How to Make a Rubber Band Gun

Co-authored by wikiHow Staff

Last Updated: April 10, 2024 Tested

Rubber band weaponry has proven its worth on many school and household battlefields. In particular, the rubber band shooter, also called the rubber band gun, has distinguished itself as a versatile tool. For example, a talented rubber band trick shooter might knock down a paper target or he might stun a stationary fly. And so could you. All it takes to make your own is some creativity, a few household items, and some rubber bands. Before you know it, a trusty rubber band shooter will be as good as yours.

Easiest Way to Make a DIY Rubber Band Gun

Hot glue a clothespin to a pencil with the clip side facing the eraser. Push a thumbtack into the pencil on the side opposite the clothespin. Pull a rubber band so one end catches on the eraser end of the pencil, then pull the other end between the clip of the clothespin. Open the clothespin to fire the rubber band.

Method 1

Method 1 of 6:

Making a Pencil Peashooter

Download Article

1
Grab your pencil peashooter components. This rubber band shooter gets its name from the pencil that forms its stock. The bits and pieces you'll need to make your peashooter are mostly common household items, and include:
- Pencil
- Thumbtack
- Hot glue gun or superglue
- Clothespin
- Rubber band
Using your hot glue or superglue, attach your clothespin so it is lined up with the writing end of your pencil, with the alligator clip side facing the eraser. Allow enough time for the glue to fully dry before continuing.

Advertisement
Take your thumbtack and push it into your pencil on the side opposite your clothespin. The nub of the thumbtack should give you just enough to wrap a finger around to help you grip your pencil peashooter.
Take your rubber band and pull it so that one end catches on the eraser end of your pencil and pull the opposite between the clip end of your clothespin. Aim your weapon and open your clothespin to release and fire your rubber band.

Method 2

Method 2 of 6:

Fashioning a Rubber Band Rifle

Download Article

1
Find a suitable piece of wood for the stock and barrel. The stock and barrel of your rubber band rifle should be made of a material soft enough that you can cut a groove into it. Wood is likely the cheapest and most readily available option, though bamboo and similar materials can also make an effective stock.
- Your stock should be about two feet (60 cm) in length.
- You can find suitable wood for your stock from a sturdy tree branch, a hardware store, or a lumber yard.
- Spare handles for tools, frequently sold at hardware stores, are an excellent option to consider.
2
Collect the rest of your rubber band rifle parts. In addition to your stock and barrel, you'll need a release along with something to attach your rubber band release to your gun. All in all, you'll need:
- Clothespin (for release)
- Pencil
- Glue (wood glue, superglue, etc.)
- Knife
- Rubber band
3
Attach a clothespin to your stock to act as your release. ^{[1]
X
Research source} The best placement for your clothespin depends on the kind of rifle you intend on making. A high powered rubber band rifle can be made by attaching your clothespin farther back on the stock. Normal rifles should have the clothespin attached ⅔ of the way from the front toward the back of your stock. To attach your clothespin:
- Mark your stock with a pencil or knife at the location you plan on attaching your clothespin.
- Use a glue, like wood glue, superglue, or hot glue, to attach your clothespin to your stock.
- Allow sufficient time for your glue to fully dry.
- Note: the farther back you put your clothespin, the more pressure your rubber band will exert on the pin. If you place your pin too far back, your clothespin might not be strong enough to hold your rubber band in place.
^{[2]
X
Research source} Use a knife or a cutting tool, like a small woodworking saw, to cut a notch in the front of your stock where your barrel comes to an end. This will be where you load your rubber band.
5
Arm your rubber band rifle with ammunition. Take a rubber band and put one end of it into the notched part of your stock at the tip of the barrel. Then pull your rubber band back, stretching it all the way to the clothespin. Open your clothespin and:
- Hold your rubber band so that it is behind the teeth of your clothespin.
- Close your clothespin to trap the rubber band on the inside of the clothespin.
6
Test tension and sturdiness. Using your finger, push and pull lightly on your armed rubber band to make sure the notch you have cut is deep enough. Then, inspect your clothespin to ensure it is sturdy enough to withstand the tension of your rubber band.
- If the band slips free easily, you may want to use your cutting tool to cut your notch a little deeper.
- If your clothespin does not seem sturdy enough, you may want to apply some more glue or an additional fastener, like duct tape.
7
Test fire your new rubber band rifle. Aim your rifle by looking down stock, using the clothespin and end of the barrel to sight your target. When, looking down the barrel of your rubber band rifle, you see your target right above both your clothespin and the tip of your barrel, down on the clothespin to release the rubber band.
- At maximum tension, the rubber band should fire about 15 to 20 yards (13.7 to 18.3 m).

