How to Measure and Determine the Cost of a Cord of Wood

PDF download Download Article
Everything you need to know about measuring and purchasing wood
PDF download Download Article

Wood is sold to consumers by the cord, but if you've never purchased wood before, you might be wondering what a cord of wood actually is. Moreover, since firewood is rarely sold by the full cord, there are certain considerations worth keeping in mind when you want to find the best value.

How big is a cord of wood?

A full cord of wood is roughly 128 cubic feet or 3.5 cubic meters.

Method 1
Method 1 of 3:

Understanding the Terminology

PDF download Download Article
  1. A full cord, also referred to as a "cord," is a stack of wood that measures 4 feet (1.2 m) wide, 4 feet (1.2 m) tall, and 8 feet (2.4 m) long. Its total volume should be 128 cubic feet (3.5 cubic meters). [1]
    • Note that the exact amount of solid wood in a cord will vary based on the size of each piece, but most cords of firewood average 85 cubic feet (2.4 cubic meters) of solid wood. The remaining volume is taken up by air.
    • The entire length of the pile should be 8 feet (2.4 m), but the length of each piece of wood matches the width or depth of the pile and should average about 4 feet (1.2 m).
    • Even though the cord is the standard unit of measurement when selling wood, most firewood dealers do not sell 4-ft (1.2-m) long pieces of wood to home consumers. As a result, other cord-based terminology is often introduced.
  2. A face cord is the next most common unit of measurement. It refers to any stack of wood that is 4 feet (1.2 m) high and 8 feet (2.4 m) long. The depth or width of the pile is less than 4 feet (1.2 m), which means that each piece of wood in the pile is less than 4 feet (1.2 m) long. [2]
    • There is no single agreed upon length for pieces of wood in a face cord. On average, the length of most firewood is 16 inches (40.6 cm), so the depth of most face piles is 16 inches (40.6 cm). This is one-third the depth of a full cord.
    • Other piece lengths can also be used, however, so you'll need to make sure that you find out how long the average piece in a face cord is before you make the purchase.
    • While "face cord" is the most common terminology used to describe piles like this, "stove cord,” "furnace cord," “run,” and “rick” are also used and refer to the same thing.
    Advertisement
  3. A thrown cord or loose thrown cord is a rough measurement of volume on wood that has been tossed or dumped into a truck, rather than stacked into neat, compact piles.
    • A loose thrown cord should take up about 180 cubic feet (6.66 cubic yards or 5.1 cubic meters) of space as is. The idea is that, when stacked, the total volume would equal roughly 128 cubic feet (3.5 cubic meters), or the volume of a full cord. A "thrown" cord takes approximately 30%+- more space than a stacked cord. A typical pickup truck w/ 6ft. bed is 54 cubic feet (2 cubic yards - level load-Stacked); an 8ft. bed is 81 cubic feet (3 cubic yards - heaped load- Stacked). Remembering now! that "thrown" takes 30%+- more (space) than stacked. Therefore a 6ft. truckload has 30%+- of a "thrown" cord; an 8ft. truckload has 45%+- of a "thrown" cord.
    • This usually applies to wood pieces between 12 and 16 inches (30.5 and 40.6 cm) long.
    • When wood pieces are sold in lengths of 2 feet (60.1 cm), total thrown cord volume should be about 195 cubic feet (5.5 cubic meters).
  4. A green cord refers to a measurement that was taken before wood was split and dried. As such, the current or dried volume can be smaller than the indicated volume by 8 cubic feet (0.23 cubic meters).
    • The green cord volume should be 180 cubic feet (5.1 cubic meters) if loosely stacked or 128 cubic feet (3.5 cubic meters) if neatly stacked, just as you would expect of a loose cord or full cord, respectively.
    • When green, unseasoned wood is dried, the wood shrinks by about 6 to 8 percent. Firewood dealers sometimes measure and price their merchandise by the green cord instead of full cords or loose cords as a way to make up for the money they would otherwise lose from the shrinkage of wood.
  5. Sometimes, a dealer might try to sell wood by rough measurements like truckloads, piles, station wagon loads, or pick-up truck loads. [3]
    • Measurements like these are not regulated and can be difficult to compare, so you might end up getting far less wood than what you paid for if you trust them.
    • Some states within the United States even ban the sale of firewood by measurements not based on the full cord.
    6. Advertisement
Method 2
Method 2 of 3:

Measuring Cords

PDF download Download Article
  1. If possible, avoid buying wood by telephone or online. Visit the supplier yard yourself and take your own measurements.
    • Measuring from the stacks of wood you plan on purchasing is the safest way to know exactly what you are getting.
    • If you cannot measure the wood yourself or see the wood before you buy it, at least go through a known dealer with a positive reputation. After you receive the wood, take your own measurements to make sure that you were not cheated.
  2. Take a tape measure or yardstick and measure the height and length of the entire pile.
    • For both full cords and face cords, the length should be 8 feet (2.4 m) and the height should be 4 feet (1.2 m).
    • The exact length and height can vary when you purchase a thrown cord, but you should still measure these dimensions and check them against the dimensions listed by the dealer.
  3. Take your tape measure or yardstick and measure the depth of the pile, or the average length of each piece of firewood in that pile. [4]
    • Measure the average log length, not the length of the longest piece or the shortest piece.
    • For full cords, the length must be 4 feet (1.2 m). For thrown cords, the length must bring the overall volume of the stack to 180 cubic feet (5.1 cubic meters) when multiplied by the measured height and length of the pile.
    • If you are purchasing a face cord, keep this measurement on hand so that you can use it to calculate the full cord value.
    4. Advertisement
Method 3
Method 3 of 3:

Determining Value

PDF download Download Article
  1. If you are buying a face cord, divide the depth of a full cord by the piece length of the wood in your face cord. Multiply this quotient by the price of your face cord to determine the cost of the full cord. [5]
    • Remember that the depth of a full cord is 4 feet (1.2 m) or 48 inches (1.2 m or 122 cm).
    • For instance, if Bob is selling a face cord with an average piece length of 16 inches (40.6 cm) for $90, the calculation would look something like this:
      • 48 inches (122 cm) / 16 inches (40.6 cm) = 3
      • 3 * $90 = $270
      • The full cord value would be $270.
  2. If you know the average market rate of a full cord in your area, you can compare the full cord value of the face cord you measured to that. If you do not know the average cost, however, you might need to shop around some and figure out your own average.
    • It might save time to call each dealer and ask for their face cord price and piece length measurement, rather than going to each one and taking your own measurements.
    • You should still measure the average piece length of the face cord you plan to buy once you've made your decision, though, just to make sure that the dealer's measurements match your own.
  3. If the piece length offered by each dealer is the same, you can compare face cord costs. If the piece lengths vary, however, you need to calculate the full cord value of each and compare those values to one another.
    • In the previous example, Bob sold firewood at a full cord value of $270.
    • If Sally sold 12-inch (30.5-cm) long pieces of firewood at $70, the full cord value would be:
      • 48 inches (122 cm) / 12 inches (30.5 cm) = 4
      • 4 * $70 = $280.
    • If Sam sells 8-inch (20-cm) long pieces of wood at $60, the full cord value would be:
      • 48 inches (122 cm) / 8 inches (20 cm) = 6
      • 6 * 60 = $360
    • Even though Bob has the highest face cord price, he has the lowest full cord value at $270. Sally's full cord value is close at $280, but Sam's full cord value is by far the most expensive at $360, even though Sam's face cord cost was cheapest ($60). As such, the best value for your money would be Bob's face cord.
  4. Even though full cord value is the best way to get the best deal, there are other factors to consider that usually increase the value and cost of wood.
    • Shorter lengths usually cost more because of the cost of cutting and handling.
    • Firewood cut into consistent lengths may cost more because more work went into maintaining that even length. Finely split pieces usually cost more because of the extra labor, as well.
    • Dry wood can cost more because it has been stored under better conditions.
    • Cleaner firewood is also more valuable because it is more pleasant to the consumer when it comes time to burn it.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How many square feet is in a piled and split cord of wood?
    Community Answer
    A cord measures four feet high by four feet wide by eight feet long (4 ft. x 4 ft. x 8 ft.) and has a volume of 128 cubic feet. The amount of solid wood in a cord varies depending on the size of the pieces, but for firewood it averages about 85 cubic feet.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 27
  • Question
    How much is a "rank" of wood?
    Donagan
    Top Answerer
    A rank (or rick) is the equivalent of about one-third of a cord.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 31
  • Question
    A stack of split wood 3 ft wide by 4 ft tall by 16 ft long is how much wood?
    Jemsd3164
    Community Answer
    This is 192 cubic feet, or 1.5 cords of wood, if it is tightly packed. 3x4x16 = 12x16 = 192. 192/128 = 1.5, or one and a half cord.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 23
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      • Tape measure or measuring stick

      You Might Also Like

      How to
      Make Wood Pellets
      How to
      Season Firewood
      How to
      Store Firewood
      How to
      Dry Firewood
      How to
      Kiln Dry Firewood
      How to
      Build a Firewood Rack
      How to
      Make Tinder for a Fire
      How to
      Split Hardwood Firewood
      How to
      Sell Firewood
      How to
      Dry Wood
      Advertisement

      References

      1. ↑ https://www.woodheat.org/cord-wood.html
      2. ↑ https://www.northlineexpress.com/face-cord-vs-full-cord-of-firewood.html
      3. ↑ https://woodheat.org/cord-wood.html
      4. ↑ https://www.firewood-for-life.com/firewood-measurements.html
      5. ↑ https://woodheat.org/cord-wood.html

      About This Article

      Article Summary X

      To measure a cord of wood, use a tape measure to find the dimensions of the pile; a full cord and face cord should both be 8 feet long and 4 feet high. Then, use your tape measure to get the depth, or average length of each individual log, which should be 4 feet for a full cord. For a thrown cord, the depth should be enough to get a volume of 180 cubic feet when multiplied by the length and height. To calculate the full cord value, divide 4 feet by the average depth of your pile, then multiply by the price. For more tips, including how to determine the value of your cord, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 709,303 times.

      Reader Success Stories

      • Graham Padgham

        Apr 30, 2017

        "As a complete novice, this simply but comprehensively gave me all the information I needed, made it clear what all ..." more
        Rated this article:
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement