How to Paint Wine Glasses

Co-authored by Douglass Brown

Last Updated: July 8, 2024 Approved

At the moment, it seems like hand painted wine and martini glasses are all the rage! And doing it yourself is definitely possible (and relatively easy) at home. In fact, painting on wine glasses is a fun way to create unique, personalized, and inexpensive gifts for friends and family. Or just to keep in your own kitchen!

Method 1

Method 1 of 3:

Readying the Glass

Download Article

1
Wash the glass well in warm, soapy water. ^{[1]
X
Research source} Whether you're using a new glass or one of your old favorites, it can accrue a layer of dust or dirt just sitting in storage. Make sure it's sparkly clean -- run it under soapy water and rinse it well.
- Allow it to adequately dry. You don't want to paint on glass that's streaky or wet.
2
Clean the surface of the wine or martini glass with rubbing alcohol and a paper towel. Remove any oil, dirt, soap film, or fingerprints that will mess up your paint work. ^{[2]
X
Research source} Let the glass sit to dry for about 7-10 minutes after rubbing.
- If you don't have rubbing alcohol, use white vinegar; it has similar cleaning properties.
Advertisement
3
Place masking tape on the rim of your glass. You want a solid 3/4" (2 cm) of your rim to be paint free. As some paint is toxic, it's important not to paint on any surface that could reach your mouth. What's more, the paint will be more likely to deteriorate if it meets drink or your lips.
- Make sure the tape is even. If it's not perfect, it's super easy to adjust. Use masking or painter's tape for best results.

Method 2

Method 2 of 3:

Designing Your Glass

Download Article

1
Sketch your design first on a piece of paper. If you draw the pattern on a piece of paper or tissue paper, this will allow you to insert it inside the glass, secure it, and use the pattern to transfer and paint over the design. Tissue paper will be easier to work with as it bends much more easily.
- You by no means need to create a design that requires a sketch. Geometrical and abstract patterns are just as beautiful, if not more so. If it'd be helpful, use tape to devise a pattern on the outside of your glass; you can then easily paint around it. Same goes for the stem and base!
2
Secure your stencil to the glass. There are so many products out there, it's tough to know where to get started. The simplest way is to sketch your design and secure it with tape on the inside of your glass. ^{[3]
X
Research source} You have a couple more options, however:
- Place your sketch inside your glass and fill it with something like a sock or quilt batting. The soft interior will keep it in place, intact.
- Buy self-adhering stencils at your local craft supply store. If you can fathom its existence, it can be found. Stencils come in sticker form nowadays, and you can just plop them onto your glass and paint away.
3
Sketch the design onto the glass. ^{[4]
X
Research source} Use a fine point sharpie (or marker that will not wipe off) to sketch a design on the glass. If you don't like your sketch, you can use a q-tip or cotton ball dipped in rubbing alcohol or nail polish remover to "erase" the marker or paint.
- This outline will probably remain visible. If you want to go for a more of a "One Stroke" method, skip sketching directly on the glass, and just paint using the sketch underneath.
4
Choose your paints. As with stencils, it's easy to walk into the paint aisle and feel absolutely overwhelmed. There are a handful of varieties to choose from and the differences are really only nuanced -- they'll all create something pleasurable to the eye. What you choose is just a matter of current mood and taste.
- Enamels (like Folk Art or Martha Stewart) are water-based and especially geared toward glass painting. They can handle the dishwasher if cured (not necessarily the microwave, however) -- but some require a primer and top coat (like PermEnamel), so note the label.
- Acrylics work, too. However, it generally depends on the quality of the paints you choose -- some are more prone to washing off. If you do go the acrylic route, spray a high-quality varnish on top (they have sparkly ones!) to secure the paint to the glass. ^{[5]
  X
  Research source}
  - There are acrylics that are designed more for glass painting. If acrylic is your jam, use this variety.
- Regardless of what type of paint you end up using, you'll probably encounter air dry and heat dry forms. In general, the glasses that are baked (require heat drying) last longer.
- To add more spice to the mix, you'll also have the option of choosing transparent (light will pass through), opaque (light will not pass through), and frosted paints. Decisions, decisions.
- They've officially thought of everything -- glass paint markers are available, too. They bake on and make even the most detailed of glasses beginner-doable.
EXPERT TIP

Douglass Brown
Glass Artist
Douglass Brown is a Glassblowing Expert based in Half Moon Bay, California. He has over 25 years of experience as a glass artist and is the owner and operator of 2 glass blowing studios in the San Francisco Bay Area — Half Moon Bay Art Glass and Mare Island Art Glass. Douglass believes in sharing hot glass experiences with anyone who wants to learn about the processes of blowing and sculpting glass. When not teaching, Douglass creates glass art that is a mix of his takes on nature and functional glassware. He has also created the Glass Troubadours, which is a mobile glass-blowing studio that hosts parties and events, and visits craft shows.

Douglass Brown
Glass Artist

There are two types of materials you can use to paint glass: varnish and glass powders. Varnish is not very permanent, whereas glass powders are. In the past, classical glass windows were made by painting vitreous enamels on the surface and then firing the glass.
5
Prep the area. Though it should go without saying, paint isn't fun to pick off your favorite sweater or your grandma's mahogany table. Go change your clothes, and lay down several layers of newspaper or wax paper -- anything to protect those surfaces. And take the dog outside.
- While you're at it, open the windows. Being high on paint fumes isn't the state you want to be in for this project!
6
Start coloring. Glass painting methods number no fewer than canvas painting methods. This part is entirely up to you. But if you're looking for a little inspiration, here's a few jumping off points:
- Create a marbleized glass by pouring your paint over your piece, top to bottom. Pour in a thin even layer, rotating the glass consistently. Alternate colors as desired. Liquid fill paints will be best for this method.
  - Use just one color and pour on until completely covered to create a solid painted glass.
- Use tape to make stripes. Just after you've painted between the stripes, take it off; if the tape is taken off when the paint is dry, you risk chipping the paint. If you have any quirks in your stripes, just take your craft knife and carefully chip away until the lines are straight.
- Get polka-dotting. The blunt end of your paintbrush is great for dots, or you can use a dauber or spouncer. To do this effectively, never come in or go out at an angle. Always place your tool straight down and take it straight back up.
- Use sponges. Whether it's a dish sponge or a sponge brush, you can create interesting, layered designs with a dab of paint -- little skill required.
- Add colors on top of each other to create shading and highlighting. That's just painting 101.
- Don't forget the stem and base! Half of your "canvas" isn't the actual glass (if you're using a wine glass). For the base, consider painting the underside to achieve an is-it-there-is-it-not-there look. You know the kind.
  - If you were wondering about paintbrushes, unless you're an avid painter, they're all pretty much the same. But if we're splitting hairs, the synthetic ones will be more stroke-y; natural-haired brushes will paint a smooth, complete picture.
Resin-based paints are incredibly temporary until baked and can even be removed with warm water. If you absolutely must remove the paint, do so quickly.

Method 3

Method 3 of 3:

Setting the Paint

Download Article

1
Let it dry. Allow the glass to dry for at least 24 hours before proceeding to the next step of heat setting. Stand them upside down on a soft surface such as a folded tea towel to allow them to dry. Try to keep them away from the kitchen or bathrooms, where moisture could affect the drying.
- If you're air drying, it may need to be left to its lonesome for up to three weeks. Follow the instructions on the paint's label.
2
Heat set the glass. If you chose the kind of paint that needs baking to be set, you've reached that time. The process is very straightforward and no, your glass won't melt!
- Line a cookie sheet with aluminum foil.
- Turn your oven to 350ºF (180ºC). There is no preheating required. The idea is to put the glass in a cold oven -- this will gradually increase heat as opposed to placing the glassware in a hot oven, which might cause the glassware to break.
- Immediately put the glasses on the lined sheet and place in the oven.
- Set a timer for 30 minutes. Turn off the heat after 20 minutes, but leave the glass in for a further 10 minutes. Then, remove the glasses after the 30 minutes is up.
  - Or, do as-is instructed by the manufacturer on the label of the paints you've used (this is done to make the item washable).
EXPERT TIP

Douglass Brown
Glass Artist
Douglass Brown is a Glassblowing Expert based in Half Moon Bay, California. He has over 25 years of experience as a glass artist and is the owner and operator of 2 glass blowing studios in the San Francisco Bay Area — Half Moon Bay Art Glass and Mare Island Art Glass. Douglass believes in sharing hot glass experiences with anyone who wants to learn about the processes of blowing and sculpting glass. When not teaching, Douglass creates glass art that is a mix of his takes on nature and functional glassware. He has also created the Glass Troubadours, which is a mobile glass-blowing studio that hosts parties and events, and visits craft shows.

Douglass Brown
Glass Artist

Paints that require heat drying will last longer. Use the right kind of paint and procedures to ensure longevity. When colored glass is properly cured with heat, it can be baked in the oven and washed in dishwashers without fading or peeling.
3
Embellish your creation. Since some of your glasses might be suitable to give away for birthdays and other occasions, you could fill them up with candy, confetti, or birthday horns, etc. They make for great pieces to be used and taken home.
- Consider signing your name or adding the name of the recipient to the bottom of the glass. Add a dab of glue and secure on a bow. A gift too pretty to be wrapped!

Expert Q&A

Search

Add New Question

Question

How can I cut wine glasses?

Douglass Brown
Glass Artist
Douglass Brown is a Glassblowing Expert based in Half Moon Bay, California. He has over 25 years of experience as a glass artist and is the owner and operator of 2 glass blowing studios in the San Francisco Bay Area — Half Moon Bay Art Glass and Mare Island Art Glass. Douglass believes in sharing hot glass experiences with anyone who wants to learn about the processes of blowing and sculpting glass. When not teaching, Douglass creates glass art that is a mix of his takes on nature and functional glassware. He has also created the Glass Troubadours, which is a mobile glass-blowing studio that hosts parties and events, and visits craft shows.

Douglass Brown

Glass Artist

Expert Answer

To cut wine glass, wear safety glasses and gloves, then prepare the glass surface by cleaning it. Before scoring, apply a small amount of oil to the glass cutter for smoother cutting. Score around the wine circumference for a clean cut on a wine bottle. Subsequently, expose the bottle to alternating hot and cold water until it splits along the score. Another effective method involves scoring around the bottle and using a small butane torch, typically used for culinary purposes. Apply heat to the scored edge while keeping the bottle spinning, perhaps on a record player or Lazy Susan. This technique, known as hot popping in the glassblowing community, proves more efficient for achieving a precise break. Many drinking glasses are crafted using this method.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 0
Question

Do I need to buy specific glasses?

Community Answer

You can paint anything that is porcelain or glass.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 21
Question

Where can I buy paint pens?

Community Answer

Most craft, department and art stores will carry these.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 27

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Read Video Transcript

Tips

Always follow the paint manufacturer's directions when using the paints. Most paint bottles recommend leaving a 3/4 to 1-inch (2 to 2.5 cm) space between the paint and the rim of the glass.

Thanks
Helpful 23 Not Helpful 29
Ventilate your room! The paint odors will not be pleasant. If you feel lightheaded, step out of the room for fresh air and crack open a window if you can.

Thanks
Helpful 0 Not Helpful 1
Look into other creative ways to decorate wine glasses .

Thanks
Helpful 0 Not Helpful 2

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Follow the paint bottle directions. Most paint bottles will instruct the artist to allow a minimum space between the glass rim and the paint surface. This is a safety precaution which MUST be followed.

Thanks
Helpful 18 Not Helpful 10
Be careful - some glass paints have this warning on the back: "This product contains a chemical known to the state of California to cause birth defects or other reproductive harm". There are some glass paints that are considered "non-toxic" if this is of concern to you, so look for them instead.

Thanks
Helpful 3 Not Helpful 0

Things You'll Need

Wine or martini glass
Paper and pen for sketching
Newspaper/waxpaper (to protect the surface)
Rubbing alcohol
Paper towels
Q-tips
Paint (enamels, acrylics, etc.)
Varnish, top or bottom coats (depending on paint type)
Paint thinner (optional)
Paintbrushes, sponges, etc.
Oven
Cookie sheet covered in foil

You Might Also Like

[1]

[2]

[3]

[4]

[5]

Log in

How to Paint Wine Glasses

Steps

Readying the Glass

Designing Your Glass

Setting the Paint

Expert Q&A

Video

Tips

Warnings

Things You'll Need

You Might Also Like

Expert Interview

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories