How to Paint a Beadboard

PDF download Download Article
PDF download Download Article

If you’ve recently had beadboard accents installed in your home, you may be wondering about the best way to paint them in order to achieve a more customized look. While there are several techniques for painting beadboard and other styles of wood paneling, the fastest, most efficient method is to apply a heavy preliminary coat with a roller. You can then go back and use a handheld brush to smooth out the textured finish and work the paint deeper into the paneling’s signature grooves.

Part 1
Part 1 of 3:

Patching and Caulking Beadboard

PDF download Download Article
  1. Patch nail holes and other damaged spots with a durable wood filler. For each hole you encounter, scoop up a dime-sized glob of wood filler with the tip of a flexible putty knife and carefully work it into the hole. Then, use the flat side of the blade to spread the compound until it’s smooth and level. [1] [2]
    • Overfill the holes slightly so that the surface around them appears raised. Wood filler has a tendency to shrink a bit as it dries. [3]
    • It’s important to use wood filler for this step rather than spackle, as spackle is designed for use on drywall and beadboard is made from pressed composite wood.
  2. Most wood fillers are designed to dry within 15-30 minutes, but some could take as long as 8 hours to set completely. Avoid handling the compound in the meantime. For more specific information on drying times, check the instructions provided on the packaging of the specific product you’re using. [4]
    • If you touch the filler while it’s still wet, you could accidentally leave behind small depressions or other imperfections and be forced to repeat the process to correct your mistake.
    • The compound will harden as it sets up, blending in with the surrounding surface to create a seamless appearance.
    Advertisement
  3. Run the sandpaper over the dried compound using tight, circular strokes with moderate pressure. Keep sanding until the mounded filler is level with the surface of the surrounding paneling. There should be no significant difference between the two materials in terms of depth. [5]
    • When you’re finished sanding, give the patched surface a quick wipedown with a damp cloth or paper towel to remove loose dust and debris.
    • A sheet of sandpaper with a grit somewhere between 120- and 220- will work best for this task. [6]
  4. Squeeze a thin line of caulk into any spots where you notice a gap between the paneling and the edges of neighboring surfaces. This will usually include interior corners, the joints between panels, and the strip where the bottom of the paneling runs up against the baseboards. [7]
    • Wait until the caulk solidifies and loses its tackiness before moving on. With most sealants, this will take around 20-30 minutes.

    Warning: Only use as much caulk as necessary to completely fill in each area. Heaping it on too thick could cause visible textural inconsistencies in the surface after it’s been painted.

    5. Advertisement
Part 2
Part 2 of 3:

Priming the Surface

PDF download Download Article
  1. Run the sandpaper along the length of each individual board, being sure to follow the wood’s natural grain pattern. [8] When you reach a groove between two boards, drape the sheet over your fingertips to reach down deeper. Afterwards, wet a soft cloth or paper towel and wipe the entire surface to pick up as much dust as possible. [9]
    • Spongey sandpapers will do a better job of getting down into the contours of the beadboard that ordinary types.
    • Scuffing up the wood will encourage the primer stick, which will in turn help your paint to coat properly.
  2. Pour about 2 inches (5.1 cm) of primer into a paint tray or similar shallow container. Dip your roller into the primer and move it back and forth to thoroughly saturate the nap. Let the excess primer drip off into the tray before getting started. [10]
    • To make swifter work of priming and painting, fit your roller with a wool cover with a 3 ⁄ 8 – 3 ⁄ 4  in (0.95–1.91 cm) nap that will hold lots of primer. [11]
    • Loading your roller a little heavier than you would for ordinary painting jobs will make it easier to work the primer into the slender grooves in the beadboard.

    Tip: Consider using an oil-based primer instead if your beadboard paneling is in a part of your home that’s subject to frequent changes in temperature or high humidity levels, like the kitchen or a hallway near one of the entrances. [12]

  3. Press your roller into the surface firmly and glide it from side to side with short overlapping strokes. This technique makes it possible to push much more primer into the grooves than you could using vertical strokes. As you roll, keep an eye out for missed spots on the face of the boards and pause to go back over them if necessary. [13]
    • Don’t worry too much about drips or inconsistent coverage. You’ll be taking care of these issues in the next step.
  4. While the primer is still wet, take a small angled brush and glide it up and down the length of each groove. This will cover any spots that your roller couldn’t quite get to. It will also smooth over any stippling left behind by the textured roller for a flatter, more seamless finish. [14]
    • It may help to load your brush with a small amount of fresh primer when going over areas with especially light or spotty coverage.
    • A 2 1 ⁄ 2  in (6.4 cm) angled rat tail sash brush is ideal for painting surfaces like beadboard that have lots of intricate contours. [15]
  5. Work your way along the paneling from end to end, top to bottom. Restricting yourself to more compact sections will give you plenty of time to apply the primer, back-brush the grooves, and review your handiwork before the primer begins to dry. [16]
    • Reload your roller with fresh primer each time you start a new section.
  6. It’s crucial that your paint have a nice, dry surface to adhere to. Fortunately, water-based primers tend to dry rather quickly. In a couple short hours, you’ll be ready to get painting! [17]
    • Oil-based primers typically take several hours longer to dry than water-based ones. If you opted for an oil-based primer, it will likely need 8-12 hours to set to the point where it can be painted over safely.
    7. Advertisement
Part 3
Part 3 of 3:

Painting the Paneling

PDF download Download Article
  1. Fill an unused paint tray with roughly 2 inches (5.1 cm) of your paint of choice and coat the outside of your roller cover thoroughly, just like you did during the priming phase. Then, drain any excess paint clinging to your roller so it doesn’t end up anywhere it’s not supposed to be. [18]
    • Either clean the roller you used to prime the surface with soap and warm water and allow it to air-dry prior to painting or slide on a separate roller altogether. For best results, use a roller cover with nap at least 3 ⁄ 8 inch (0.95 cm) high.
    • You can use any kind of interior paint you like here, but many experts recommend an oil-based trim paint with a satin or semi-gloss finish for long-lasting color capable of standing up to moisture, sunlight, and general wear and tear. [19]
    • When using a roller to paint wood paneling lined with deep crevices, it’s always a good idea to start with more paint than you think you realistically need.
  2. Starting somewhere on the upper part of the surface, drag your roller across the boards in an overlapping ‘Z’-shaped pattern. Work your way across the paneling 3 ft (0.91 m) square sections. [20]
    • Painting horizontally as opposed to straight up and down will help guarantee more complete coverage, even down into the deepest recesses of the intermittent grooves.
  3. As soon as you finish painting one section of the beadboard, grab your trusty angle brush and go over the wet paint using fluid up-and-down motions. The result will be a velvety-smooth base coat that’s free of imperfections. [21]
    • Align the center of your brush with the middle of each groove. That way, the bristles on either side will even out the paint on the faces of the adjacent boards for an effortless overlapping effect.
    • You can also use your brush to cut in around corners and trim if you don’t want to risk getting too close with your roller.

    Tip: Turning your brush sideways can improve your coverage inside grooves that are more than about 1 ⁄ 4 inch (0.64 cm) deep.

  4. Generally speaking, water-based paints will dry to the touch in about one hour and be ready to receive a second coat in 3-4, while oil-based paints will need closer to 6-8 hours of drying time. Be sure to follow the guidelines laid out on the label of the particular paint that you’ve chosen for your project. [22]
    • Switch on the ceiling fan, leave your air conditioner running, or open a few doors or windows to ventilate your work area and speed things along.
    • Take care not to touch or allow anything to come into contact with the surface while the paint is still wet. This may require you to set up barricades to keep small children, curious pets, and unsuspecting visitors at a safe distance.
  5. In most cases, it will only take a couple of coats to achieve a smooth, flawless finish. [23] If you think your surface needs it, you can slap on a third coat to ensure uniform color. When you’re done, you’ll have an eye-catching, pleasantly homey accent piece to show for your efforts. [24]
    • Allow each of your follow-up coats to dry for at least 4-8 hours before rolling on a subsequent coat.
    6. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If possible, store your beadboard paneling indoors for at least 2-3 weeks before installing it. This will give the wood a chance to acclimate to the temperature and humidity inside your home.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • Wood filler compound
      • Flexible putty knife
      • 120-220-grit sandpaper
      • Latex caulk
      • 60-100-grit sandpaper
      • Paint roller
      • Water- or oil-based interior primer
      • Water- or oil-based interior trim paint
      • 3 ⁄ 8 – 3 ⁄ 4  in (0.95–1.91 cm) wool nap roller cover
      • 2 1 ⁄ 2  in (6.4 cm) angled rat tail sash brush
      • Soft cloth or paper towel
      • Water
      • Warm water and mild liquid dish soap (optional—for cleaning painting tools)
      • Acetone (optional—for cleaning painting tools)

      You Might Also Like

      How to
      Build a Fake Wall
      How to
      Build a Cinder Block Wall
      How to
      Build a Sound Proof Room
      How to
      Make Sure a Corner is Square with the 3-4-5 Rule
      How to
      Arrange Three Pictures on a Wall
      How to
      Form Concrete Walls
      How to
      Build a Brick Wall
      How to
      Put a Nail in a Concrete Wall
      How to
      Install Metal Studs
      How to
      Cut Corner Trim
      How to
      Soundproof Any Interior or Exterior Door
      How to
      Cut Skirting Boards
      The 11 Best Ways to Make a Room Less Echoey
      How to
      Build a Wood Retaining Wall
      Advertisement

      References

      1. ↑ Archie Guerrero. Commercial & Residential Painting Specialist. Expert Interview. 17 June 2021.
      2. ↑ https://www.bobvila.com/articles/how-to-fix-nail-holes/
      3. ↑ https://www.thisoldhouse.com/woodworking/21017152/how-to-choose-and-use-wood-filler
      4. ↑ https://www.bobvila.com/articles/how-to-use-wood-filler/
      5. ↑ https://www.remodelista.com/posts/how-to-fix-nail-holes-in-your-wall-remodeling-101/
      6. ↑ https://www.bobvila.com/articles/2145-quick-tip-choosing-sandpaper/
      7. ↑ https://www.youtube.com/watch?v=Bw13b8rLCIc&feature=youtu.be&t=17
      8. ↑ Archie Guerrero. Commercial & Residential Painting Specialist. Expert Interview. 17 June 2021.
      9. ↑ https://www.bhg.com/decorating/home-accessories/wall-art/how-to-paint-wood-paneling/
      1. ↑ https://sawdustgirl.com/quick-and-easy-way-to-paint-beadboard/
      2. ↑ https://www.bobvila.com/articles/best-paint-roller/
      3. ↑ https://www.thisoldhouse.com/walls/21015062/installing-painting-wood-beadboard
      4. ↑ https://www.younghouselove.com/how-to-paint-wood-paneling/
      5. ↑ https://www.thisoldhouse.com/walls/21015062/installing-painting-wood-beadboard
      6. ↑ http://www.acmehowto.com/paint/brush-types.php
      7. ↑ https://www.youtube.com/watch?v=Bw13b8rLCIc&feature=youtu.be&t=61
      8. ↑ https://www.paintspraypro.com/how-long-does-it-take-primer-to-dry/
      9. ↑ https://sawdustgirl.com/quick-and-easy-way-to-paint-beadboard/
      10. ↑ https://thecardswedrew.com/paint-beadboard/
      11. ↑ https://www.younghouselove.com/how-to-paint-wood-paneling/
      12. ↑ https://www.youtube.com/watch?v=Bw13b8rLCIc&feature=youtu.be&t=84
      13. ↑ https://www.bobvila.com/articles/how-long-does-it-take-paint-to-dry/
      14. ↑ Archie Guerrero. Commercial & Residential Painting Specialist. Expert Interview. 17 June 2021.
      15. ↑ https://countrylivinginacariboovalley.com/paint-wood-panelling/

      About This Article

      Thanks to all authors for creating a page that has been read 25,383 times.

      Did this article help you?

      Advertisement