How to Make a Sofa Slipcover

PDF download Download Article
PDF download Download Article

A sofa slipcover can give new life to an older piece of furniture, as well as provide a room with a fresh appearance. While it is possible to buy slipcovers, making your own is more cost-effective and offers the benefit of using fabric that is exactly the color and texture desired. Best of all, it is possible to make a sofa slipcover using just a few basic resources and a couple hours of your time.

Part 1
Part 1 of 3:

Preparing the Slipcover Material

PDF download Download Article
  1. The following are general guidelines for fabrics in solid colors; patterns may need more in order to match the different pieces up. Note that fabric is sold by the yard, which is the measurement lengthwise. Bolts of fabric at the craft store have predetermined width, which you'll need to verify before purchasing. Typical widths range from 32 to 60 inches (81 to 152 cm), with 45 and 60 inches (114 and 152 cm) being the most common. The following measurements are based on fabric that is 54 inches (137 cm) wide.
    • For a two-cushion sofa, use 16 yards (16 m)
    • For a three-cushion sofa, use 18 yards (18 m)
    • For a six-cushion sofa, use 22 yards (22 m)
    • For a two-cushion love seat, use 13 yards (13 m)
    • For a four-cushion love seat, use 17 yards (17 m) [1]
  2. You can purchase it at a fabric store or online.
    • Consider a fabric in a solid color. Matching patterns or stripes across large panels can be tricky, so unless you're ready to put in this extra effort, look for a cover material that's a single tone.
    • Opt for a fabric with a lot of drape – this will be much easier to work with. [2]
    Advertisement
  3. This softens the material and also accounts for any shrinkage that may occur. Don't skip this important step: the beauty of a slipcover is that it can be easily removed and washed, but you need to make sure it won't shrink after you've made it. [3]
    • Be sure to follow care instructions for the particular fabric you're working with.
  4. Wrinkles could cause puckering in the finished product, so this ensures a smooth and accurate fit.
    5. Advertisement
Part 2
Part 2 of 3:

Creating the Slipcover Pattern

PDF download Download Article
  1. This mock cover should conform to the sofa's general shape. Since you're creating the pattern at this point, you can decide whether you want a close-fitting slipcover, or one that drapes more loosely.
    • Note that it's okay if you need to use two or three large, separate pieces. In that case, you may need to secure sections to the sofa with safety pins. [4]
    • The arm fronts don't need to be covered at this stage; see Step 3 for more details.
    • If you're feeling confident, you can skip the mock-up and drape the sofa with the material you're going to use, wrong-side up (that is, the color or pattern should be facing down). In this case, you can trace the pattern onto the fabric itself with chalk.
  2. Use chalk to identify where to cut out the pattern (with the exception of the arm fronts, which you'll do in Step 3). You should have a few different sections:
    • the outside back of the sofa
    • the seating area (including the backrest and front section that drops to the floor)
    • the sides of the slipcover, which start on the outside and come up and over the inside of the armrests
  3. These are the two vertical sections on either side of the front of the sofa. It's easiest to create the pattern for them separately. Note that you need only make one pattern, which you can use to create both pieces. [5]
    • Cut out one rectangular piece of paper or muslin, roughly the size of the arm front.
    • Use pins to hold it to one of the arm fronts.
    • Trace with chalk along the outline of the arm front.
    • You'll use this piece for both armrests
  4. Use the scissors to cut carefully along the chalk outlines you've made.
    5. Advertisement
Part 3
Part 3 of 3:

Sewing the Slipcover

PDF download Download Article
  1. Place large sections of the slipcover fabric on a flat surface, then cover with each of the pattern sections. Mark the dimensions on the fabric with the chalk and cut out each section, allowing about 1 inch (2.5 cm) seam allowance for hemming.
    • Seam allowance is a bit of extra fabric you leave so that you can sew the pieces of fabric together.
    • If your arm fronts are asymmetrical, be sure to flip the pattern over before tracing the second one.
  2. Lay the pieces of the fabric on the sofa, wrong-side out (i.e., pattern or colored side facing in to sofa). Use straight pins to assemble the sections of the cover, taking care to affix the pins just on the inside of the chalk lines. This will create the general shape for the slipcover.
  3. Remove these sections from the sofa (you'll need to unpin them from the other sections, but don't touch the pins connecting the arm fronts). Use a sewing machine to stitch the sections together, using the chalk line as the "road" for the stitching.
    • Remember to place the fabric into the sewing machine wrong-side up, so that your seams end up smooth on the right side.
    • Remove the pins once you've sewn the pieces together.
  4. Remove the other two pieces (the back and seating area) from the sofa, taking care not to lose the pins. Use a sewing machine to join these two pieces together.
    • Remove the pins once you're done.
  5. Make sure the cover fits snugly and falls evenly. Add pins to join the sides and body once again.
  6. Use the pins and chalk lines to guide you.
    • Remove the pins from the seams as you go.
  7. Place the cover back on the sofa, wrong-side out. Make sure the seams are straight and the cover fits smoothly across the surfaces.
    • If there are any spots that need fixing, now is the time. Remove problem seams with a seam ripper and rework them so that they are straight.
  8. Remove the slipcover from the sofa and spread it out on a large work surface. Use chalk to trace a hemline along the bottom, about 1/2-1 inch (1.25-2.5 cm) from the edge. Use a tape measure to make sure your line is straight.
  9. Fold along the hemline (wrong side to wrong side) and secure the fabric with pins.
  10. This step helps ensure a clean, straight hemline, and makes sewing easier.
  11. Use the sewing machine to make the hem. Pause from time to time to make sure the stitches are even and holding properly.
  12. Turn the slipcover so the right side is facing out and place it on the sofa, carefully tucking the cover into place.
    13. Advertisement

Community Q&A

Search
Add New Question
  • Question
    I am making a slipcover for a sofa. Do I use the fabric going length-wise, or do I piece it together width-wise to get necessary width?
    Community Answer
    The fabric runs from sofa top to bottom, so you have to piece it to get the width you want. If your fabric is patterned, you will need extra length to match the pattern across so the design covers the sofa uninterrupted.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 5
  • Question
    If my pillows are sewn in the back, should I remove them and cover separately, or should I cover over them?
    Community Answer
    Some sofas may have been upholstered with cushions attached to the back, and sometimes the upholstery fabric may not have been used behind the cushions. However, if you want a fitted slipcover, it's best to remove the back sofa cushions and cover separately.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 3
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Railroad the fabric in order to avoid problematic seam placement. "Railroading" means you'll place the fabric with the grain running horizontally along the length of the sofa, with the selvage seams running along the floor. [6]
        Thanks
        Helpful 3 Not Helpful 0
      • Keep the pattern in a safe place: this will save time if and when you want to sew a new sofa slipcover.
        Thanks
        Helpful 1 Not Helpful 0
      • Using a thin PVC pipe cut to the length of the seating area will help anchor the slipcover and minimize slippage. After positioning the cover on the sofa (tucking behind the seat cushions), slide the pipe horizontally into the space between the back and the seat for a firmer grip.
        Thanks
        Helpful 1 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Slipcover Pattern (in muslin or butcher paper)
      • Fabric for Slipcover
      • Scissors
      • Straight Pins
      • Chalk
      • Sewing Machine
      • Measuring Tape

      You Might Also Like

      How to
      Clean a Leather Sofa
      How to
      Dismantle a Recliner Sofa
      How to
      Separate a Sectional Sofa
      How to
      Restore a Leather Sofa: Fix Tears and Rips
      How to
      Fix a Sagging Couch Yourself.
      How to
      Renew a Leather Couch: Restore Color & Revive Your Aging Leather
      How to
      Drape a Throw over a Sofa
      How to
      Clean a Sofa
      How to
      Repair a Faux Leather Sofa
      How to
      Remove Odors from a Couch
      How to
      Keep Couch Cushions from Sliding
      How to
      Open a Sofa Bed
      How to
      Clean a Papasan Cushion
      How to
      Clean a Chenille Sofa
      Advertisement

      References

      1. ↑ https://www.fabric.com/SitePages/SlipCovers.aspx
      2. ↑ http://www.dummies.com/how-to/content/tips-for-making-slipcovers.html
      3. ↑ http://www.thenester.com/2010/03/how-to-make-slipcovers.html
      4. ↑ http://www.honeybearlane.com/2011/06/how-to-make-a-couch-slipcover-part-1.html
      5. ↑ http://www.honeybearlane.com/2011/06/how-to-make-a-couch-slipcover-part-1.html
      6. ↑ http://www.dummies.com/how-to/content/tips-for-making-slipcovers.html

      About This Article

      Article Summary X

      To make a sofa slip cover, start by buying 16 yards of the material of your choice for a 2-cushion sofa, or 18 yards for a 3-cushion sofa. Then, measure the dimensions of your sofa and draw them onto the material using chalk. Next, take a pair of scissors and cut out the pieces of your cover, including any patterns. Once you've cut the pieces out, pin them together in the shape you want the cover to be sewn in. Sew the side sections to the arms of the sofa before sewing the back and seating area together. Finally, put the body part of the cover on the sofa and sew it to the arms. For tips on how to make a pattern for your slip cover, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 339,711 times.

      Reader Success Stories

      • Rita Gonzalez

        Jun 27, 2016

        "Thanks for making this. I was looking for a couple of years for some couch covers, the ones I found cost too much. ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement