾” holes on each side. Drill through both the seat and the reinforcements. The holes should be evenly spaced on each side. Use a marker and measuring tape to ensure you create even holes.
Advertisement
-
Acquire a rope. To create a lasting rope swing, you'll need to use a ⅝” braided hollow core polypropylene rope. This is a strong and durable rope used for climbing. You can find this style of rope at an outdoors store if you didn’t see it at the hardware store. The length of the rope depends on the height of the tree limb. For a twenty foot branch, you’ll need 80 feet (24.4 m) of rope.- Make sure you buy braided rope!
-
Keep the rope from unraveling. Cut out two five foot strands of rope and heat each end with a lighter until they begin to melt. Stop heating once they begin to melt. Thread one end through the top and make an overhand knot underneath the seat. Repeat this with the opposite end of the rope into the open hole on that side. [2] X Research source- Do this to both sides of your seat. The result will be two hoops secured onto the seat.
-
Attach a carabiner. Make sure you use a climbing carabiner and attach one to each side of the seat. This will attach the seat to the ropes that are secured to the tree. [3] X Research source
Advertisement
-
Find a tree. Scout your property for a good sized tree and make sure it is sturdy. Look for thick tree branches that extend at least 15 feet from the ground. Make sure the tree is in good health and can take the strain of a rope swing.- You don’t have to use a ladder to tie the knots. [4] X Research source
-
Measure the rope. Once you’ve found a good branch, you need to measure the height from where the swing will hang. You need to leave three feet of slack for knots. Once you’ve measured how long each rope should be, cut two identical strands of rope. [5] X Research source -
Tie a double-bowline knot. This is a common knot for creating a rope swing. Create two small coils close to each other and then layer them on top of each other. Thread the closest edge of the rope through the two coils. Then swing that edge around the rope above the two coils and thread it back through the coils.- Open up the hole underneath the coils and secure the knot that the coils have created. [6] X Research source
- You’ll need to make this knot for each strand of rope.
-
Secure the knot to the tree branch. Toss the knotted edge over the branch you’ve selected. Pass the other end of the string through the hole and tighten it until the knot is in place on the branch. Repeat this process to the other rope.- Adjust your rope into the right position before tightening.
-
Complete the rope swing. Once the two ropes are in the proper place, tie an additional double-bowline knot onto the dangling rope. Once you’ve secured the two holes, attach the two carabiners to the ropes end. You should now have a balanced and sturdy rope swing. [7] X Research source
Advertisement
Community Q&A
Search
-
QuestionHow high should the swing be above the ground?Undertale4141Top AnswererThat depends on where you are hanging your swing, and who will be using it. Anywhere from 6 inches to 2 feet is fine.
-
QuestionI have an angled branch to which I want to attach my swing. How do I keep the swing level?Community AnswerMake one rope shorter than the other rope, until the swing rests even.
-
QuestionI don't have a tree by my house. Is there anywhere else I could hang the swing?Community AnswerIf there are any trees in your local park, you could hang it there.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- Ensure that the tree branch is living and sturdy.Thanks
- Supervise your children if you think they should be supervised while playing on a rope swing.Thanks
Advertisement
References
- ↑ https://www.lowes.com/n/how-to/rope-swing
- ↑ https://www.lowes.com/n/how-to/rope-swing
- ↑ https://www.lowes.com/n/how-to/rope-swing
- ↑ https://www.lowes.com/n/how-to/rope-swing
- ↑ https://www.lowes.com/n/how-to/rope-swing
- ↑ https://www.animatedknots.com/bowlinewater/
- ↑ https://www.lowes.com/n/how-to/rope-swing
About This Article
Article Summary
X
To make a rope swing, first cut 1 long piece of wood for a seat and 2 short pieces for supports, and nail the supports underneath the sides of the seat. Then, drill 2 holes in each end of the seat and thread a 5-foot rope through the holes on each end. Tie knots in the rope under each hole, and attach a carabiner to the top of each rope. Next, use double-bowline knots to secure 2 long pieces of rope around a thick branch of a sturdy tree. After that, tie double-bowline knots to the loose ends of the ropes, then attach the carabiners to hang your seat. To learn how to tie a double-bowline knot to secure your rope swing, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 247,260 times.
Reader Success Stories
- "My son wanted a rope swing in his room, so for his birthday, we put a wooden beam across the ceiling. We told him we were making him a swing. He wanted to help, and he painted the swing a very pretty green. He loves his swing so much." ..." more
Advertisement
"My son wanted a rope swing in his room, so for his birthday, we put a wooden beam across the ceiling. We told him we were making him a swing. He wanted to help, and he painted the swing a very pretty green. He loves his swing so much."
..."
more
