How to Paint a Table

Painting is a great way to update an old table and cover up any imperfections. Although the process may seem daunting, it’s actually fairly straightforward. Start preparing the table’s surface by sanding, then apply a primer. [1] After the primer is dry, paint the table in a well-ventilated area and let it dry between each coat. Once the paint has dried, finish with a protectant formula to seal in the paint job. Let that layer dry, and your table is ready to be used!

Part 1
Part 1 of 3:

Prepping the Table

PDF download Download Article
  1. If your table has a leaf, pull it slightly open so the leaf doesn’t touch the edges of the main table. This way, the paint won’t seal the pieces together when it dries.
    • If your table has no leaf, there’s no need to take pieces apart. [2]
  2. Watermark wikiHow to Paint a Table
    [3] Use an orbital sander with some medium-grit sandpaper to sand the top of the table smooth. [4] Go slowly and be careful not to gouge the surface. Don’t worry about removing all of the varnish, but sand down enough that the table isn’t too glossy and the primer will stick. [5]
    • If your table is unvarnished, use 150-grit sandpaper to sand the table’s surface smooth.
    • Always remember to wear protective gear when sanding. Before you begin, put on gloves, eye protection, and a mask.
    Advertisement
  3. Watermark wikiHow to Paint a Table
    Use a tack cloth to remove any dust, lint, and residue from the table, including the top and legs. [6] All surfaces must be clean and dry in order for the primer to adhere. [7]
  4. Watermark wikiHow to Paint a Table
    Roll-on/brush-on formulas are best for high-traffic surfaces like tables, since they tend to be thicker and more durable than spray-on formulas. Apply 1 coat of primer with a mini foam roller or medium to small brush. Let that layer dry before applying a second coat and letting it dry as well. [8]
    • Primer helps the paint stick to the wood and covers up any stains and discoloration. [9]
    • Make sure to roll or brush the primer in the direction of the wood grain. [10]
    • In between coats, wrap your roller or brush in a plastic bag and place it in the fridge. This will keep the paint moist and save you cleaning time in between layers. [11]
  5. Watermark wikiHow to Paint a Table
    If your table has lots of inset details or crevices that are difficult to paint over, use a spray-on formula to fill these areas in. [12] This way, you’ll get an even base for the paint.
  6. Watermark wikiHow to Paint a Table
    To finish preparing the table for painting, sand the primed surface smooth with fine-grit sandpaper. [13] The orbital is too strong for the layer of primer, so sand gently by hand.
  7. Watermark wikiHow to Paint a Table
    Clean away any dust or debris from sanding. In order for the paint to properly adhere, make sure that the table is completely clean and dry before you begin painting.
    8. Advertisement
Part 2
Part 2 of 3:

Applying Paint

PDF download Download Article
  1. Choose an area with ventilation for paint fumes that won’t be in direct sunlight or affected by strong breezes. Make sure there’s enough room to walk around the table while painting.
    • Generally, temperatures from 55 to 70 °F (13 to 21 °C) are best for painting. [14]
  2. All 3 look beautiful and are easily washable. However, they vary when it comes to durability and user-friendliness.
    • Enamel-based paints are known for being hard, durable, rust-resistant, and easily washable.
    • Latex-based paints are also easy to clean and look beautiful, but they don’t cure as well and are nowhere near as durable.
    • Oil-based paints have a strong, unpleasant smell and must be cleaned up with special solvents, but they sink into the wood as they cure, making them extremely durable and easily washable.
  3. Semi-gloss is best for kitchen tables because it’s tough, easy to clean, and hides fingerprints and smudges better than a flat-finish paint.
    • If you choose a glossy finish, go for a semi-gloss indoor latex paint or a water-based enamel paint. [15]
  4. Flat finishes work well for console tables or coffee tables because a smooth, matte finish hides any imperfections in the table’s textures. However, it is difficult to clean without damaging the paint job, so make sure not to use it on high-traffic surfaces. [16]
    • If you’re not sure if you want flat or semi-gloss finish, start with a flat-finish paint. If you later decide that you prefer gloss, you can cover the flat paint with a satin or semi-gloss finish. [17]
  5. Watermark wikiHow to Paint a Table
    Use a brush to paint any crevices first. Next, use a 4 in (10 cm) foam roller to apply a thin layer of paint to the table's flat surfaces. The foam roller will create a smooth, even finish without any brushstrokes. Be careful to avoid drips around the table’s edges and try to make the transition between brush and roller as level and smooth as possible.
    • Use a synthetic bristle brush with a latex-based paint, and a natural bristle brush for oil-based paint.
    • Always paint in the direction of the natural wood grain.
  6. Waiting 24 hours will give the paint time to settle and adhere to the primed surface. Make sure the table dries in a shaded area so direct sunlight won’t affect the quality of the paint.
  7. Watermark wikiHow to Paint a Table
    Let each layer dry for 24 hours, then lightly sand and wipe down the surface before applying the next layer of paint. With some fine-grit sandpaper, gently sand down any drips and imperfection to even out the paint’s level. The orbital can be too strong for the primer and paint, so sand by hand to smooth and protect each layer.
    • Generally, 2-3 layers should be enough for lighter paints. Darker colors may need additional coats to get an even finish. [18]
    • Check for drips in areas where you switched between brush and roller.
  8. Watermark wikiHow to Paint a Table
    After sanding, always wipe away dust and debris with a tack cloth. This will help you achieve a smooth, professional finish. [19]
  9. Although the paint will feel dry to the touch in a day or 2, it actually needs 3-7 days to “cure,” or fully harden. This is especially important with oil- and enamel-based paints. If you don’t let the table cure long enough, it will be more prone to chipping and peeling. [20]
    • Avoid touching the surface and keep it in a dry, shaded space while it cures.
    10. Advertisement
Part 3
Part 3 of 3:

Finishing the Tabletop

PDF download Download Article
  1. If you want a final exterior layer of protection for your paint job, you can apply a finishing protectant to the tabletop. [21] This is especially important for kitchen tables because it makes the surface easier to clean. [22]
  2. Watermark wikiHow to Paint a Table
    Because finishing wax won’t alter your paint’s color, it works great over light colors. To apply it, dip a clean cotton cloth into some clear paste wax and apply it evenly over the table’s surface. Let it dry for at least an hour, then buff away the excess with a clean cloth or electric polisher. Repeat the process 3-4 times until you’ve built up a tough exterior. [23]
  3. Watermark wikiHow to Paint a Table
    These protectants work well on darker colors that can hold up against the finish’s slight color alteration. To apply either finish, lightly sand the tabletop with 320-grit sandpaper and wipe away any dust. Use a foam roller to apply a thin layer of protectant. Let it dry for 2 hours. Repeat this process 3-4 times. [24]
    • Because these finishes tends to yellow over time, avoid using them over white or very light colors. [25]
    • When applying the protectant with a foam roller, make sure to go slowly to prevent bubbles from forming.
  4. No matter which protectant you used, wait at least 2 full days before placing anything on the table. Disturbing the layers of while they’re curing could alter the topcoat’s strength, which is especially important on kitchen tables. [26]
    • You should also wait 1 week before using any cleaning products or chemicals on the table.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What paint should I use if I would like to paint my table black?
    Andres Matheu
    Commercial Painter
    Andres Matheu is the Owner of Hömm Certified Painting Systems, an Interior and Exterior Residential painting business based in the Washington, DC Metro area. Andres specializes in interior and exterior residential painting, color consultations, cabinet refinishing, wallpaper removal, and epoxy flooring among other services. An EPA Lead-safe Certified Firm, Hömm Certified Painting Systems has been awarded the Best of Houzz 2019 Service, Angie's List Super Service Award 2019, and Northern Virginia Magazine's 2018 Best Home Experts (painters) award.
    Andres Matheu
    Commercial Painter
    Expert Answer
    When painting a table black, I would use a black enamel with a semi-gloss finish. It's gonna be glossy, but enamels perform better when it comes to furniture.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 3
  • Question
    Is it better to use a small foam or fluffy roller to do a kitchen table top?
    Community Answer
    It depends on the type of the table/counter top. If it's marble then use a small foam roller and then glaze it, but if it's plastic, use a fluffy roller.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You’ll Need

      • Medium-grit sandpaper
      • Fine-grit sandpaper
      • Orbital sander
      • Tack cloths
      • Roll-on/brush-on primer
      • Spray-on primer (for corners and crevices)
      • Foam roller or bristle brush
      • Paint
      • Protectant/wax finish
      • Dust mask
      • Protective gear

      Tips

      • Shine a light along the main surface of the table while you paint. Angled light will help you spot any drips or imperfections.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      You Might Also Like

      How to
      Paint Ceramic Plates
      How to
      Paint over Varnish
      How to
      Paint Your Carpet
      How to
      Remove Paint from Wood
      How to
      Paint Bamboo Furniture
      How to
      Paint an Old Wooden Chair
      How to
      Paint a Lampshade
      How to
      Stain Wood Filler
      How to
      Paint Plastic Furniture
      How to
      Coat Something in Silicone
      How to
      Paint Laminate Furniture
      How to
      Paint Pine Furniture
      Advertisement

      References

      1. ↑ Andres Matheu. Commercial Painter. Expert Interview. 28 July 2020.
      2. ↑ https://www.erinspain.com/how-to-paint-furniture-a-beginners-guide/
      3. ↑ Andres Matheu. Commercial Painter. Expert Interview. 28 July 2020.
      4. ↑ https://www.erinspain.com/how-to-paint-furniture-a-beginners-guide/
      5. ↑ https://centsationalstyle.com/2012/03/painting-a-kitchen-table/
      6. ↑ http://www.countryliving.com/diy-crafts/tips/a266/paint-furnishings-and-learn-from-my-mistakes/
      7. ↑ Andres Matheu. Commercial Painter. Expert Interview. 28 July 2020.
      8. ↑ https://centsationalstyle.com/2012/03/painting-a-kitchen-table/
      9. ↑ https://www.realsimple.com/home-organizing/decorating/decorating-tips-techniques/how-to-paint-unfinished-wood-furniture
      1. ↑ https://www.realsimple.com/home-organizing/decorating/decorating-tips-techniques/how-to-paint-unfinished-wood-furniture
      2. ↑ https://www.realsimple.com/home-organizing/decorating/decorating-tips-techniques/how-to-paint-unfinished-wood-furniture
      3. ↑ https://centsationalstyle.com/2012/03/painting-a-kitchen-table/
      4. ↑ Andres Matheu. Commercial Painter. Expert Interview. 28 July 2020.
      5. ↑ https://centsationalstyle.com/2012/03/painting-a-kitchen-table/
      6. ↑ https://www.countryliving.com/diy-crafts/tips/a266/paint-furnishings-and-learn-from-my-mistakes/
      7. ↑ https://www.weekand.com/home-garden/article/recommended-paint-finishes-furniture-18002916.php
      8. ↑ https://www.realsimple.com/home-organizing/decorating/decorating-tips-techniques/how-to-paint-unfinished-wood-furniture
      9. ↑ https://www.erinspain.com/how-to-paint-furniture-a-beginners-guide/
      10. ↑ https://www.erinspain.com/how-to-paint-furniture-a-beginners-guide/
      11. ↑ https://www.weekand.com/home-garden/article/hard-finish-tabletop-after-painting-18065243.php
      12. ↑ Andres Matheu. Commercial Painter. Expert Interview. 28 July 2020.
      13. ↑ https://www.erinspain.com/how-to-paint-furniture-a-beginners-guide/
      14. ↑ https://www.weekand.com/home-garden/article/hard-finish-tabletop-after-painting-18065243.php
      15. ↑ https://www.weekand.com/home-garden/article/hard-finish-tabletop-after-painting-18065243.php
      16. ↑ https://www.weekand.com/home-garden/article/hard-finish-tabletop-after-painting-18065243.php
      17. ↑ https://www.weekand.com/home-garden/article/hard-finish-tabletop-after-painting-18065243.php
      18. ↑ https://centsationalstyle.com/2012/03/painting-a-kitchen-table/

      About This Article

      Article Summary X

      To paint a table, start by sanding down the tabletop to remove any varnish or imperfections. Next, apply 1 coat of primer, allow it to dry, then apply a second coat to help the paint stick to the wood. Once the primer is dry, sand the primed surface to smooth it out. Then, pick an enamel, latex, or oil-based paint and apply a thin, even layer over the entire table. After allowing it to dry for 24 hours, apply 2 to 3 more coats of paint, sanding each as you go. Finally, allow the paint to cure for 3 days before applying a finishing protectant. To learn how to use a finishing wax for lighter paint colors, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 72,259 times.

      Did this article help you?

      Advertisement