How to Make a Tight Turn Quickly in a Car

PDF download Download Article
PDF download Download Article

Making a tight turn while driving slowly is one thing, but what if you’re moving at a high speed? This article will teach you how to quickly make a tight turn in a car as safely as possible. We’ve included tips for both automatic cars and manual cars, plus we’ll show you how to use your handbrake to make a sharp turn in a wide-open area.

Method 1
Method 1 of 3:

Going Into a Tight Turn

PDF download Download Article
  1. Before you shift lanes or start to turn, you want to make sure that there’s no one behind you or on the side of you. Check to each side of you and look into your rearview mirrors to make sure that you won’t be crashing into other cars when you turn. [1] When you see that you’re all clear, you can start to take the tight turn. [2]
    • Don’t drive fast if you’re in heavy traffic or you may cause an accident.
  2. If you are coming to a tight right turn, position your car to as far left as you can go. If you’re making a tight left turn, you’ll want to shift your car to the right. Getting to the outermost point of the road before taking the turn will allow you to take the turn at the widest possible arc.
    Advertisement
  3. If you are driving a manual car , downshift as you approach the tight turn. You want to enter the turn at a slow speed and exit the turn at a high acceleration. Keep slowing your car down until you feel like you have full control over it. [3]
    • If you enter a tight turn too quickly you won’t have full control over your vehicle.
  4. A wide turn will give you more control over the car and won’t reduce your speed as much as a sharp turn. Look at the road in front of you and visualize taking the turn in the widest possible arc. Even if the turn is a tight one, you should try to take it with the widest arc so you don't lose momentum as you're turning.
    5. Advertisement
Method 2
Method 2 of 3:

Making a Tight Turn

PDF download Download Article
  1. The apex is in the center of the inside corner of a turn. In order to make the widest turn, you’ll want to aim your car so that it drives next to the apex as you're turning. Drive on the outside of the road or track and look at the inside corner of the turn. Plan to drive your car right along side the apex. [4]
  2. As you start coming up to the corner, start turning your steering wheel in the direction that you want to turn. To drive quickly through the turn, you’ll want to turn your steering wheel as little as possible. [5]
    • Do not jerk the steering wheel or you may spin out.
  3. As you stabilize the car around the apex of the turn, you can apply gas to the car. As long as you didn’t enter the turn too quickly, you should have slowed up enough so that you can now apply the gas through the rest of the turn. As you hit the gas your tires should feel gripped against the road and you should feel like you have full control over the steering wheel. [6]
    • If you're in a manual transmission you'll have to upshift as you get faster.
    • If you lose control through the turn take your foot off the gas pedal and lightly tap the brake until you regain control of your car.
  4. Aiming for the inside of the road as you come out of the turn will make the turn too tight and you’ll lose a lot of speed. Instead, look at the outermost point of the track or road and be ready to drive next to it once you come out of the turn.
    5. Advertisement
Method 3
Method 3 of 3:

Using Your Handbrake

PDF download Download Article
  1. When you use your handbrake to turn you'll have very little control over how your car turns. This can cause the back of your car to skid out wildly and you can easily go into an embankment or guardrail. Practice this turn in a wide open space until you know what you’re doing. [7]
  2. To use the handbrake to turn, you’ll need to enter the turn at at least 30 miles per hour (48 km/h). Otherwise, when you pull the handbrake, your car will simply come to a screeching halt. [8]
    • Handbrake turning is easier over a low friction surface like snow, grass, or dirt.
  3. Take your foot completely off the gas while you lift your handbrake. Your hand brake and clutch should only be engaged for 1-2 seconds as you are making the turn. If you have an automatic car, you don’t have to worry about the clutch. [9]
  4. Because you’re engaging the handbrake, you’ll feel a lot of resistance on your steering wheel in the other direction. Quickly turn your wheel slightly in one direction until your back wheels start to skid out. [10]
    • Your tires will start to smoke because of the friction created between the tires and the ground.
  5. If you’re using a manual transmission, hit the clutch as you drop the handbrake. If you're in an automatic, you can just push down the handbrake. When your back wheels start skidding, counter steer, or let the wheel spin in the other direction so that you don't overshoot the turn. [11]
    • If you don’t properly counter turn as your wheels skid, you can spin out or potentially flip your car over.
  6. When you’ve turned enough, you can turn back into the direction of the turn to regain control over your car. Straighten out your car and drive straight. If done correctly, you can make a 180° turn in the matter of seconds. [12]
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What about changing gears while taking a turn?
    Community Answer
    It is best to shift gears before going into a turn or right after, depending on whether you're slowing down or accelerating.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 9
  • Question
    How can I avoid jerking the car after downshifting to 2nd gear?
    Community Answer
    To shift smoothly, you must keep the RPMs above 1000 before releasing the clutch fully.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Do a Burnout
      How to
      Drive a Car
      Driving an Automatic Car: Your Full Step-by-Step Tutorial
      How to
      Reverse Into a Parking Space Like a Pro
      How to
      Adjust Seating to the Proper Position While Driving
      How to
      Start a Car
      Learn How to Drive (for Beginners)
      How to
      Steer Your Car
      How to
      Adjust Car Mirrors
      How to
      Properly Use Your Turn Signals on the Road
      How to
      Stop at a STOP Sign
      How to
      Drive a Car in Reverse Gear
      How to
      Park on a Hill
      How to
      Drive Uphill
      Advertisement

      References

      1. ↑ Ibrahim Onerli. Driving Instructor. Expert Interview. 18 November 2019.
      2. ↑ https://www.howacarworks.com/advanced-driving/bends-and-corners
      3. ↑ https://www.youtube.com/watch?v=4iKtRH9WBZ4&feature=youtu.be&t=24s
      4. ↑ http://www.drivingfast.net/racing-line/
      5. ↑ https://www.howacarworks.com/advanced-driving/bends-and-corners
      6. ↑ http://www.drivingfast.net/racing-line/
      7. ↑ http://www.frankcoles.com/how-to-drive-a-tank/handbrake-turns-and-other-naughty-driving-skills/
      8. ↑ http://www.drivingfast.net/handbrake-turn/
      9. ↑ http://www.drivingfast.net/handbrake-turn/
      1. ↑ https://www.youtube.com/watch?v=XI29zrUBx4Q&feature=youtu.be&t=51s
      2. ↑ https://www.youtube.com/watch?v=XI29zrUBx4Q&feature=youtu.be&t=51s
      3. ↑ http://www.frankcoles.com/how-to-drive-a-tank/handbrake-turns-and-other-naughty-driving-skills/

      About This Article

      Article Summary X

      The safest way to make a quick, tight turn is to make the widest possible arc with your car. First, shift safely to the outer edge of the road and tap the brakes as you approach the turn. Steer smoothly towards the center of the curve. Speed up as you hit the apex of the turn and straighten out by aiming for the outside edge of the road. For tips on using your handbrake to make a fast turn and regaining control if you spin out, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 452,997 times.

      Reader Success Stories

      • Narayanan Ravindran

        Jun 23, 2016

        "I am of 67 years, and learned driving about 4 years back. In fact, I was confused as to how to correctly turn my ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement