Download Article
Download Article
A star is a super shape for a piñata. It hangs well, is easy to fill with candies and best yet, is a fairly simply design to put together.
Steps
-
Draw a large star shape on cardboard. This will form the template for shaping the wire. It should be at least 30cm x 30cm/12 inch x 12 inch or even higher, to be large enough to hold contents and be hit by the piñata stick.- Cereal and grocery boxes are really good for this. The look of the cardboard doesn't matter as it will be covered.
-
Cut out wide strips of cardboard. These should be the same width. They will form the sides of the star.Advertisement -
Attach the wide strips around the star shape. The wide strips should stand upright. Use tape to attach to the star base. -
Continue all the way around the star until the whole star now has a three dimensional shape.
- Tape all joins of the strips together firmly.
Advertisement
-
Lay the star on a wide piece of newspaper. This will cover the star shortly. -
Add goodies inside the star. These are usually small candies and toys. Candies must be wrapped, for hygiene reasons.
-
Cut sits in the newspaper where the star dents occur. Then bring the newspaper up around the sides of the star and tape closed over the open edge of the star. Repeat with another piece of newspaper to ensure it is strong.
Advertisement
-
Cut 7.5cm/3 inch wide strips from tissue paper or foil. Use one color or vary the colors, as preferred. -
Cut fringes from tissue paper or foil/metallic paper. Fold over the strips, then cut lots of slits, leaving space between the slit and the fold. Continue all the way along each strip.
-
Glue the paper or foil fringe to the star.
- Glue from outside inward. Glue the fringe all the way around the outside of the star first.
- Move inward, gluing each new fringe layer over the top of the last.
- For more interest, consider changing the color of the paper or foil for the inner layers.
-
Leave the center of the star free of fringe. Cut out a smaller cardboard star. Cover it with paper or foil in a matching or different color. Glue to the center.
- Add the name of the party person if wished.
- Decorate with stickers for something additional (optional).
-
Add fringe to the side of the star next. Move methodically around the star, gluing in place and lifting up the fringe as you glue, to ensure it looks it best.- Continue adding fringe until you can no longer see the newspaper.
Advertisement
Community Q&A
Search
-
QuestionDo I have to cut the newspaper before I wrap it around the pinata?Community AnswerYes, look at Step 3 in Part 2. The article shows where to cut it.
-
QuestionWhat can I use if I don't have a pinata stick?Community AnswerYou can use a baseball bat or a regular stick.
-
QuestionCan I use other things to hang up a pinata?Community AnswerYes. You can add some holes in the pinata itself to string it up later with ribbon or rope. You could also use some kind of hook to attach and hang it up.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Reader Videos
Tips
- Other paper can be used to cover the piñata, such as magazine pages or scrap paper.Thanks
- A bungee cord makes for a good, strong hanging cord to attach the piñata to.Thanks
- Always hang the piñata in an area where there is plenty of swing space and there is nothing fragile that could be broken if accidentally hit.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Cardboard
- Marker and ruler
- Scissors
- Newspaper
- Filling goodies (wrapped candies and toys)
- Tape
- Tissue paper or foil/metallic foil (colors of choice)
- Glue stick
- Stickers for additional decoration (optional)
- Piñata stick
About This Article
Thanks to all authors for creating a page that has been read 70,242 times.
Advertisement
84%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"How thick cardboard should be."
