How to Paint a Metal Bed Frame

PDF download Download Article
PDF download Download Article

If you want an affordable way to update an old metal bed frame or repair damage, a fresh coat of paint is an easy way to refresh how it looks. Whether you’re using spray paint or applying paint with a brush, this DIY project is one that anyone can do with a little prep work. Keep reading to learn the best ways to paint your bed frame and make your room look more stylish!

Method 1
Method 1 of 3:

Cleaning and Priming the Bed Frame

PDF download Download Article
  1. Try to break down your bed frame as much as you can so you avoid missing any spots and get even paint coverage. Take pictures or write down where each of the fasteners go so you can reassemble your bed when you’re finished.
    • Keep any screws, nuts, bolts, or any other hardware in a small container so you don’t lose them.
  2. If you have space outside or in a garage, move your bed frame there while you’re painting. Otherwise, open the windows in the room where you’re painting and point a fan so it blows outside to help improve the air flow and get rid of vapors. [1]
    Advertisement
  3. Spread a large drop cloth over the floor where you’re working to catch any drips or overspray. Put the pieces of your bed frame down so they have a little bit of space between them. [2]
    • Prop the bed frame up on saw horses or against a wall covered with a drop cloth if you don’t want to crouch down to paint them on the floor.
  4. Wet a cloth with hot water and lather in a few drops of dish detergent. Wipe off any dust, dirt, or stuck-on residue from your bed frame. Pay special attention to the corners and crevices where dirt could get caught. Wipe the metal as dry as you can with a towel. [3]
  5. A wire brush has stiff bristles that help break apart blemishes or peeling paint. Apply moderate pressure as you scrub your bed frame so you can remove all of the visible rust and peeling paint that’s still on the surface. [4]
  6. Paint has trouble sticking to slick metal surfaces, so 150-grit sandpaper roughs up the surface without leaving big scratches. Apply light pressure as you rub the sandpaper over your entire bed frame. [6]
    • If you used a wire brush that left scratches on your bed frame, going over it with 150-grit sandpaper will help hide the blemishes.
  7. Sanding and removing rust leaves a lot of residue on the surface that could prevent your paint from sticking. Wet a clean cloth with warm water and run it over your bed frame one last time to lift any loose particles. [7]
    • If there’s a lot of dust or residue, use a vacuum to suck it up.
  8. Choose a spray primer made specifically for metal since it reaches into nooks and crannies and will bond to your bed frame a lot better. Shake the primer for about a minute and hold it 1 foot (30 cm) away from your bed frame. Spray an even coat of primer over the entire surface using short sweeping movements. [8] Let the primer dry completely for 24 hours before you start painting. [9]
    • While spray primer is easier, you can also brush a thin coat of metal primer onto your bed frame with a long-bristled square paintbrush.
    9. Advertisement
Method 2
Method 2 of 3:

Spray-Painting a Metal Bed Frame

PDF download Download Article
  1. Spray paint made for metal is the quickest and easiest way to paint your bed frame. Make sure the paint you buy is specifically made to use on metal and rust-resistant so it forms the best bond with the surface. [10]
    • Spray painting gives you a smoother application and takes less time than brushing paint on your bed frame.
  2. Shake the can of paint for 30 seconds and spray it on a scrap piece of cardboard to test it. Hold the can 1 foot (30 cm) from your bed frame and use sweeping left-to-right motions to coat the paint the metal in an even coat. [11]
    • Keep the nozzle on the spray can moving to help prevent drips or spots on the surface. If you notice any forming on your bed frame, wipe off the excess paint with a dry lint-free cloth.
    • Avoid spray painting outside if it’s windy since you won’t get solid coverage.
  3. Spray paint dries to the touch pretty quickly, so you can apply multiple coats within an hour. Give the paint at least 10 minutes before testing if it’s dry with your finger on an inconspicuous spot. [12]
    • The temperature and humidity can make paint take longer to dry. Always do a touch test with your finger before you apply another coat.
  4. Carefully turn the bed frame pieces over to their unpainted sides and finish applying the first coat of spray paint. Work over the surface using left-to-right sweeping motions. When you finish, give the paint another 10 minutes to dry before you move on.
  5. Go over the pieces again with a light coat of paint moving the can in the opposite direction as your first coat. Be sure to focus on any areas where the paint looks thin and the primer still shows through. Let the first side dry for 10 minutes before flipping your bed frame again and painting the other side. [13]
  6. Check on your paint after another 10 minutes of drying time to see if any of the primer shows through the paint. If you can still see some of the primer or the paint doesn’t have consistent color, then apply another coat. [14]
  7. Even though spray paint quickly dries to the touch, it’s not completely dry right away. Leave your bed frame alone for at least a day so you don’t ruin any of the paint finish. [15]
    • Put a fan near your bed frame to help speed up your drying time.
  8. Clear coat lacquer coats the paint to make it shine and keep it safe from damage. Hold the lacquer about 1 foot (30 cm) from the bed frame and spray a thin layer onto the surface. Let the lacquer dry for 1 day so it has time to set. [16]
    • You don’t need to apply lacquer if you don’t want to.
  9. Reference any pictures or notes you took when you disassembled your bed frame so you can build it correctly. Once you get the bed frame reassembled, you can use it as normal.
    10. Advertisement
Method 3
Method 3 of 3:

Brush-Painting a Metal Bed Frame

PDF download Download Article
  1. Exterior acrylic paint is water-based and gives you more even coverage on metal. Exterior paint also has sealer built into it, so it will be more durable to damage or chipping. You’ll only need 1 can to coat your entire bed frame. [17]
    • Avoid applying water-based acrylic paint to bare metal since it could cause rust. Primer will protect your bed frame from any damage.
  2. Dip your paintbrush into the can of paint and wipe off any excess on the lip. Brush a thin layer of paint onto the bed frame pieces using long sweeping strokes so the brush marks are less noticeable. Coat as much of the surface as you can with paint so it has even coverage. [18]
    • Thin layers will dry more evenly than thick patches of wet paint.
    • Use smaller brushes to help reach into corners, nooks, or crannies that are hard to reach on the bed frame.
  3. Give your paint some time to dry to the touch before you move on. Run a fan in the room where you’re painting to help speed up your dry times. Test if the paint feels dry after a few hours by touching it with a finger in an inconspicuous spot. [19]
    • If it’s humid, your paint may take longer to dry.
  4. Since there are still some unpainted sections of your bed frame, turn the pieces over to their other side. Use your brush to finish the first coat of paint and cover all of the areas you missed. Give the second side of the bed frame another 3–4 hours to dry.
  5. Use another thin layer of acrylic paint for your second coat, focusing on any areas where you can still see the primer through the paint. Try to get even coverage over the entire bed frame and drag the bristles slowly across the surface to prevent them from making any marks. [20]
    • When the first side is dry again, be sure to flip over the bed frame and finish the second coat on the other side.
  6. Even if your paint feels dry to the touch, leave the bed frame alone for at least 2 days before you plan on using it. Once all of the paint has dried, piece together your bed frame and screw it back together. Make sure to tighten all of the hardware so it doesn’t feel loose or come undone. [21]
    • You don’t need to apply a layer of clear coat lacquer or sealer since it’s already built into the paint.
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What should I do if the spray paint runs?
    Community Answer
    Immediately wipe off the run and re-spray it right then and there. If the piece was left to dry and you didn't wipe it in time, then you'll need to scrape off the bulk and sand the area perfectly flat and smooth to its surroundings for a paint touch-up.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 6
  • Question
    I have a new metal bed and I want to paint it. Do i still need to sandpaper it before I begin?
    Community Answer
    Yes. It helps the paint stick. If you don't sand it, the smooth surface of the paint underneath can cause issues.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 9
  • Question
    I was spray painting my metal daybed and many drips dried. I had to sand them down. In the future, how do i prevent that from happening?
    Brett Gilbert
    Top Answerer
    It's usually from adding too much paint at once. Some of it doesn't stick in place, so it drips. Try moving the canister at a faster rate. Aim on applying a light but even coat of paint. Then, wipe up drips as soon as you notice them.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 4
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Paint Ceramic Plates
      How to
      Paint over Varnish
      How to
      Paint Your Carpet
      How to
      Remove Paint from Wood
      How to
      Paint Bamboo Furniture
      How to
      Paint an Old Wooden Chair
      How to
      Paint a Lampshade
      How to
      Stain Wood Filler
      How to
      Paint Plastic Furniture
      How to
      Coat Something in Silicone
      How to
      Paint Laminate Furniture
      How to
      Paint Pine Furniture
      Advertisement

      References

      1. ↑ https://www.cpsc.gov/s3fs-public/painting.pdf
      2. ↑ https://www.bobvila.com/articles/how-to-spray-paint-metal/
      3. ↑ https://www.nytimes.com/1975/07/13/archives/right-primer-is-needed-when-painting-metal.html
      4. ↑ https://www.thisoldhouse.com/painting/21124752/how-to-repaint-a-rusty-metal-hand-rail
      5. ↑ Kevin Snow. Commercial Painting Professional. Expert Interview. 23 March 2022.
      6. ↑ https://www.thisoldhouse.com/painting/21124752/how-to-repaint-a-rusty-metal-hand-rail
      7. ↑ https://www.bobvila.com/articles/how-to-paint-metal/
      8. ↑ https://www.bobvila.com/articles/how-to-paint-metal/
      9. ↑ Kevin Snow. Commercial Painting Professional. Expert Interview. 23 March 2022.
      1. ↑ Kevin Snow. Commercial Painting Professional. Expert Interview. 23 March 2022.
      2. ↑ https://www.bobvila.com/articles/how-to-spray-paint-metal/
      3. ↑ https://www.bobvila.com/articles/how-long-does-it-take-for-spray-paint-to-dry/
      4. ↑ https://www.rustoleum.com/-/media/DigitalEncyclopedia/Documents/RustoleumUSA/TDS/English/CBG/Automotive/ATO-68_Metal_Coat_TDS.ashx
      5. ↑ https://youtu.be/nNKzOm7DS_k?t=112
      6. ↑ https://www.bobvila.com/articles/how-long-does-it-take-for-spray-paint-to-dry/
      7. ↑ https://www.bobvila.com/articles/how-to-paint-metal/
      8. ↑ https://www.bobvila.com/articles/best-paint-for-metal/
      9. ↑ https://youtu.be/W2sTKeWdwlk?t=79
      10. ↑ https://www.bobvila.com/articles/how-to-paint-metal/
      11. ↑ https://www.homenish.com/how-to-use-acrylic-paint-on-metal/
      12. ↑ https://www.homenish.com/how-to-use-acrylic-paint-on-metal/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 295,132 times.

      Reader Success Stories

      • Pam Stepps

        Aug 26, 2017

        "All of it helped. Very good instructions!"
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement