How to Measure a Bike Chain

PDF download Download Article
PDF download Download Article

If you need to replace the chain on your bike, determine how long the new chain needs to be. You can compare the original chain to the new chain and match the rivets. If you don't have the original chain or it's the wrong size, use the largest cog and chainring to find the cutting point on the new chain. If you'd find the measurement without handling a chain, use a mathematical equation. By counting the number of teeth in the chainring and sprocket, as well as measuring the length of the chainstay, you can determine how long the chain should be.

Method 1
Method 1 of 3:

Sizing to the Original Chain

PDF download Download Article
  1. If the original chain is the length you want the new chain to be, lay them next to each other so the plates are on their sides. Ensure that the plates on each chain line up. If you're using a master link chain, insert the master link so your measurement is accurate. [1]
    • For example, line up an outer plate with an outer plate or an inner plate with an inner plate.
  2. Insert a metal skewer or long rivet through the end of your chains that you won't be cutting through. The skewer will hold the chains together and keep rivets lined up while you're preparing to measure and cut. [2]
    Advertisement
  3. Because the original chain may have gotten longer over time, slide the rivets on that chain so they're directly next to the rivets on the new chain. [3]
  4. Once you've matched the rivets, you should clearly see where the original chain ends. Push the new chain down so the plates are facing you and use a marker to draw around the rivet that you'll cut. This rivet should match the rivet on the end of the original chain. [4]
    • Once you've cut or sized the new chain, it's ready to put on your bike.
    5. Advertisement
Method 2
Method 2 of 3:

Using the Largest Cog and Chainring

PDF download Download Article
  1. Move the front derailleur over the biggest front chainring and shift the rear derailleur to the smallest cog or sprocket. Drape the new chain around the biggest cog in the back. [5]
    • If you're using a connection rivet chain, move the end with the outer plate towards the front chainring. Keep threading the chain until the end is at the 5:00 position. [6]
    • If you're using a chain with a master link, put half of the master link in the plate.
  2. Gently tug on the lower portion of the chain and pull it onto the front chainring. Engage the chain on the front chainring so the rivet from the bottom of the chain meets the end of the top part of the chain. [7]
    • You won't need to pull the chain along the rear derailleur for this method.
  3. Locate the closest outer plate and inner plate where the chains meet. Use a marker to circle the rivet that can join the 2 chains. Then count 2 rivets down along the excess length of the chain. You'll cut the chain at this point, so consider drawing a line on it with a marker. Use your chain cutting tool to cut the chain to size. [8]
    • The 2 rivets will equal about 1 inch (2.5 cm), which should be enough of an adjustment for a rear derailleur. [9]
    4. Advertisement
Method 3
Method 3 of 3:

Calculating the Chain Length

PDF download Download Article
  1. Look on the big chainring to find its measurements. The number of teeth is designated by a number with a T following it. Use the first number on the big chainring at the front. For example, if your big chainring says 52/36T, it has 52 teeth. [10]
    • The full equation for calculating the chain length is as follows: (chainstayx2) + (chainring/4) + (rear sprocket/4) = correct chain length
  2. Check the second number on the sprocket to find how many teeth it has. For example, if you see 11/28T, it has 28 teeth. [11]
  3. Pull a tape measure from the center of the rear axle to the center of the crank bolt. Write down the length to the closest 1/8th or 0.125 of an inch to give you the length of the chainstay. Multiply this number by 2 and write it down. [12]
    • For example, if your chainstay is 16 1/4 inches or 16.25 inches, multiply that by 2 to get 32 1/2 (32.5) inches.
    • You'll need to write down the measurement in inches so you can use the equation. Once you've gotten the result, you can convert it to metric, if desired.
  4. Refer to the number of teeth that you wrote down. For example, if it has 52 teeth, divide it by 4 to get 13. Write this number down. [13]
    • Depending on the sprocket or chainring, you may have an odd number to divide by 4. The calculation will still work out if you have a decimal.
  5. Look at the number you of teeth you wrote down for the rear sprocket. If your sprocket had 28 teeth divided by 4, you'd write down 7. [14]
    • You may not get a whole number if the sprocket has an odd number of teeth.
  6. Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. [15]
    • For example, you'd add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do you figure out what type chain is needed?
    Aaron Kent
    Community Answer
    You calculate the amount of speeds on your bike (cogs * chain rings) and then look up "_speed chain." I recommend going with a reputable brand, such as KMC.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 22 Helpful 11
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      Sizing to the Original Chain

      • Metal skewer or long rivet
      • Original chain
      • New chain
      • Marker
      • Chain breaker

      Using the Largest Cog and Chainring

      • New chain
      • Marker
      • Repair stand, optional
      • Chain breaker

      Calculating the Chain Length

      • Tape measure
      • Calculator
      • Repair stand, optional

      You Might Also Like

      How to
      Adjust Bike Brakes
      How to
      Put On a Bicycle Chain
      How to
      Change a Bicycle Brake Cable
      How to
      Adjust Bike Gears
      How to
      Remove a Bike Chain
      How to
      Fix Stuck Bicycle Brakes
      How to
      Fix a Slipped Bike Chain
      How to
      Fix Brakes on a Bike
      How to
      Adjust Hydraulic Bicycle Brakes
      How to
      Shorten a Bike Chain
      How to
      Change a Rear Cassette
      How to
      Lube a Bicycle Chain
      How to
      Install a Chain Master Link Clip
      How to
      Fix a Broken Bicycle Chain
      Advertisement

      References

      1. ↑ https://www.parktool.com/blog/repair-help/chain-length-sizing#article-section-4
      2. ↑ https://www.parktool.com/blog/repair-help/chain-length-sizing#article-section-4
      3. ↑ https://www.parktool.com/blog/repair-help/chain-length-sizing#article-section-4
      4. ↑ https://www.parktool.com/blog/repair-help/chain-length-sizing#article-section-4
      5. ↑ https://www.parktool.com/blog/repair-help/chain-length-sizing#article-section-4
      6. ↑ https://www.parktool.com/blog/repair-help/chain-length-sizing#article-section-4
      7. ↑ https://www.youtube.com/watch?v=O0YibMDWBAw
      8. ↑ https://www.youtube.com/watch?v=O0YibMDWBAw
      9. ↑ https://www.sheldonbrown.com/derailer-adjustment.html#chain
      1. ↑ https://www.youtube.com/watch?v=Vg2SoOOrpE8
      2. ↑ https://www.youtube.com/watch?v=Vg2SoOOrpE8
      3. ↑ https://www.youtube.com/watch?v=Vg2SoOOrpE8
      4. ↑ https://www.youtube.com/watch?v=Vg2SoOOrpE8
      5. ↑ https://www.youtube.com/watch?v=Vg2SoOOrpE8
      6. ↑ https://www.youtube.com/watch?v=Vg2SoOOrpE8

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 102,129 times.

      Did this article help you?

      Advertisement