How to Make a Tripwire

Reviewed by Barry Zakar

Last Updated: March 16, 2023 References

A tripwire is a mechanical or electrical device. Generally, it's used in weaponry. Soldiers use them in war to cause an enemy to fall, and sometimes, to trip a mine. However, they can also be used for less nefarious purposes. For instance, you can use a tripwire as a perimeter alarm for a campground or as a simple prank.

Method 1

Method 1 of 3:

Creating a Tripwire Bang Alarm

Download Article

You'll need fishing line, a mouse trap, ring caps, tent pegs, nails, screws, and rubber bands. ^{[1]
X
Research source}
Use a drill to screw through the mousetrap onto the top half of the tent peg. Use a screwdriver and wood screws to screw them together. ^{[2]
X
Research source}

Advertisement
The bait pedal is the metal rectangle part that the mouse steps on to release the trap. Drill a hole behind it through the mouse trap. You'll tie a knot over the bait pedal later. ^{[3]
X
Research source}
4
Cut out the pop caps. If your pop caps are in a ring, cut out individual ones. ^{[4]
X
Research source} One should fit over a small nail head. ^{[5]
X
Research source}
- Instead of pop caps, you can use a glow stick. ^{[6]
  X
  Research source}
You need to see where it's hitting the wood when it releases. ^{[7]
X
Research source}
6
Hammer in two nails. Where the bow hits the wood along the sides, drill a small hole on each side. Hammer a nail in each hole. The head of the nail should face the bow as it swings down. In other words, the bow should come down and hit the nail on the head when the trap releases. ^{[8]
X
Research source}
- If you're using a glow stick, drill four holes. Tie the glow stick on so that the bow hits it when the trap releases. ^{[9]
  X
  Research source}
7
Paint the tent pegs and the mouse trap. If you want to camouflage your trap, paint the mousetrap and the pegs to match the surroundings. ^{[10]
X
Research source}
- You can also paint the tent pegs before you attach the mousetrap.
Securely tie the line to the other tent peg. Hammer the peg into the ground. ^{[11]
X
Research source}
Make sure the wire is taut across the path. Run it into the back of the trap to the front, and tie it to the bait pedal. ^{[12]
X
Research source}
Rubber band the tripwire onto the peg and the mousetrap. The rubber band will secure the tripwire. ^{[13]
X
Research source}
Add a pop cap to each nail head. Pull the bow down to arm the trap. ^{[14]
X
Research source}
12
Leave it to secure your campground or area. When the tripwire is triggered, the mousetrap will hit the pop caps, making a loud bang. It will tell if a person is walking in the area. ^{[15]
X
Research source}
- If you used a glow stick, the glow stick will light up when hit. ^{[16]
  X
  Research source}

Method 2

Method 2 of 3:

Making a Tripwire Out of a Water Bottle

Download Article

a sturdy water bottle. A standard 20 or 24 ounce bottle is fine for this purpose.
Mark the middle of the bottle. Use a hacksaw or scissors to cut the bottle in half. You'll use the top half of the bottle for this trap. ^{[17]
X
Research source}
Use sandpaper to smooth the edge of the bottle. Also, tape over the edges with duct tape. ^{[18]
X
Research source}
Stretch the rest of the balloon over the bottle opening. It doesn't have to go over all the edges. It just needs to stretch across the middle in a single band. ^{[19]
X
Research source}
Part of a Popsicle stick would work well for this project. It should be shorter than the balloon band is wide. Round the edges. ^{[20]
X
Research source}
Add hot glue and a string. Place hot glue on the piece of wood. Glue down a strong piece of string across the wood. ^{[21]
X
Research source}
The balloon should go across the width of the balloon band. Let the strings go down on either side. Pull the ends through the mouth of the bottle, going from the inside of the bottle to the outside. ^{[22]
X
Research source}
Tie a knot in the thread that rests partway down the inside of the bottle. ^{[23]
X
Research source}
Use three pieces of sharp wood that are longer than the half bottle. Glue or tape them them on to each side. They should stick out past the mouth but not out past the other end. You'll use these to stick the tripwire in the ground. ^{[24]
X
Research source}
Use a small piece of wood that barely reaches across the mouth of the bottle. Tie a long string to the end. ^{[25]
X
Research source}
Tie the other end of the string to the top of a small stake. A Popsicle stick will work for this part as well. ^{[26]
X
Research source}
Place the small stick under the knot. Angle the wood across the mouth of the bottle. ^{[27]
X
Research source}
13
Set the bottle in the ground. Push the stakes in the ground, being careful not to pull the trigger. ^{[28]
X
Research source}
- To truly prank your friends , you need to disguise the trap somehow. However, you can't hide the top of the bottle, as that will release your trap.
Stretch the string out to the stake. Shove the stake in the ground. ^{[29]
X
Research source}
Tip flour or water into the balloon trap. ^{[30]
X
Research source}
When the wire is tripped, the balloon will throw the flour or water into the air, getting it all over your friend. ^{[31]
X
Research source}

Method 3

Method 3 of 3:

Making a Doorway Buzz Alarm with a Tripwire

Download Article

You'll need a clothespin, an electronic buzzer, a lithium battery, two-sided adhesive pads, a twist tie, fishing line, and a small piece of copper tape.
Use the twist tie to squeeze the ends together. You want to hold the clothespin open.
Use the copper tape to cover one of the open ends, wrapping it around the top. Smooth it down to the wood.
Use the adhesive pad. Use one sticky side to stick the red wire to the copper on the top of the clothespin.
Use the other sticky side to stick the buzzer to the top of the clothespin.
Place the stick pad on the inside of the clothespin mouth. Put it on the side without the copper. Stick the black wire to the top of it.
With the negative side towards the black wire, stick it down to the black wire. Center the wire on the battery.
The cardboard should be thin and about an inch wide and long. Poke a hole with a needle.
Use fishing wire. Tie a string around the hole.
10
Place the cardboard inside the clothespin mouth. Release the twist tie at the back of the clothespin. The string side should be near the mouth of the clothespin.
- Pull out the cardboard to test the clothespin. See if it buzzes. Place the cardboard back inside the mouth.
Use adhesive pads to stick up the clothespin. Run the tripwire across the doorway. Tape it up on the other side of the doorway. Make sure it's taut but not taut enough to pull out the cardboard without much pressure.
When someone crosses the tripwire, it pulls out the cardboard. The clothespin will close, connecting the circuit. The buzzer will sound.

Community Q&A

Search

Add New Question

Question

Can the water get filled with ants if left too long?

Community Answer

Yes, it can get filled with ants ,so change it every 1-2 weeks.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 9

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Be careful when working with hammers, drills, and nails. Always wear protective eye wear.

Thanks
Helpful 0 Not Helpful 1

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

[24]

[25]

[26]

[27]

[28]

[29]

[30]

[31]

Log in

How to Make a Tripwire

Steps

Creating a Tripwire Bang Alarm

Making a Tripwire Out of a Water Bottle

Making a Doorway Buzz Alarm with a Tripwire

Community Q&A

Tips

Warnings

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories