Download Article
Low-cost and low-effort crafts for a lower stress level
Download Article
Stress balls are easy to make from easily available materials. All you need is a few balloons and the right material to put in them. If you want your stress ball to feel more similar to a commercial stress ball, the sewing method may give you the results you're looking for.
Steps
-
Gather an uninflated balloon. Don't use water balloons, which are too thin and weak for this purpose, and will easily burst. [1] X Research source -
Choose a filling. For a typical palm-sized stress ball, you'll need approximately 160 to 240 grams (5.6 to 8.5 oz) of filling. Any of these will do:- For a firm stress ball, use flour, baking soda, [2] X Research source or cornstarch (a white powder called cornflour in the Commonwealth).
- For a looser stress ball, use dry rice lentils, small beans, or split peas, or fine play sand from a hardware store.
- Mix a small amount of dried rice into flour for something in between. This is also more durable than flour alone.
Advertisement -
Blow up the balloon slightly (optional). This isn't always necessary but can be useful if the balloon isn't elastic enough to fit the filling. Blow it up to about 3 to 5 inches (7.6 to 12.7 cm) across, then pinch the neck shut without tying it.- This is easiest to do with a clip or assistant to hold it closed.
- This can make the filling process messier if the air escapes while you're filling it.
-
Stick a funnel into the neck. If you do not have a funnel, spoon the filling into a plastic bottle instead, and fit the balloon over the neck. A plastic cup pinched to form a spout will work too, but tends to make a mess. [3] X Research source
-
Fill the balloon slowly. For a typical palm-sized ball, you'll want to fill the balloon approximately 2 to 3 inches (5.1 to 7.6 cm) deep. Pour slowly to avoid clogging the neck of the balloon.
- If it clogs, use a pencil or spoon handle to clear the opening.
-
Pinch out excess air and tie closed. Remove the balloon from the funnel and let out as much air as you can. Tie the neck of the balloon closed tightly.
- To release the air, pinch near the neck and separate your finger and thumb slightly. Too wide an opening can blow flour everywhere. [4] X Research source
-
Snip off the excess rubber. Use a sharp pair of scissors to cut off the dangling end of the balloon. Don't try to cut too close to the knot, or it could come undone.
Advertisement
-
Wrap a small rubber ball in memory foam. You can find the rubber ball from children's toy stores, and memory foam at some fabric stores or specialized online stores. [5] X Research source You'll want a piece of memory foam roughly 3.5 x 5 inches (9 x 12.5 cm) in size, and anywhere from 1 to 3 inches (2.5–7.5 cm) thick. A thicker piece of memory foam will make a softer, more squeezable stress ball.
-
Sew the foam around the rubber ball. Wrap the foam around the rubber ball and sew the memory foam together with needle and thread to enclose the ball completely. Snip off excess memory foam if necessary to make a rough spherical shape.
-
Finish by sewing a sock or piece of thick fabric around the memory foam. An old sock will provide a durable outer covering, but you can use a thick piece of fabric instead. Snip the sock or fabric to make it a tight sphere around the memory foam. Your squeeze ball is now complete.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Things you'll need
Balloon method:
- One balloon (not a water balloon)
- 160 to 240 grams (5.6 to 8.5 oz) flour, baking soda, cornstarch, fine play sand, dried rice, lentils, beans, or split peas
- Funnel or plastic bottle
Sewing method:
- Needle and thread
- Sock
- Memory foam
- Small rubber ball
Reader Videos
Submit a Video Tip!
Share a quick video tip and help bring articles to life with your friendly advice. Your insights could make a real difference and help millions of people!
Submit a Video
Coming Soon!
Tips
- Using kinetic sand will make it more squishy and fun to play with!Thanks
- Put a hair net over the stress ball. This will create a really cool effect when you squeeze it!Thanks
- Put slime in the stress ball to make it squishier.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- Use a different and darker-colored filling so that your stress ball will change color when squeezed. For example, you could put a blue filling inside a yellow balloon.
- It's a good idea to use two or three balloons. Then if your ball pops or one of the balloons gets a hole, you won't make a big mess.
- I recommend using Play-Doh or kinetic sand for the filling!
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Fillings with water or salt can weaken the balloon rubber and wear out the stress ball more quickly.Thanks
- Wrapping multiple balloons around your stress balloon will add more friction, making it more likely to break.Thanks
Advertisement
References
- ↑ https://www.youtube.com/watch?v=Fz5iEBdJM84/
- ↑ https://www.weareteachers.com/stress-balls/
- ↑ https://patch.com/us/dealtown/buy-or-diy-how-make-squishy-stress-ball
- ↑ https://www.oola.com/life-at-home/2454431/how-to-make-an-extra-squishy-diy-stress-ball/
- ↑ https://www.youtube.com/watch?v=_KvQ_KAW7C8
About This Article
Article Summary
X
To make a stress ball, slip a funnel into the neck of a sturdy balloon. If you want to make a firm stress ball, pour flour, baking soda, or cornstarch into the balloon. If you want your stress ball to be softer, use lentils, split peas, or fine play sand. You can also mix a little rice into your filling if you like. Slowly pour your filling into the funnel, and use a pencil to clear the funnel if it gets clogged. Pinch out any excess air and tie the balloon closed, then snip off any excess rubber from the end of the balloon. To learn more from our Medical Expert co-author, like how to sew a stress ball together, keep reading the article!
Did this summary help you?
Thanks to all authors for creating a page that has been read 593,292 times.
Reader Success Stories
- "Stress balls are great! This article really helped me because everything was written so clearly and it was easy to follow. I like that the article stated the different ways you can make a stress ball. I filled mine with kinetic sand and it was awesome!" ..." more
Advertisement
"Stress balls are great! This article really helped me because everything was written so clearly and it was easy to follow. I like that the article stated the different ways you can make a stress ball. I filled mine with kinetic sand and it was awesome!"
..."
more
"I was making stress balls to sell for a craft fair, and I was looking around for any other methods besides flour, rice, etc. I saw in the Q/A section that you could use slime instead of the usual filling. The slime really improved my balloons! Thanks!"
..."
more
"I tried the stress balloon one and filled it with slime. It worked awesomely! I gave each one to my friends and they loved it as well. I do recommend putting 3 balloons inside each other so it will be more durable and squeezable."
..."
more
"Everyone sharing their stories and experiences and thoughts really helps. I suffer from a lot of things, and this is the first real inspirational website that is going to help me. I have faith."
..."
more
"I found it useful that there were two methods included. This meant that as I did not have the correct materials for the second method, I could use (and was able to) use the first way."
..."
more
