How to Paint a Bumper

Painting your car's plastic bumper cover is an easy way to give your car a facelift. Start by removing the bumper cover and washing it thoroughly. If you have any shallow scratches or cracks, fill and sand the damaged area. Wipe the bumper cover down, then apply several coats of base coat, drying and sanding the paint between each layer. Add 2 layers of clear coat for extra shine and durability, then let the clear coat dry for 6 hours before driving or reattaching the bumper.

Quick Steps

  1. Remove the bumper or surround it with tape to protect the rest of your car.
  2. Wash the bumper, wet sand it with 600-grit sandpaper, and dry it.
  3. Spray on a layer of paint, let it dry, and then sand it with 1500-grit sandpaper.
  4. Paint, dry, and sand the bumper 1 to 2 more times.
  5. Spray on 1 layer of clear coat, let it dry, and spray on another coat to seal the paint.
Method 1
Method 1 of 3:

Prepping the Bumper

PDF download Download Article
  1. In order to keep from painting other parts of the car, you can either remove and paint the bumper separately or leave the bumper attached and carefully mask off the car body. Removing the bumper works best when you're repairing any scratches or cracks before repainting.
  2. Scrub the surface well with a tack cloth along with soapy water. Using a degreaser like kitchen soap will help remove dirt and oil, leaving your bumper cover clean and ready for paint. [1]
    Advertisement
  3. Run your hand over the bumper to find any rough spots. Wet sand down these areas by hand with a spray bottle and some 600-grit sandpaper. Keep a constant layer of water between the sandpaper and bumper by spraying the area you're working on. [3]
    • Make sure to alternate directions as you sand, moving back and forth as well as up and down, in order to achieve a smooth, flawless finish.
  4. Remove any dirt and dust from sanding with the soft cloth. The surface should be clean and dry in order for the paint to adhere properly. [4]
    5. Advertisement
Method 2
Method 2 of 3:

Applying Paint

PDF download Download Article
  1. Hold the gun or can about 12 inches (30 cm) away from the surface and use steady, sweeping motions to apply the base coat paint, which should be the same color as the rest of the car. [5] Overlap each pass by 50% for smooth, even coverage. Let the layer dry for 30 minutes. [6]
    • To protect yourself from harmful fumes, make sure to wear protective gear such as a face mask and gloves while painting.
    • If you're using a spray can make sure to spray a bit of paint away from the bumper several times to clear out the nozzle. [7]
  2. After the first layer has dried, check for any drips or imperfections. Wet sand them smooth with a spray bottle and sandpaper. Wipe away any dust with a clean tack cloth. [8]
  3. Always wipe down the bumper cover with a clean tack cloth after sanding the new layer. Apply up to 3 coats total, or until the paint has full, even coverage.
  4. Hold the can or clean spray gun of clear coat about 12 inches (30 cm) away from the bumper and spray on the clear coat in light, sweeping layers. Let the layer dry for 20 minutes, then apply a second coat and let it dry as well. [9]
    • Each time you go over the bumper with the clear coat, overlap the previous pass by 50% for the best coverage. [10]
  5. This time will let the paint cure and harden fully. The longer it dries, the longer the paint will hold up and remain durable, so you could even wait up to 24 hours. [11] After the minimum 6 hours, you can remove any tape and masking materials from the car or reattach the bumper to the body.
    6. Advertisement
Method 3
Method 3 of 3:

Repairing Shallow Cracks and Scratches

PDF download Download Article
  1. Different car manufacturers use different ways to attach the plastic cover, such as screws, tabs, bolts, and other fasteners. Examine your bumper to find the connection points, then remove any fasteners and slide the bumper free. [12]
    • These connection points may be near the trunk latch, tail lights, or wheel wells, as well as hidden beneath bumper fascia.
  2. Use some coarse sandpaper to lightly scuff up the plastic. Scuffing helps remove dirt buildup and creates a rougher texture to help the adhesive bond with the surface. After scuffing, wipe the area down with a plastic surface cleaner on a soft, clean cloth to remove any leftover dirt or grease. [13]
  3. Pour some clean water over the area, removing any residue from the surface cleaner. Set the bumper on an old towel and leave it until it feels completely dry. [14]
  4. Use a clean cloth to spread prep solvent over the area. Prep solvent removes contaminants from the area, so make sure to only wipe it on in 1 direction instead of back and forth. Wiping in 2 directions will drag contaminants back into the repair area. Once the solvent is dry, sand the area by hand with 80-grit sandpaper. [15]
  5. The kind of filler you use depends on the type of plastic your bumper is made of, which is indicated on the back of the bumper cover with stamped initials. Call or go in to ask someone at the counter of an auto repair store for some filler product recommendations before purchasing.
    • The plastic types PP (polypropylene), PPO (polyphenylene oxide), and TPE (thermoplastic elastomer) will smear easily when ground or machine-sanded. Plastic types PUR (polyurethane plastic rigid) and TPUR (thermoplastic polyurethane elastomer) will turn to powder when they're ground or sanded down.
    • The brand doesn't necessarily matter, but you should stick with the same brand throughout the entire repair process for the best results.
  6. Mix equal amounts of filler and hardener on a clean piece of cardboard. Use a putty knife to smooth the filler into any cracks that are less than 0.25 inches (0.64 cm) deep and leave a little extra on top. This way, when the filler dries and shrinks slightly, the cracks will still be filled. [16]
  7. Start with 80-grit sandpaper, then move to 120-grit paper to level out the surface. Finish by wet-sanding with 400-grit paper to smooth everything down to the bumper's natural contour. [17]
  8. Use a putty knife to spread the flexible part sealer over the filled-in area. Apply both layers immediately after the other while they're wet. After letting the sealer dry for 30 minutes, you're ready to start priming and painting.
    10. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Once you have painted the bumper, you should polish it regularly to maintain the shine and brightness.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Painter's tape
      • 600-grit sandpaper
      • 1500-grit sandpaper
      • Degreaser and water
      • Clean tack cloths
      • Basecoat
      • Clearcoat
      • Spray cans or spray gun
      • Protective gear

      Warnings

      Advertisement

      You Might Also Like

      How to
      Paint a Car
      How to
      Paint a Car with a Spray Can
      How to
      Fit a Steering Wheel Cover
      How to
      Apply Vinyl Wrap
      How to
      Prep a Car for Paint
      How to
      Sand a Car for Repainting
      How to
      Do a Good Base Coat Clear Coat Paint Job
      3 Soft Resets + Troubleshooting Steps for a Glitchy Tesla Screen
      How to
      Install Fender Flares
      How to
      Design a Car
      How to
      Install a No Drill Mud Flap
      How to
      Paint Brake Calipers
      How to
      Paint a Car Interior
      How to
      Custom Paint a Car Dashboard
      Advertisement

      References

      1. ↑ https://www.bodyshopbusiness.com/painting-plastic/
      2. ↑ Chad Zani. Auto Detailing Expert. Expert Interview. 2 October 2019.
      3. ↑ https://www.tiktok.com/@berriozabalalejandro/video/7140345187158478126
      4. ↑ https://www.tiktok.com/@berriozabalalejandro/video/7140345187158478126
      5. ↑ https://youtu.be/t1uObNWHfAQ?t=341
      6. ↑ https://www.tiktok.com/@berriozabalalejandro/video/7140345187158478126
      7. ↑ https://youtu.be/t1uObNWHfAQ?t=259
      8. ↑ https://www.tiktok.com/@berriozabalalejandro/video/7140345187158478126
      9. ↑ https://www.tiktok.com/@berriozabalalejandro/video/7140345187158478126
      1. ↑ https://youtu.be/t1uObNWHfAQ?t=341
      2. ↑ https://youtu.be/t1uObNWHfAQ?t=481
      3. ↑ https://www.popularmechanics.com/cars/how-to/a650/2763656/
      4. ↑ https://www.popularmechanics.com/cars/how-to/a650/2763656/
      5. ↑ https://www.popularmechanics.com/cars/how-to/a650/2763656/
      6. ↑ https://www.popularmechanics.com/cars/how-to/a650/2763656/
      7. ↑ https://www.popularmechanics.com/cars/how-to/a650/2763656/
      8. ↑ https://www.popularmechanics.com/cars/how-to/a650/2763656/

      About This Article

      Article Summary X

      To paint a bumper, start by removing the plastic bumper cover and washing it thoroughly with degreaser and water. Then, wet sand any rough spots with 600 grit sandpaper. Wipe the bumper clean and dry it with a soft cloth, then spray on a base coat layer. After the base coat dries for 30 minutes, wet sand any new imperfections with 1500 grit sandpaper. Wipe the bumper smooth. Repeat the process of painting, drying, then sanding 1-2 more times. Make sure to wipe the bumper with a clean tack cloth after sanding each new layer. Once the paint has full, even coverage, apply 1 layer of clear coat to seal in the base coat. After drying for 20 minutes, apply a 2nd layer of clear coat and let dry for another 20 minutes. Before reattaching your bumper, wait at least 6 hours for the paint to harden fully. The more time the paint dries the more durable it will be, so waiting 24 hours is best. For more information on how to refurbish your car’s bumper, scroll down.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 189,086 times.

      Did this article help you?

      Advertisement