Download Article
Learn how to clean, sand, and finish veneer furniture
Download Article
Veneer is a decorative wood layer that's overlaid on a different surface. Veneer can be primed, painted, stained, and treated just like any other wood surface. Painting veneer surfaces is a great way to spruce up furniture, make older pieces look newer, or make an original piece match a new décor scheme. The trick to painting veneer is to clean, sand, and prime it before applying a finish coat of paint.
Things You Should Know
- Fill in chipped areas with wood filler and smooth it down with a putty knife. Then, wipe down the furniture with an ammonia-based cleaner.
- Sand your furniture with 220-grit sandpaper using an orbital sander. Wipe up the dust with a damp cloth then apply a thin, even coat of primer.
- Apply a thin, even coat of paint once the primer is dry. Wait for the paint to dry then seal it with a thin layer of clear varnish.
Steps
-
Move small projects outside. Sanding and painting are dirty jobs that create lots of dust and fumes. For painting projects that are small and easy to move, transfer them to an outdoor location where you can work.- A garage or shed is also a great place to work if the weather won't allow you to paint outside.
-
Ventilate the room. When you have to work inside, protect yourself from fumes by opening windows and doors to let fresh air in. You should also open vents to let the fumes escape, and turn on ceiling or stand-up fans to keep fresh air circulating.Advertisement -
Cover the surrounding area. Protect the floor and the area around your workspace by laying down a drop cloth or large piece of plastic sheeting. If the object you're painting is too large to move, arrange the drop cloth on the floor around it and secure the sheet in place with painter's tape. -
Remove any hardware. Veneer is most often found on furniture and interior decoration items, and these pieces sometimes have hardware like handles, hinges, and brackets. To protect these items from paint, remove them before you start the project. Most hardware can be removed with a screwdriver. [1] X Research source- After you remove the hardware and screws, store them together somewhere safe where they won't get lost or forgotten.
-
Tape adjacent areas you don't want painted. Some veneer surfaces are attached or adjacent to other surfaces that you may not want to paint. For instance, if you're painting a desk but don't want to paint the legs, you should protect the legs.- To cover small areas, use painter's tape to seal the area. For larger areas, cover the surface with plastic and tape the plastic in place.
Advertisement
-
Fix marks and chips. Before you paint the veneer, you have to fill in any areas where the veneer has been chipped, gouged, or dented. Remove any loose chunks of veneer and sand down the edges around each hole. Fill each hole with wood filler, and then smooth it out with a putty knife. Make sure the hole is completely filled in with putty. [2] X Research source- Let the putty dry completely before proceeding.
- Follow the manufacturer's directions regarding drying time. Depending on the depth of the holes, drying time could take anywhere from a few minutes to several hours.
-
Clean the surface with degreaser. Paint won't properly stick to a surface that's covered in dirt, grease, oil, or grime. To ensure the paint has a clean surface, wipe the area with a degreasing cleaner, such as ammonia-based cleaners, denatured alcohol, or ½ cup (4 ounces) of trisodium phosphate mixed with ½ gallon (1.9 L) of water.- Use a clean sponge or non-abrasive scrubbing pad to scrub the veneer surface with the degreaser.
- After cleaning, wipe the area down with a clean damp cloth to remove leftover degreaser.
- Let the surface dry completely.
-
Sand the surface. Outfit an orbital sander with 220-grit sandpaper. [3] X Research source Sand the veneer to smooth out the wood filler, even out the surface, and gently scratch the veneer. This will give the primer something to stick to.- You can use a sanding block to sand small areas, but an orbital sander will make the job go much faster.
- Use a sanding block to reach crevices and hard-to-reach areas.
-
Vacuum and dust. Before you start painting, it's important to remove all traces of dust and particulates that were created by the sanding. Vacuum the piece and the surrounding area to remove excess dust, and then wipe the piece down with a slightly damp cloth. [4] X Research source- Give the surface some time to dry before priming.
Advertisement
-
Choose the right paint and primer. Because veneer is wood, you have lots of options when it comes to paint types. Typically, you'll start with a primer that matches the paint type, then paint the surface, and then finish with a protective clear coat, varnish, or sealant.- Popular paint types for wood include oil-based enamel paints, water-based enamel paints, chalk paint, milk paint, hi-gloss enamel, stains and varnish, and acrylic paint. [5] X Research source
-
Apply primer. Stir your primer and fill the reservoir in a paint tray. Start by using a brush to prime nooks, edges, corners, and cracks. Then, saturate a roller with primer and roll off the excess on the tray. Apply a thin and even coat of primer to the rest of the veneer surface. [6] X Research source- Primer provided a better adhesion of paint to the surface. Without it, your paint can prematurely peel.
- Once the primer has been applied, let it dry for at least three hours before applying your first coat of paint. Check the manufacturer's instructions for exact drying time.
-
Paint the surface. Once the primer has had time to dry, you can apply the first coat of paint. Stir the paint and fill the reservoir of a clean paint tray. Use a clean brush to paint inside cracks, get into corners, and paint edges. Switch to a roller to paint the rest of the veneer. Apply a thin and even coat of paint to the entire surface. [7] X Research source- Once the first coat of paint has been applied, let it dry before deciding whether you have to paint a second coat.
- If the surface looks pretty good with one coat of paint, you may still want to apply a very light second coat, just to fill in any little gaps or missing spaces.
- If a second coat is required, follow the manufacturer's instructions for drying time between coats.
- Depending on the type of paint, you may have to wait anywhere from two to 48 hours between coat applications.
-
Apply a varnish to seal and protect the paint. When the final coat of paint has dried, use a clear coat, varnish, or sealant to protect the painted veneer surface. Fill a clean paint tray with clear coat. Use a brush to access cracks and corners. Use a roller or foam brush to apply a thin and even layer of clear coat to the rest of the surface. [8] X Research source- Varnish or clear coat is especially important with furniture that gets used often, such as desks, dressers, and tables.
-
Remove tape after the final coat. To remove the tape, pick off an edge with your fingernail. Pull the tape toward you at a 45-degree angle to the ground. Use a razor or knife to cut away any paint that's stuck to the tape before removing the tape.- It's important to remove the painter's tape when the project is still wet. Otherwise, paint may dry to the tape and peel off with the tape, ruining your project.
-
Let the piece dry and cure. Your paint may be dry within a few hours, but it could take a couple weeks to cure properly. Curing is the hardening and strengthening process, and you don't want to put your painted veneer into heavy use until the paint has had time to fully cure.- Curing time may take anywhere from a week to 30 days. Check the manufacturer's instructions for the complete curing time of the paint you chose.
-
Reinstall the hardware. After the paint has had time to cure, use a screwdriver to reaffix the hardware that you removed before painting. Once the hardware has been reinstalled, you can return the piece to its original place and use it again as normal.
Advertisement
Community Q&A
Search
-
QuestionCan I use 100 grit to sand, as it's what I have on hand, or do I definitely need 220?GabrielCommunity AnswerYou can use 100 grit sandpaper to sand or remove paint. It will be rougher and not as smoothly finished as a finer 220 grit sandpaper. Just be aware that the veneer could be thinner and damaged if you sand too much.
-
QuestionCan I use it over shellac primer?Community AnswerYes, you can. It would be my go-to primer for all types of projects. It dries quickly but is a killer on brushes and rollers. Also, move fast, as I does dry very quickly.
-
QuestionCan I use a Paint & Primer in one such as "Behr Ultra Scuff Defence Stain-blocking paint and Primer" to paint furniture without using a primer as well?DonaganTop AnswererYes. You don't need a separate primer, although the super-fastidious among us might choose to use one.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Veneer and laminate are sometimes confused, but whereas laminate is a layer of plastic or other synthetic material, veneer is made of hardwood.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Drop cloth or plastic sheet
- Screwdriver
- Painter's tape
- Putty knife
- Wood filler
- Degreasing cleaner
- Rags or cloths
- 220-grit sand paper
- Orbital sander
- Vacuum
- Paint stir stick
- Paint tray
- Paint brush
- Paint roller
- Paint
- Primer
- Varnish
References
- ↑ http://www.honeybearlane.com/2013/11/how-to-paint-laminate-and-veneer.html
- ↑ http://grillo-designs.com/how-to-repair-damaged-veneer/
- ↑ http://www.willscasa.com/2012/05/how-to-stain-paint-veneer-furniture/
- ↑ https://www.bobvila.com/articles/30124-dream-it-do-it-how-to-paint-wood-furniture/#.WKIdGX9vtf0
- ↑ http://realitydaydream.com/the-difference-between-laminate-and/
- ↑ http://www.ikeahackers.net/2014/10/painting-guide-easy-to-follow-tip-on-how-to-paint-veneer-finish.html
- ↑ https://www.bobvila.com/articles/30124-dream-it-do-it-how-to-paint-wood-furniture/#.WKIdGX9vtf0
- ↑ http://www.willscasa.com/2012/05/how-to-stain-paint-veneer-furniture/
About This Article
Article Summary
X
To paint a wooden object that’s already covered with veneer, wipe down the veneer with degreaser and let it dry completely, then lightly sand the piece with 220-grit sandpaper. Wipe away any dust created by the sanding, then apply a coat of primer on top of the veneer. Once the primer dries, apply the first coat of paint. It may take 2-3 coats to fully cover the object, so be sure to let the paint dry completely between coats. For tips on filling in chips or gouges in the veneer, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 368,570 times.
Reader Success Stories
- "Was just wondering if you could paint over veneer and how. Wiki confirmed my thoughts and my wife's old sewing desk is about to be renewed!" ..." more
Advertisement
92%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Was just wondering if you could paint over veneer and how. Wiki confirmed my thoughts and my wife's old sewing desk is about to be renewed!"
..."
more
"Very informative, yet I cannot save it to Pinterest where I'm collecting information to use."
"Great. Clear and loved the pictures. Will watch the video next. Thank you."