Method 3

Method 3 of 6:

Crafting a Realistic Rubber Band Rifle

Download Article

To make yourself a more realistic rifle, you'll need a board about three feet (90 cm) long and six inches (15 cm) wide. You should be able to purchase a board for this purpose from your local hardware store or lumber yard.
2
Get your other rifle making supplies. In addition to the wood that you will form into the main body of your rubber band rifle, you will also need ammunition and supplies to help you cut your wood into the shape of your gun. For this project you should have:
- Pencil/felt tip marker
- Woodworking saw (or a common saw)
- Jig saw (optional)
- Duct tape (or thin leather strip)
- Knife
- Rubber bands
3
Draw the outline of your rifle on your board. Using a pencil or felt tip marker, draw a general outline of a rifle. Feel free to do this freehand, though you may want to use an image from online to model your outline. Generally, your rifle should have:
- A long, thin barrel
- A rectangular sight atop the beginning of the barrel.
- A stock.
- A trigger.
Use a woodworking saw for greater precision, or a common saw if that is unavailable, and cut along the outside of the outline you drew on your board. Do this until the outline is completely cut free.
5
Notch the front of your barrel. ^{[3]
X
Research source} Take a jig saw and make a triangular notch in the front of your wooden gun cutout. The notch should form a wedge pointing inward on the barrel and should be thick enough to accommodate a rubber band.
- In the event you don't have a jig saw, a normal saw or knife should be able to sufficiently notch the front of your barrel.
Take a piece of duct tape or a thin strip of leather folded in half and nail or staple it onto the center of the top of where the stock meets the barrel. You will use this strip like a "trigger," where by pulling the strip free you can fire your rubber band.
Using a saw or knife, cut a notch into the top of your barrel beneath where you have attached your trigger strip. Your notch should be deep and thick enough to serve as a catch for your rubber band.
Tuck your duct tape or leather strip into the notch you have made on the top of your barrel. Now your gun is ready to be armed with a rubber band. Place one end of your rubber band in the notch you have made at the end of your barrel and the other end over your strip and into the notch atop your barrel.
9
Pull your strip free to release your rubber band. Pull backwards on your strip of duct to release your rubber band, causing it to fire down the length of your barrel. Take aim by:
- Look down the barrel of your gun with your dominant (most likely your right) eye.
- Align the top of your barrel where the notch is with the tip of your barrel as closely as you are able.
- Adjust your gun until you see your target directly above both your notch and tip of the barrel.
- Release your rubber band.

Method 4

Method 4 of 6:

Designing a Rubber Band Pistol

Download Article

A regular board, one foot (30 cm) long and six inches (15 cm) wide, should work well for your pistol. Wood in these dimensions can be purchased at most hardware stores or lumber yards.
2
Pull together your pistol production parts. There are some tools you should have on had so that you can fashion the piece of would you found into a really cool rubber band pistol. To make your pistol, you'll need:
- Pencil (or felt tipped marker)
- Saw
- Knife
- Rubber bands
- Nails (thin kind)
- Hammer
With a pencil or felt tipped marker, draw the desired outline of your pistol on your piece of wood. You may want to refer to an online picture of a pistol to serve as a model for your drawing.
Using a normal saw, follow the pistol outline you drew on your board to guide your cutting. Once you cut your pistol free, take some sandpaper and smooth any jagged edges.
^{[4]
X
Research source} Do this by using a hammer to pound a small nail through the part of your clothespin that will lie flat against the barrel of your gun. A second nail can be added to improve the stability of your clothespin.
Use a regular saw or knife to cut a V-shaped notch into the front end of the barrel of your pistol. The resulting notch you make should be deep and wide enough to serve as a catch for your rubber band.
Do this by catching one end of your rubber in the notch you made at the front of the barrel and pulling it into the jaws of the clothespin. While the clothespin is closed, the pistol will be loaded with a rubber band. To fire, open the clothespin and shoot the rubber band.

Method 5

Method 5 of 6:

Smithing the Legendary Rubber Band Machine Gun

Download Article

You'll need a board that is at least one foot (30 cm) long, six inches long (15 cm), and of decent thickness. Thicker wood will result in a sturdier gun. Wood can be bought at most local hardware stores or lumber yards.
2
Accumulate the necessary parts for machine gun making. The wooden board that you now have will eventually turn into the stock and barrel of your rubber band machine gun. But to transform that wood into your legendary rapid-shooter, you'll need:
- Pencil (or felt tipped marker)
- Saw
- Knife
- Rubber bands
- String
- Thumbtack
Use a pencil or felt tip marker and sketch the outline of your machine gun. You may want to look up some images on line to serve as an example for your outline.
Using a normal wood saw, cut along the outline you have drawn on your wood until your machine gun is free from the board. Once it is free, you can take sand paper and rub it against the edges of your wooden gun until it is smooth to the touch.
Cut a notch with your knife that runs down the barrel of your wooden gun, starting where your barrel meets the stock and running along the top side. This will be the track for your pull-release string.
^{[5]
X
Research source} Starting where the stock of your gun meets the barrel, cut as many horizontal notches with your knife as you desire. Leave about one inch (2.5 cm) between your horizontal notches, and make sure your tip to tip notch running along the top of your barrel crosses all of your horizontal notches.
Use a tack to pin your string to the very front of the barrel of your wooden gun. Lay your pull-release string atop the barrel of your gun, guiding it with your fingers so that it lays in the tip to tip track.
Each of the horizontal notches you cut into your barrel will be a catch on which you can string your rubber band. Take one end of your rubber band and catch it on the front of your wooden gun, and pull it back until you can hook it in place onto a horizontal notch.
By pulling on the release string quickly, you'll knock the rubber bands free one after another, creating a rapid fire, machine-gun effect. You might also think of pulling the string slowly to create a more sustained effect.

Method 6

Method 6 of 6:

Creating a Rubber Band Sniper Rifle

Download Article

1
Gather your supplies. Your rubber band special ops sniper rifle is made with only the strongest yardstick or meter stick. A flimsy meter stick might not be able to withstand the tension of your rubber band rounds. You'll need:
- Yardstick/meter stick
- Rubber bands
- Paperclips
Do this by taking two rubber bands and tying both together. To complete your round, you'll need to string a paperclip onto one of the conjoined rubber bands. Repeat this process until you have around 10 rounds of ammunition.
Hold your rubber band round by the paper clip and catch the opposite end on the tip of your meter stick. Then stretch the rubber band along the entire length of your meter stick, holding the meter stick by supporting the underside of it.
Now that your rubber band round is strung tensely along the entire length of your meter stick, letting go of your paper clip will launch the rubber bands. Due to the extreme tension and the attached paper clip, this round should not be aimed at living creatures, as it could do harm.

Community Q&A

Search

Add New Question

Question

Can I shoot at bugs?

Community Answer

Yes, you can.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 68 Helpful 94
Question

Are there more ways to make a rubber band gun?

Community Answer

Yes. There are many more ways to make one. A quick way is to carve a gun shape out of wood, then put a stick through, top to bottom, for the trigger, and a nock on the front of the barrel, to hold the band in place.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 45 Helpful 53
Question

Can I make a rubber band gun that use household items and not wood?

Community Answer

You can replace the wood with cardboard. The "trigger" thumbtack is optional, you can tape/glue cardboard on instead.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 23 Helpful 60

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Don't aim at living things, you could do harm or cause injury. Shoot at targets only.

Thanks
Helpful 1 Not Helpful 2
Doing this may get you into trouble at school. Do not attempt to fire a rubber band gun at school.

Thanks
Helpful 2 Not Helpful 2

Things You'll Need

Fashioning a Rubber Band Rifle

Wood (two feet long (60 cm))
Clothespin (for release)
Pencil
Glue (wood glue, superglue, etc.)
Knife
Rubber band

Crafting a Realistic Rubber Band Rifle

Wood (three feet (90 cm) by six inches (15 cm))
Pencil/felt tip marker
Woodworking saw (or a common saw)
Jig saw (optional)
Duct tape (or thin leather strip)
Knife
Rubber bands

Making a Pencil Peashooter

Pencil
Thumbtack
Hot glue gun or superglue
Clothespin
Rubber band

Rubber Band Pistol

Wood (one foot (30 cm) by six inches (15 cm))
Pencil (or felt tipped marker)
Saw
Knife
Rubber bands
Nails (thin kind)
Hammer

Smithing the Legendary Rubber Band Machine Gun

Wood (one foot (30 cm) by six inches (15 cm))
Pencil (or felt tipped marker)
Saw
Knife
Rubber bands
String
Thumbtack

Creating a Rubber Band Sniper Rifle

Yardstick/meter stick
Rubber bands
Paperclips

You Might Also Like

[1]

[2]

[3]

[4]

[5]

Log in

How to Make a Rubber Band Gun

Easiest Way to Make a DIY Rubber Band Gun

Steps

Making a Pencil Peashooter

Fashioning a Rubber Band Rifle

Crafting a Realistic Rubber Band Rifle

Designing a Rubber Band Pistol

Smithing the Legendary Rubber Band Machine Gun

Creating a Rubber Band Sniper Rifle

Community Q&A

Tips

Warnings

Things You'll Need

Fashioning a Rubber Band Rifle

Crafting a Realistic Rubber Band Rifle

Making a Pencil Peashooter

Rubber Band Pistol

Smithing the Legendary Rubber Band Machine Gun

Creating a Rubber Band Sniper Rifle

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories