PDF download Download Article
The best, most effective DIY cleaning agents for eliminating mold
PDF download Download Article

If you’ve ever seen mold in your car, you’ve probably wondered how it got there and, more importantly, how to get rid of it. Cleaning up mold is a little different than cleaning up normal dirt and grime that builds up on the surfaces of your car. Mold can cause health issues, so it’s especially important to take care of it as soon as possible. We spoke with House Cleaning Professional Dario Ragnolo and Cleaning Expert Ilya Ornatov from NW Maids to learn how to clean up a mold infestation. This article covers getting rid of mold, what cleaning agents to use, and how to prevent it. Plus, we’ll tell you why mold grows in cars and any health risks that are associated with it.

Removing Mold in a Car: Quick Steps

  1. Air out your car and make a note of where mold is growing.
  2. Wear gloves, a mask, and goggles to vacuum out the car.
  3. Spray the mold with a cleaner and let it sit for at least 10 minutes.
  4. Use a soft-bristle brush to scrub the moldy areas.
  5. Thoroughly re-vacuum the entire car.
  6. Let the car completely dry before closing it up again.
Section 1 of 6:

Getting Rid of Mold in a Car

PDF download Download Article
  1. Mold thrives in a damp environment. Opening all the doors helps to dry out your car. [1] Park the car in a sunny area to allow the heat of the sun to help with the drying process.
  2. Once your car has dried out, use a wet/dry vacuum cleaner with a HEPA filter to go over the entire interior of the car. Make sure to wear a mask, gloves, and eye protection to prevent fungal lung, eye, and skin irritation. [2]
    Advertisement
  3. Mix 2-3 drops of dishwashing liquid in 1 gallon (3.78 L) of water. Dip the soft-bristled brush in the soapy water and gently scrub the spots of mold. [4] It’s not necessary to kill the mold. As long as you address any moisture problems in the car, the mold spores can’t grow. [5]
    • However, to ensure the mold is no longer active, mix no more than 1 cup (240 mL) of bleach with 1 gallon (3.78 L) of water and apply the mixture directly to the mold to kill it.
    • There are a few other options to make sure the mold is dead.
      • Specialized mold removers
      • Undiluted 3% hydrogen peroxide [6]
      • 1 cup (204 g) of Borax mixed with 1 gallon (3.78 L) of water [7]
      • Undiluted vinegar [8]
      • 1 teaspoon (5.69 g) of baking soda mixed with 2 cups (470 mL) of vinegar [9]
    • Ornatov recommends soaking the area in a solution of 2 cups (470 mL) of vinegar to 1 cup (240 mL) of water and leaving it sit for 30 minutes. Then, wipe clean.
    • NEVER combine bleach and ammonia. They produce a toxic vapor when they are mixed.
    • Bleach also reacts with hydrogen peroxide and other cleaning products, so only mix it with water to be safe. [10]
  4. Go over your car again with a wet/dry vac to pick up as much mold as possible. The wet/dry vac also helps remove excess water in your car.
    • Optional: Follow up with a steam cleaner to remove mold in hard-to-reach areas.
  5. If you don’t allow your car to dry completely before closing it up again, the mold will likely return. So, make sure every surface in your car’s interior is completely dry. If possible, use fans to help any moisture dry. [11]
  6. Advertisement
Section 2 of 6:

Removing Mold from Car ACs

PDF download Download Article
  1. Smelling a musty odor when you turn on your car’s AC is a sign you may have mold in the system. Mold is still a problem even when you can’t see it, but getting rid of it is a little trickier. Kill mold in your car’s AC by turning the car off and spraying a disinfectant into the air vents. [12]
    • Then, turn on the car and switch the AC to fan mode – so it’s not cooling the air – with the fan on high.
    • With the fan still running, set the system to recirculate the air. An image of a small car with a U-shaped arrow inside usually identifies this feature.
    • Spray the disinfectant into your car’s recirculation vent. It’s often on the driver’s side floor, near the console, or in the trunk. Check your owner's manual if you can’t find it.
    • If you continue to smell mold when you start your car, replace the cabin filter .
    • With the doors open, run the car for 5 minutes running the fan on full power to dry everything out.
Section 3 of 6:

Signs of Mold in Cars

PDF download Download Article
  1. Most molds produce a musty odor, which is often the first sign of a problem. Since it grows anywhere with adequate moisture, it often infests your car’s air conditioner evaporator and ducts. This means you may smell mold long before you see it.
  2. This is the most obvious sign that you have mold in your car. Mold can come in an entire rainbow of colors, but the most common are black, gray, or green. However, the color doesn’t really tell you anything about the type of mold or any potential health risks. [13]
    • Most of the time, when people are talking about black mold, they’re referring to Stachybotrys chartarum . While people believe this mold is more dangerous than others, there’s no evidence that it poses any serious health risks. [14]
  3. Advertisement
Section 4 of 6:

Preventing Mold in Cars

PDF download Download Article
  1. Ragnolo says, “Mold is generated by humidity, and so you should be reducing that at a minimum.” Cleaning your car regularly and allowing it to completely dry is the best way to prevent this growth. It’s also important to clean up any spills immediately. [15]
    • Use a fungicide after you clean to ensure you’ve killed any mold that’s present in your car.
    • Parking your car in the sun instead of in a damp garage also helps prevent mold growth. Ragnolo recommends ventilation and allowing sunlight to reach mold-prone areas to help prevent growth.
    • Use a moisture trap to dry out the air inside your car.
    • Ventilate your car and turn up the heat to dry out the air vents.
  2. Check the weather stripping on the doors, windows, and sunroof for leaks. Fix a leaky sunroof by first clearing the drain tubes. Then, check for cracked or damaged door and window seals.
  3. Advertisement
Section 5 of 6:

Health Risks of Mold

PDF download Download Article
  1. Many people have allergic reactions to mold, causing sneezing, runny nose, red eyes, and rashes. Mold also causes asthma attacks in people who are allergic to it and suffer from asthma. [16]
  2. People with asthma or cystic fibrosis may develop a fungal infection of the lungs called allergic bronchopulmonary aspergillosis. [17] In rare cases, those exposed to mold develop hypersensitivity pneumonitis, which is lung inflammation triggered by mold spores and dust. [18]
    • It’s impossible to avoid mold exposure completely, but there are effective treatments to help those who are sensitive to molds. [19]
  3. Advertisement
Section 6 of 6:

Why Mold Grows in Cars

PDF download Download Article
  1. If your car gets damp and doesn’t dry out all the way, mold spores from the air will begin to grow. While it prefers warm, humid conditions, it also grows in cold weather. Mold spores are everywhere, but they can’t grow without sufficient moisture. [20] Here are a few conditions that might cause mold to grow in your car:
    • You’ve been driving in wet weather or left your windows open.
    • There’s excess condensation and bad ventilation in your car.
    • Your sunroof, windshield, or windows is leaking.
    • You spilled a beverage or left wet items in your car.
    • Your car has been sitting in a damp place for a long time.
    • You don’t clean your car regularly.
    • The car was flooded during inclement weather events.

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Thanks to all authors for creating a page that has been read 662 times.

      Did this article help you?

      Advertisement